lulaven iShare iOS Wireless HDMI Display Adapter (Model WF-001) Instruction Manual

1. Introduction

The lulaven iShare iOS Wireless HDMI Display Adapter (Model WF-001) provides a seamless solution for mirroring content from your iOS devices (iPhone and iPad) to a larger display such as a TV, monitor, or projector. This device facilitates the wireless transmission of videos, photos, documents, and games, enhancing your viewing and presentation experience without the need for complex applications or wired connections.

Image: The lulaven iShare iOS Wireless HDMI Display Adapter, shown connected to a TV, mirroring content from an iPhone. The adapter is a compact black device with an integrated HDMI cable.

2. What's Included

Upon unboxing your lulaven iShare iOS Wireless HDMI Display Adapter, you should find the following items:

• 1 x iShare iOS Wireless Display Adapter
• 1 x USB-C Charging Cable
• 1 x User Manual

3. Setup Guide

Setting up your iShare iOS Wireless HDMI Display Adapter is a simple three-step process:

1. Connect to Display: Plug the HDMI connector of the iShare iOS adapter into an available HDMI port on your HDTV, monitor, or projector.
2. Provide Power: Connect the USB-C charging cable to the adapter and plug the USB-A end into a 5V/1A (or 5V/2A) wall adapter (not included) or an available USB port on your TV/monitor. A stable power supply is crucial for optimal streaming quality.
3. Select Input: Switch your TV or monitor's input source to the corresponding HDMI port where the iShare adapter is connected. You should see the iShare iOS setup screen appear.

Image: Visual guide showing the three simple steps for setting up the iShare iOS Wireless HDMI Display Adapter: plugging into an HDTV, connecting to a wall outlet for power, and switching the TV input to HDMI.

4. Operating Instructions

Once the iShare iOS setup screen is visible on your display, follow these steps to begin screen mirroring:

1. Enable Wi-Fi/Cellular Data: On your iPhone or iPad, ensure Wi-Fi or cellular data is turned on.
2. Access Control Center: Swipe down from the top-right corner (for newer iOS devices) or swipe up from the bottom (for older iOS devices) to open the Control Center.
3. Select Screen Mirroring: Tap the "Screen Mirroring" icon.
4. Choose "ishare****": From the list of available devices, tap on "ishare****" (the name displayed on your TV screen).
5. Enter PIN (First Use): For the first-time connection, you may be prompted to enter a PIN. The default PIN is 1234, which will be displayed on your TV screen. Enter this PIN on your iOS device.
6. Start Mirroring: Your iOS device screen should now be mirrored to your TV or monitor.

Image: Step-by-step visual instructions for connecting an iPhone to the iShare adapter for screen mirroring, including turning on Wi-Fi, accessing Control Center, and selecting the iShare device.

5. Compatibility & Limitations

5.1. Device Compatibility

The iShare iOS Wireless HDMI Display Adapter is designed exclusively for iOS devices and supports a wide range of iPhones and iPads running iOS 9.0 or above. This includes devices with both Lightning and USB-C ports, such as:

• iPhone 5 and newer models (including iPhone 15/16/17 series)
• All iPad Pro models
• iPad Air
• iPad mini

Image: The iShare adapter connected to a TV, demonstrating its ability to stream content from iPhones and iPads to various display types including projectors, TVs, and monitors.

5.2. Application Compatibility

This adapter is optimized for screen mirroring free and open-platform applications. It works seamlessly with:

• YouTube
• TikTok
• Office applications
• Safari
• Chrome
• FaceTime
• And many other daily apps.

Image: A visual comparison of applications that work with the iShare adapter (e.g., YouTube, Office, Safari) and those that are not supported (e.g., Netflix, Amazon Prime, Hulu).

5.3. Important Limitations (HDCP Content)

This base model does NOT support premium streaming services with HDCP (High-bandwidth Digital Content Protection) copyright protection.

