SOUNDPEATS Mini HS Wireless Earphones User Manual

1. Introduction

Thank you for choosing the SOUNDPEATS Mini HS Wireless Earphones. This manual provides detailed instructions on how to set up, operate, and maintain your earphones to ensure optimal performance and longevity. Please read this manual thoroughly before use.

Key Features:

• Hi-Res Audio Certified: Experience music beyond imagination, even wirelessly. These are the world's first inner-ear truly wireless earphones to bear the Japan Audio Society's 'Hi-Res Wireless' logo. Covering a wide range from delicate high frequencies (up to 40kHz) to powerful low frequencies, they deliver comfortable sound across all music genres.
• LDAC Codec Support: Delivers lifelike sound. Supports the 'LDAC' codec, enabling data transmission approximately three times that of conventional technology. Achieves audio quality transmission up to 96kHz/24bit with minimal sound distortion, reproducing even subtle sounds clearly with outstanding resolution.
• Compact, Round Design: The small, round case design is highly fashionable, beautifully expressing music with a smooth touch and uplifting your mood. Equipped with a high-performance chipset that delivers low latency and a high-quality 6.1mm dynamic driver, it provides powerful bass and a refreshing, clear aftertaste without delays or interruptions.
• Ultra-Lightweight 4.5g Design per Earbud: Comfortable Fit and Excellent Portability. Adopting an inner-ear design with a light fit, mindful of Asian ears, it reduces unpleasant sealed feelings and allows for long-term wear. Enjoy natural sound without unnecessary burden on your ears.
• Up to 36 Hours Continuous Playback: The earbuds alone provide 8 hours of continuous playback, extending to 36 hours with the charging case. This saves the hassle of frequent charging and is convenient for long commutes.
• Bluetooth 5.3 & Multipoint Connection: Ensures stable connectivity and allows simultaneous connection to two devices.

2. Package Contents

• SOUNDPEATS Mini HS Wireless Earbuds
• Charging Case
• USB Type-C Charging Cable
• Eartips (S/M/L sizes)
• User Manual

3. Product Diagram

Familiarize yourself with the components of your SOUNDPEATS Mini HS earphones.

Image: SOUNDPEATS Mini HS Earbuds inside their charging case.

• Earbuds: Left (L) and Right (R) earbuds.
• Touch Control Area: Located on the outer surface of each earbud for various functions.
• Microphone: Integrated into each earbud for calls and voice commands.
• Charging Contacts: On the bottom of each earbud and inside the charging case.
• Charging Case: Stores and charges the earbuds.
• USB Type-C Charging Port: Located on the charging case for external power.
• Indicator Light: On the charging case to show battery status and charging.

4. Setup

4.1 First Use

1. Open the charging case and remove both earbuds.
2. Remove the insulating film from the charging contacts (if present).
3. Place the earbuds back into the charging case and close the lid to activate them. Ensure the case has sufficient power.

4.2 Pairing

1. Open the charging case. The earbuds will automatically enter pairing mode, and the indicator light on the case will flash.
2. On your Bluetooth-enabled device (smartphone, tablet, etc.), go to Bluetooth settings and select "SOUNDPEATS Mini HS" from the list of available devices.
3. Once connected, a voice prompt will confirm successful pairing.

4.3 Multipoint Connection

The Mini HS supports connecting to two devices simultaneously.

1. Connect the earbuds to your first device as described in section 4.2.
2. Disable Bluetooth on the first device. The earbuds will re-enter pairing mode.
3. Connect the earbuds to your second device.
4. Enable Bluetooth on the first device. The earbuds should automatically reconnect to both devices.

Note: LDAC codec is not available when using multipoint connection. Please enable multipoint connection feature via the SOUNDPEATS app.

Image: Earbuds connected to both a laptop and a smartphone, illustrating multipoint connection.

5. Operating Instructions

5.1 Touch Controls

The SOUNDPEATS Mini HS earphones feature intuitive touch controls:

5.2 Power On/Off

• Power On: Open the charging case, and the earbuds will power on automatically. Alternatively, press and hold the touch area on both earbuds for 1.5 seconds.
• Power Off: Place the earbuds back into the charging case and close the lid. They will power off automatically. Alternatively, press and hold the touch area on both earbuds for 10 seconds.

6. Charging

Ensure your earbuds and charging case are adequately charged for uninterrupted use.

6.1 Charging the Earbuds

Place the earbuds into the charging case. The indicator lights on the earbuds will show their charging status. They will automatically stop charging once fully charged.

6.2 Charging the Case

Connect the provided USB Type-C charging cable to the charging port on the case and to a power source (e.g., USB wall adapter, computer USB port). The indicator light on the case will show the charging progress. A full charge typically takes about 2 hours.

Image: Illustration of SOUNDPEATS Mini HS battery life, showing 8 hours for earbuds alone and 36 hours with the charging case.

Note: Actual playback time may vary depending on volume level, audio content, and environmental factors.

7. Maintenance

Proper maintenance ensures the longevity and performance of your earphones.

• Regularly clean the earbuds and charging contacts with a dry, soft cloth to prevent dust and debris buildup.
• Avoid exposing the earphones to extreme temperatures (hot or cold) or high humidity.
• Do not immerse the earphones or charging case in water.
• Store the earphones in their charging case when not in use to protect them and keep them charged.
• Avoid dropping or subjecting the earphones to strong impacts.

8. Troubleshooting

If you encounter any issues, please refer to the following common solutions:

8.1 Earbuds Not Connecting/Pairing

• Ensure both earbuds are charged.
• Turn off Bluetooth on your device, then turn it back on.
• Delete "SOUNDPEATS Mini HS" from your device's Bluetooth list and try pairing again.
• Perform a factory reset: Place both earbuds in the charging case. With the lid open, press and hold the charging case button for 10 seconds until the indicator light flashes red and white twice. Close the lid, then open it again to re-pair.

8.2 Only One Earbud Working

• Ensure both earbuds are charged.
• Place both earbuds back into the charging case, close the lid, wait a few seconds, then open the lid and take them out again.
• Try performing a factory reset as described above.

8.3 Poor Sound Quality

• Ensure the eartips provide a good seal in your ear canal. Try different sizes if necessary.
• Clean any debris from the earbud nozzles.
• Move closer to your connected device to avoid interference.

8.4 Charging Issues

• Check that the USB Type-C cable and power adapter are working correctly.
• Clean the charging contacts on both the earbuds and the charging case.

9. Specifications

Image: Diagram showing the internal Bluetooth 5.3 chip within the earbud.

10. Warranty and Support

SOUNDPEATS provides comprehensive support for its products.

10.1 Warranty Information

• Manufacturer Warranty: Your SOUNDPEATS Mini HS earphones come with a 12-month manufacturer warranty from the date of purchase.
• Return/Refund Guarantee: A 30-day return and refund guarantee is provided for your peace of mind.

Image: Visual representation of the 30-day return/refund guarantee and 12-month manufacturer warranty.

10.2 Customer Support

For any inquiries or support needs, please contact us through the following method:

• Navigate to "Account Service" > "Order History" > Select your order > "Seller" > "Ask a Question".

Note: If the delivered product is defective, shipping and handling fees will be covered by us for returns or exchanges. For returns due to customer convenience, the customer will be responsible for the shipping costs. Thank you for your understanding.