Introduction
Thank you for choosing the VRURC Portable Charger. This 20000mAh power bank is designed for convenience and efficiency, featuring built-in cables and fast charging capabilities to keep your devices powered on the go. Please read this manual carefully to ensure proper use and maintenance of your device.
Product Overview
Package Contents:
- 1x VRURC 20000mAh Portable Charger
- 1x User Manual
Key Features:
- Universal Compatibility: Built-in 4 cables (18W for iPhone, 18W Type-C, 12W Micro, 10W USB-A) and additional USB-C + USB-A output ports. Compatible with a wide range of devices including iPhone 16/15/14/13/12/11/8/X/XR series, Samsung Galaxy S24/S23/S22/S21/S10/S9/S8/Galaxy A51/52/53/54/55/Note 20/10, Google Pixel series, AirPods, smartwatches, and more.
- High-Speed Charging: USB-A output port supports up to 22.5W fast charging, capable of charging an iPhone to 50% in 30 minutes. Built-in USB-C and iPhone cables support 18W fast charging.
- Simultaneous Charging: Total of 4 output ports (3 built-in cables, USB-A, and USB-C port) allow charging up to 4 smart devices concurrently.
- Dual Recharging Options: Conveniently recharge the power bank via the built-in USB-A cable (approx. 11 hours with 5V/2A adapter) or the 18W USB-C input port (approx. 6 hours with 9V/2A power adapter).
- Safety & Design: Features an anti-slip and anti-scratch design, portable lanyard, and smart chip protection against short-circuit, over-current, over-voltage, and over-heat. Includes a digital LED display for battery level.
Figure 1: VRURC Portable Charger (Purple) with built-in cables and digital display.
Setup
Initial Charging of the Power Bank:
Before first use, it is recommended to fully charge your VRURC Portable Charger. There are two methods for recharging:
- Via Built-in USB-A Cable: Extend the built-in USB-A cable and connect it to a compatible USB-A power adapter (5V/2A recommended). Full charge takes approximately 11 hours.
- Via USB-C Input Port: Connect a USB-C cable (not included) to the power bank's USB-C input port and a compatible 18W (9V/2A) power adapter. Full charge takes approximately 6 hours.
Figure 2: The power bank can be recharged using its built-in USB-A cable or a USB-C input.
Video 1: Official VRURC demonstration of the portable charger's features, including its built-in cables and charging capabilities.
Operating Instructions
Charging Your Devices:
The VRURC Portable Charger offers multiple ways to charge your electronic devices:
- Using Built-in Cables:
Extend the appropriate built-in cable (Lightning for iPhone, Type-C, or Micro USB) and plug it directly into your device's charging port. The power bank will automatically begin charging. - Using USB-A Output Port:
Connect your device's USB-A charging cable to the USB-A output port on the power bank. - Using USB-C Output Port:
Connect your device's USB-C charging cable to the USB-C output port on the power bank.
You can charge up to 4 devices simultaneously using a combination of the built-in cables and external ports.
Figure 3: Fast charging an iPhone using the built-in USB-C cable.
Figure 4: Detailed view of the smart fast charging cables integrated into the power bank.
Figure 5: The power bank can charge up to four devices at maximum speed.
Video 2: Official VRURC video showcasing the 20000mAh portable charger with its convenient built-in cables.
LED Display:
The integrated LED display shows the remaining battery percentage of the power bank, allowing you to easily monitor its charge level.
Figure 6: The LED display provides an easy way to check the remaining battery level.
Maintenance
- Keep the power bank away from extreme temperatures, direct sunlight, and liquids.
- Avoid dropping or subjecting the device to strong impacts.
- Clean the surface with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Store in a cool, dry place when not in use for extended periods.
- The portable lanyard can also be used to secure the device to a bag or wrist, preventing accidental drops.
Figure 7: The unique lanyard design serves as both a carrying strap and a charging cable.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Power bank not charging | Charging cable or adapter faulty; Power bank fully charged; Input port issue. | Try a different cable/adapter. Check LED display for 100%. Ensure cable is fully inserted. |
| Device not charging from power bank | Power bank low/empty; Cable faulty; Device incompatible; Loose connection. | Recharge power bank. Try a different cable. Ensure device is compatible. Check connections. |
| Slow charging | Using non-fast charging port/cable; Multiple devices charging simultaneously; Device's charging limit. | Use 22.5W/18W ports/cables. Charge fewer devices. Check device's charging specifications. |
| LED display not working | Device malfunction. | Contact VRURC customer service for assistance. |
Specifications
- Model Number: T2047Q
- Battery Capacity: 20000 Milliamp Hours (mAh)
- Product Dimensions: 6.14 x 2.75 x 1.08 inches
- Item Weight: 15.2 ounces
- Input Ports: USB-A (built-in cable), USB-C Port (18W)
- Output Ports: Lightning Cable (built-in, 18W), USB-C Cable (built-in, 18W), Micro Cable (built-in, 12W), USB-A Cable (built-in, 10W), USB-A Port (22.5W), USB-C Port
- Special Features: Digital Display, Auto Shut-Off, Fast Charging, Built-In Cables, Scratch Resistant
- Battery Type: Lithium Polymer (1 required, included)
- Manufacturer: Dong guan Utopia-Originality Technology Co., Ltd
- Country of Origin: China
Warranty and Support
VRURC offers replacement and sales service for this product. For any issues or inquiries regarding your portable charger, please refer to the contact information provided with your purchase or visit the official VRURC website for support.