Applications that are NOT supported include, but are not limited to:

• Netflix
• Amazon Prime Video
• Hulu
• HBO Go

For seamless streaming of Netflix, Disney+, and similar services, an alternative product like the iShare Pro (B0DQ172B8C) is required.

6. Settings and Firmware Upgrade

The iShare iOS adapter offers configuration options and supports firmware upgrades to enhance functionality and compatibility. To access these settings:

1. Switch to Casting Mode: Press and hold the button on the iShare adapter for a few seconds to switch to "Casting Mode." This will display a screen with a QR code and Wi-Fi details.
2. Connect to Adapter's Wi-Fi: On your iOS device, go to Wi-Fi settings and connect to the iShare adapter's Wi-Fi network (SSID: "ishare-XXXX", password will be displayed on screen, e.g., 12345678).
3. Access Settings Page: Open a web browser on your iOS device and enter the IP address displayed on the TV screen (e.g., 192.168.49.1). This will open the configuration page.
4. Adjust Settings: On the settings page, you can adjust various parameters such as:
   • Overscan
   • Wi-Fi Frequency (2.4G / 5G)
   • HDMI Output Resolution (1080P / 720P / 480P)
   • Video Mode (Smooth / Fast)
   • iOS Support Version (Airplay / Screen Mirroring)
   • Screen Display (Full Screen / Standard)
5. Firmware Upgrade: The settings page also provides an option to upgrade the firmware. Follow the on-screen instructions to scan a QR code with your mobile camera to initiate the upgrade process.
6. Restore Factory Settings: An option to restore factory settings is also available, which will reboot the dongle.

Note: Changing certain settings (e.g., Wi-Fi frequency, HDMI Out, Video Mode, iOS Support Version, iOS Definition) will require the dongle to reboot.

7. Specifications

8. Troubleshooting

If you encounter issues while using your iShare iOS Wireless HDMI Display Adapter, consider the following:

• No Signal on TV:
  • Ensure the iShare adapter is securely plugged into the HDMI port.
  • Verify that your TV/monitor is set to the correct HDMI input source.
  • Check the power connection to the iShare adapter. Ensure it's receiving adequate power from a 5V/1A or 5V/2A source.
• Mirroring Not Starting:
  • Confirm your iOS device's Wi-Fi or cellular data is active.
  • Make sure you have selected "ishare****" from the Screen Mirroring options in your iOS Control Center.
  • If it's the first time, ensure you've entered the correct PIN (default 1234).
  • Restart both your iOS device and the iShare adapter (by unplugging and replugging power).
• Lag or Stuttering During Mirroring:
  • Ensure the iShare adapter is powered by a stable 5V/1A or 5V/2A adapter.
  • Check for Wi-Fi interference. Try to minimize other devices using the same Wi-Fi band.
  • Access the adapter's settings (Section 6) and try switching the Wi-Fi frequency to 5G if your device and network support it, or adjust the Video Mode to "Fast".
  • Reduce the distance between your iOS device and the iShare adapter.
• Cannot Mirror Netflix/Amazon Prime Video:
  • This is a known limitation. The iShare iOS Wireless HDMI Display Adapter does not support content protected by HDCP (High-bandwidth Digital Content Protection), which includes most premium streaming services. This is not a defect of the product.
  • Consider upgrading to the iShare Pro (B0DQ172B8C) for HDCP-compatible streaming.
• Incorrect Screen Size/Aspect Ratio:
  • Access the adapter's settings (Section 6) and adjust the "Overscan" or "Screen Display" options.
  • Check your TV/monitor's aspect ratio settings.

9. Warranty and Support

For warranty information, technical support, or further assistance with your lulaven iShare iOS Wireless HDMI Display Adapter, please refer to the contact details provided in the product packaging or visit the official lulaven store on Amazon.

Online Store: Visit the lulaven Store on Amazon

Please retain your proof of purchase for any warranty claims.