Introduction
Thank you for choosing the BOMGE Boom Arm Mic Stand, model MS808. This adjustable, heavy-duty suspension boom arm is designed to provide stable and flexible microphone positioning for various applications, including podcasts, streaming, gaming, home office use, and professional recording. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your product.
The MS808 features internal springs and integrated cable management channels for a clean and professional setup. Its robust construction supports microphones up to 3.5 lbs (1.5 kg) and offers extensive adjustability for precise microphone placement.
The BOMGE Boom Arm Mic Stand provides stable microphone positioning for various applications.
Package Contents
Please verify that all the following components are included in your package:
- Boom Arm Stand
- Desk Clamp
- 3/8" to 1/4" Screw Adapter
- 3/8" to 5/8" Screw Adapter
All components included in the BOMGE Boom Arm Mic Stand package.
Setup Instructions
Follow these steps to properly set up your BOMGE Boom Arm Mic Stand:
- Attach the Desk Clamp: Place the desk clamp onto the edge of your desk. Ensure the silicone cushion is positioned to protect your desktop. Tighten the screw until the clamp is securely fastened to the desk. The clamp can accommodate desk thicknesses up to 2.5 inches (6.35 cm).
- Insert the Boom Arm: Insert the base of the boom arm into the hole on the desk clamp. The arm should rotate freely within the clamp.
- Attach Your Microphone: Screw your microphone or shock mount onto the 5/8" threaded connector at the end of the boom arm. If your microphone requires a different thread size, use the appropriate 3/8" to 1/4" or 3/8" to 5/8" screw adapter provided.
- Route Cables: Utilize the integrated cable management channels along the boom arm to route your microphone cable. Gently pry open the channel covers, place the cable inside, and snap the covers back into place. This keeps your setup tidy and prevents cable interference.
Visual guide for installing the boom arm mic stand.
Detail of the high-quality desk clamp, designed for stability and desktop protection.
Operating Instructions
The BOMGE Boom Arm Mic Stand offers extensive flexibility for precise microphone positioning:
- Adjusting Arm Position: The arm features multiple joints that allow for 360° rotation at the base and various angles at the arm segments. Gently move the arm to your desired position. The internal spring system will hold the arm in place.
- Vertical and Horizontal Reach: The stand provides a maximum vertical reach of 31.5 inches (80 cm) and a horizontal reach of up to 37 inches (94.4 cm), allowing it to extend over most monitors and accommodate various setups.
- Microphone Angle: The microphone connector at the end of the arm allows for rotation and tilting to fine-tune your microphone's angle for optimal sound capture.
Adjustability of the boom arm, including vertical height and joint rotation.
Detailed dimensions and articulation points for flexible positioning.
Maintenance
To ensure the longevity and proper functioning of your boom arm mic stand, follow these maintenance guidelines:
- Cleaning: Wipe down the stand regularly with a soft, dry cloth to remove dust and debris. For stubborn marks, use a slightly damp cloth and mild soap, then dry thoroughly. Avoid abrasive cleaners or solvents.
- Check Connections: Periodically check that the desk clamp is securely tightened and that your microphone is firmly attached to the arm.
- Cable Management: Ensure cables are properly routed within the channels to prevent pinching or damage.
- Joint Inspection: Inspect the arm joints for any signs of wear or looseness. The internal springs are designed for durability, but consistent heavy loads or improper handling can affect performance over time.
Troubleshooting
If you encounter any issues with your BOMGE Boom Arm Mic Stand, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Arm is unstable or sags | Desk clamp not tight enough; Microphone too heavy; Internal springs weakened. | Ensure desk clamp is fully tightened. Verify microphone weight is within 3.5 lbs (1.5 kg) limit. If issues persist, contact customer support. |
| Microphone connection is loose | Microphone not fully screwed in; Incorrect adapter used. | Ensure microphone or shock mount is securely screwed onto the 5/8" thread. Use the correct thread adapter if necessary. |
| Cables are exposed or tangled | Cable management channels not utilized. | Route cables through the integrated cable management channels for a clean setup. |
| Arm does not rotate smoothly | Dust or debris in joints; Over-tightened pivot points. | Clean joints with a soft cloth. Ensure no external obstructions. The arm is designed to rotate freely at the base. |
Specifications
Key technical specifications for the BOMGE Boom Arm Mic Stand MS808:
- Model: MS808
- Color: White
- Material: Acrylonitrile Butadiene Styrene (ABS)
- Item Weight: 1.5 Kilograms (3.3 lbs)
- Maximum Weight Recommendation: 1.5 Kilograms (3.5 lbs)
- Item Dimensions (L x W x H): 17.72 x 3.94 x 2.36 inches (45 x 10 x 6 cm)
- Maximum Height: 800 Millimeters (31.5 inches)
- Base Type: Clamp (supports desks up to 2.5 inches / 6.35 cm thick)
- Microphone Stand Thread Size: 5/8 inch (with 3/8" adapters included)
- UPC: 768443209045
Dimensions and load capacity of the boom arm.
The boom arm is compatible with a wide range of microphones and accessories.
Warranty Information
The BOMGE Boom Arm Mic Stand MS808 comes with a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Customer Support
If you have any questions, require technical assistance, or need to make a warranty claim, please contact BOMGE customer support through the retailer's platform or the official BOMGE website. Our support team is available to assist you with any product-related inquiries.