1. Product Overview
The INSPIRE WAIKI Dimmable Solar LED Outdoor Floor Lamp is designed to provide versatile and efficient lighting for your outdoor spaces. Featuring solar charging capabilities and dimmable LED lights, this lamp offers four distinct light levels to suit various ambient needs. It includes two BOOSTER batteries for extended illumination and an infrared remote control for convenient operation. Its robust IP44 rating ensures resistance to outdoor elements.
Image: The INSPIRE WAIKI lamp providing illumination in an outdoor patio environment.
2. Important Safety Instructions
Please read all safety instructions carefully before installation and use. Keep this manual for future reference.
- Ensure the lamp is installed on a stable, level surface to prevent tipping.
- Do not attempt to modify or disassemble the lamp beyond the specified repairable components (battery and LED module).
- Keep the solar panel clean and free from obstructions to ensure optimal charging efficiency.
- This product is designed for outdoor use with an IP44 rating. Avoid submerging it in water.
- Use only the specified BOOSTER batteries and CR2032 battery for the remote control.
- Dispose of batteries responsibly according to local regulations.
- Keep the remote control away from water and extreme temperatures.
3. Package Contents
Verify that all components listed below are present in your package:
Image: Diagram showing all components included in the package.
- INSPIRE WAIKI Floor Lamp (Main Body)
- 2 x BOOSTER Batteries (Li-ion 3000mAh - 3.7V)
- Infrared Remote Control
- 1 x CR2032 Battery (for Remote Control)
- Mounting Hardware (screws and wall plugs)
- USB-C Charging Cable (for BOOSTER batteries)
- User Manual
4. Setup and Installation
4.1 Site Selection
Choose an outdoor location that receives direct sunlight for most of the day to ensure optimal solar charging. The lamp is designed for floor mounting.
4.2 Assembly
- Carefully unpack all components from the box.
- Assemble the lamp body sections if they are separate, ensuring they are securely connected.
- Position the lamp at your desired location. Use the provided mounting hardware to secure the base to the ground if necessary for stability.
Image: Dimensions and assembly overview of the lamp.
4.3 Booster Battery Installation
- Locate the battery compartments on the lamp.
- Insert the two BOOSTER batteries into their respective slots. Ensure correct polarity.
- Close the battery compartment covers securely.
Image: Proper insertion of a BOOSTER battery into the lamp.
4.4 Remote Control Battery Installation
- Open the battery compartment on the back of the remote control.
- Insert the CR2032 battery with the positive (+) side facing up.
- Close the compartment cover securely.
5. Operating the Lamp
5.1 Power On/Off
The lamp can be turned on or off using the power button on the lamp itself or via the infrared remote control. The remote control has a range of up to 10 meters.
Image: Using the remote control to operate the lamp.
5.2 Adjusting Brightness
The lamp offers four dimmable light levels: 100, 300, 600, and 900 lumens. Use the brightness control buttons on the remote control to cycle through these levels.
Image: Overview of light levels and approximate battery durations.
5.3 Charging BOOSTER Batteries
The BOOSTER batteries can be charged in two ways:
- Solar Charging: When installed in the lamp, the batteries will automatically charge via the integrated solar panel during daylight hours. Ensure the solar panel is exposed to direct sunlight for optimal charging.
- USB-C Charging: For faster charging or during periods of low sunlight, the BOOSTER batteries can be removed and charged individually using a standard USB-C cable (included) and a compatible USB power adapter (not included). A small LED indicator on the booster battery will show the charging status.
6. Maintenance
6.1 Cleaning
Wipe the lamp's surface and solar panel regularly with a soft, damp cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
6.2 Battery Replacement
The BOOSTER batteries (Li-ion 3000mAh - 3.7V) and the CR2032 battery for the remote control are replaceable. Refer to section 4.3 and 4.4 for installation instructions when replacing batteries. Use only genuine INSPIRE replacement parts or equivalent specifications.
6.3 LED Module Replacement
In the event of an LED module malfunction, it can be replaced to extend the product's lifespan and reduce environmental impact. Contact customer support for guidance on obtaining and installing a replacement LED module.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Insufficient solar charge; BOOSTER batteries not installed correctly; Remote control battery depleted. | Ensure solar panel is clean and exposed to direct sunlight. Charge BOOSTER batteries via USB-C. Check BOOSTER battery installation. Replace CR2032 battery in remote. |
| Lamp light is dim or flickers. | Low battery charge; Dirty solar panel. | Allow more time for solar charging or charge via USB-C. Clean the solar panel. |
| Remote control not working. | Remote battery depleted; Obstruction between remote and lamp; Remote out of range. | Replace CR2032 battery. Ensure clear line of sight. Operate within 10m range. |
| Lamp does not stay on for long. | Insufficient charge; High brightness setting; Degraded batteries. | Ensure full charge. Use a lower brightness setting. Consider replacing BOOSTER batteries if they no longer hold a charge. |
8. Technical Specifications
| Brand | Inspire |
| Model Number | 3276007464566 |
| Dimensions (H x W x D) | 200.6 cm x 42.4 cm x 18 cm |
| Weight | 4.86 Kilograms |
| Material | Metal |
| Finish | Mat |
| Light Source | Integrated LED |
| Color Temperature | 4000 K |
| Luminous Flux (Dimmable) | 100, 300, 600, 900 Lumens |
| Power Source | Solar-powered (with USB-C charging for BOOSTER batteries) |
| Voltage | 5 VDC |
| Ingress Protection (IP) Rating | IP44 (Splash-proof) |
| Control Method | Infrared Remote Control, On/Off Switch |
| Booster Batteries | 2 x Li-ion 3000mAh - 3.7V (included) |
| Remote Control Battery | 1 x CR2032 (included) |
| Installation Type | Floor Mounting |
9. Warranty and Support
This INSPIRE product is manufactured to high-quality standards and is backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official INSPIRE website.
For technical support, replacement parts (such as BOOSTER batteries or LED modules), or any inquiries regarding your INSPIRE WAIKI lamp, please contact your retailer or the manufacturer's customer service department. Contact information can typically be found on the product packaging or the brand's official website.
Note: Keep your proof of purchase for warranty claims.
