Beliani LED Dimmable Desk Lamp with Adjustable Arm

Product Overview

The Beliani LED Dimmable Desk Lamp, Model 379013, is designed to provide versatile lighting for various tasks. Featuring an adjustable arm, touch controls, multiple light temperature modes, and integrated wireless charging, this lamp combines functionality with a modern aesthetic.

Image: The Beliani LED Dimmable Desk Lamp in a modern office setting, showcasing its adjustable arm and sleek design.

Setup Instructions

This lamp is designed for immediate use and requires no assembly. Follow these simple steps to begin using your lamp:

1. Unpack: Carefully remove the lamp from its packaging.
2. Placement: Place the lamp on a stable, flat surface.
3. Connect Power: Plug the power adapter into the lamp's power input port, then connect the adapter to a standard electrical outlet (230V, 50Hz).

Operating Instructions

The lamp features intuitive touch controls located on its base.

Image: A close-up view of the lamp's base, highlighting the touch control panel and the integrated wireless charging pad.

• Power On/Off: Touch the ON/OFF icon to turn the lamp on or off.
• Adjust Brightness (Dimmer): With the lamp on, touch and hold the BRIGHT icon to gradually increase or decrease the light intensity. Release when the desired brightness is reached.
• Change Light Temperature: Touch the LIGHT icon to cycle through the three available light temperature modes:
  • Relax Mode: A warm light setting, ideal for unwinding.
  • Read Mode: A balanced light suitable for reading.
  • Work Mode: A brighter, cooler light for focused tasks.
• Adjust Lamp Arm and Head: The lamp features an adjustable arm and lampshade. Gently pivot the arm and rotate the lampshade to direct the light as needed.
• Wireless Charging: Place your compatible mobile phone or other electronic device on the designated wireless charging pad on the lamp's base. Ensure the device is centered for optimal charging. The charging function operates independently of the lamp's light.

Maintenance

The Beliani LED Desk Lamp is designed for easy maintenance.

• Cleaning: Disconnect the lamp from the power source before cleaning. Use a soft, dry cloth to wipe the lamp's surfaces. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
• Storage: If storing the lamp, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.

Troubleshooting

If you encounter issues with your lamp, please refer to the following common solutions:

• Lamp does not turn on:
  • Ensure the power adapter is securely plugged into both the lamp and the electrical outlet.
  • Verify that the electrical outlet is functional by testing it with another device.
• Light intensity or color temperature cannot be adjusted:
  • Ensure you are using the correct touch controls as described in the Operating Instructions.
  • Try turning the lamp off and on again.
• Wireless charging is not working:
  • Confirm your device is compatible with wireless charging (Qi standard).
  • Ensure your device is placed correctly and centered on the charging pad.
  • Remove any thick phone cases that might interfere with wireless charging.
  • Check if the lamp is connected to power.

If problems persist, please contact Beliani customer support for assistance.

Specifications

Image: A technical diagram illustrating the dimensions of the Beliani LED Dimmable Desk Lamp, including height, width, and base measurements.

Warranty and Support

For warranty information or technical support, please refer to your purchase documentation or contact Beliani customer service directly. Ensure you have your model number (379013) and proof of purchase available when contacting support.

You can typically find support contact details on the official Beliani website or through the retailer where the product was purchased.