iGPSPORT BSC300 GPS Cycling Computer User Manual

1. Introduction

Thank you for choosing the iGPSPORT BSC300 GPS Cycling Computer. This device is designed to enhance your cycling experience by providing accurate data, navigation, and smart connectivity. This manual will guide you through the setup, operation, and maintenance of your new cycling computer to ensure optimal performance and longevity.

2. Package Contents

Please verify that all items are present in your package:

• iGPSPORT BSC300 Cycling Computer (x1)
• Standard Mount (x1)
• Mount Pad (x1)
• O-Ring Band (x1)
• User Manual (x1)
• USB Type-C Cable (x1, for charging and data transfer)

3. Device Overview

Familiarize yourself with the physical features and buttons of your iGPSPORT BSC300.

Figure 3.1: Front view of the BSC300 displaying a map and cycling data.

Figure 3.2: Back view of the BSC300 showing the mount interface and charging contacts.

Figure 3.3: Bottom view of the BSC300, highlighting the control buttons and USB-C port.

The device features a 2.4-inch full lamination color screen for clear data display. Buttons are located on the sides and bottom for easy navigation and control during your ride.

4. Setup

4.1. Charging the Device

Before first use, fully charge your BSC300. Connect the provided USB Type-C cable to the device's charging port and to a USB power adapter (not included) or a computer USB port. The average charging time is approximately 1.5 hours.

4.2. Mounting on Your Bicycle

Use the standard mount, mount pad, and O-ring bands to securely attach the BSC300 to your bicycle's handlebars or stem. Ensure the mount is firmly in place and the device clicks securely into the mount.

4.3. Initial Power On and Language Settings

Press and hold the power button (usually located on the side) to turn on the device. Follow the on-screen prompts to select your preferred language and initial settings.

4.4. Pairing with the iGPSPORT App

For full functionality, download the iGPSPORT app on your smartphone. Enable Bluetooth on your phone and the BSC300. Open the app, search for your device, and follow the pairing instructions. This allows for data synchronization, firmware updates, and smart notifications.

4.5. Sensor Pairing

The BSC300 supports ANT+ and Bluetooth sensors. To pair a sensor:

1. Navigate to the 'Sensor Pairing' menu on your BSC300.
2. Ensure your sensor (e.g., heart rate monitor, speed sensor, cadence sensor, power meter) is active and within range.
3. Select the sensor type and choose the detected sensor from the list to pair.
4. The device also supports smart trainer connections and electronic shifting systems (SHIMANO, CAMPY, SRAM).

4.6. Navigation Setup

The BSC300 features built-in map navigation. You can upload GPX/TCX route files to the device via the iGPSPORT app or by connecting the device to a computer. Refer to the app's instructions for detailed route management.

5. Operating

5.1. Starting and Stopping a Ride

Press the appropriate button (usually a 'Start' or 'Record' button) to begin recording your ride data. Press it again to pause or stop the recording. Confirm saving the ride data when prompted.

5.2. Display Customization

The BSC300 allows you to customize your data display with over 130 cycling data options. Access the display settings through the device menu or the iGPSPORT app to arrange data fields according to your preferences.

5.3. Using Navigation

Once a route is loaded, select it from the navigation menu. The device will display the route on its map, guiding you with turn-by-turn directions or a breadcrumb trail. If you deviate from the route, the device will typically provide an alert and guide you back.

5.4. Smart Notifications

When paired with your smartphone via the iGPSPORT app, the BSC300 can display smart notifications (e.g., calls, messages) directly on its screen, allowing you to stay connected without checking your phone.

6. Maintenance

6.1. Cleaning

Wipe the device with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the screen or casing.

6.2. Water Resistance

The BSC300 has an IPX7 waterproof rating, meaning it can withstand immersion in up to 1 meter of water for 30 minutes. It is suitable for use in rain but should not be submerged for extended periods or used for diving.

6.3. Battery Care

To prolong battery life, avoid exposing the device to extreme temperatures. Charge the device regularly, even if not in frequent use, to maintain battery health. The typical battery life is approximately 20 hours under normal usage conditions.

6.4. Firmware Updates

Regularly check for firmware updates via the iGPSPORT app. Updates can improve performance, add new features, and fix bugs.

7. Troubleshooting

7.1. Device Not Powering On

Ensure the device is fully charged. If the issue persists, try performing a soft reset (refer to the iGPSPORT website for specific instructions).

7.2. No GPS Signal

Ensure you are in an open area away from tall buildings or dense tree cover. Allow the device a few minutes to acquire a signal. The BSC300 supports Full GNSS (GPS+Beidou+Glonass+Galileo+QZSS) for enhanced accuracy.

7.3. Sensor Not Connecting

Check that the sensor's battery is not depleted and that it is active and within range of the BSC300. Re-attempt the pairing process. Ensure no other devices are interfering with the ANT+ or Bluetooth signal.

7.4. Data Not Syncing with App

Ensure Bluetooth is enabled on both your smartphone and the BSC300. Check your internet connection and that the iGPSPORT app is up to date. Try restarting both devices.

8. Specifications

9. Warranty and Support

For warranty information, technical support, and frequently asked questions, please visit the official iGPSPORT website or contact their customer service. Keep your purchase receipt as proof of purchase for warranty claims.

Official iGPSPORT Website: www.igpsport.com