1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Roinvou 10.1 Inch Android Car Stereo. Please read this manual thoroughly before using the product to ensure proper functionality and safety. Keep this manual for future reference.
2. Safety Information
- Professional Installation Recommended: Installation of car electronics can be complex. It is highly recommended to have the unit installed by a qualified professional to avoid damage to the product or your vehicle.
- Power Supply: Ensure the unit is connected to a 12V DC power supply with a negative ground. Incorrect voltage can cause damage.
- Wiring: Carefully follow all wiring diagrams. Incorrect wiring can lead to malfunctions, electrical shorts, or fire.
- Driving Safety: Do not operate the unit in a way that distracts you from driving. Always prioritize road safety.
- Temperature: Avoid exposing the unit to extreme temperatures or direct sunlight for prolonged periods.
3. Package Contents
Verify that all items listed below are included in your package:
- Roinvou Car Stereo for Ford Fusion Mondeo Mustang
- Power Cable
- CANBUS Box
- Radio Antenna Cable
- Dual RCA Harness
- GPS Antenna
- Rear Camera Input Cable
- Dual USB Cable
- AHD Backup Camera
- External Microphone
- Installation Tool
Figure 3.1: Included components in the Roinvou car stereo package.
4. Installation Guide
This section provides a general overview of the installation process. Specific vehicle wiring may vary. Consult a professional installer if you are unsure.
4.1 Pre-Installation Check
- Disconnect the vehicle's battery before starting any electrical work.
- Ensure the car stereo is compatible with your vehicle model (Ford Fusion, Mondeo, Mustang 2009-2012).
- Verify all package contents are present.
4.2 Removing the Factory Radio
Carefully remove the existing factory radio and trim panels. Refer to your vehicle's service manual for specific instructions on panel removal.
Figure 4.1: Comparison of the dashboard before and after installing the Roinvou car stereo.
4.3 Wiring Connections
Connect the provided power cable, CANBUS box, radio antenna, GPS antenna, and USB cables to the corresponding ports on the car stereo and your vehicle's wiring harness. Ensure all connections are secure.
4.3.1 Backup Camera Wiring
Connect the AHD backup camera using the provided rear camera input cable. The reverse input cable must be plugged in, even if the reverse camera is not being used, to ensure proper Bluetooth and Wi-Fi signal reception.
Figure 4.2: Detailed wiring diagram for the reversing camera and CANBUS system.
4.4 Mounting the Unit
Once all wiring is complete, carefully mount the Roinvou car stereo into the dashboard opening. Secure it using the appropriate mounting brackets and screws. Reinstall all trim panels.
5. Operating Instructions
This section details the various functions and features of your Roinvou Android Car Stereo.
5.1 Power On/Off
Press and hold the power button (usually located on the front panel or a soft button on the screen) to turn the unit on or off. A short press typically mutes or unmutes the audio.
5.2 User Interface (UI) and Themes
The unit features a customizable Android interface with 28 desktop themes. Navigate through the themes in the settings menu to personalize your display.
Figure 5.1: Selection of 28 desktop themes for interface customization.
5.3 Wireless Carplay and Android Auto
Connect your iPhone or Android smartphone wirelessly or via USB for seamless integration of navigation, music, calls, and messaging directly on the car stereo screen.
Figure 5.2: Wireless Apple CarPlay and Android Auto interface.
Video 5.1: Demonstration of UI functions, Carplay, and Android Auto connection.
5.4 GPS Navigation and Wi-Fi
The unit includes a built-in GPS module for navigation. You can use pre-installed offline maps or download online navigation apps like Waze via Wi-Fi. Connect to a Wi-Fi hotspot to access online maps and download other applications from the Play Store.
Figure 5.3: GPS navigation interface and Wi-Fi connection capabilities.
5.5 Bluetooth and FM/RDS Radio
Utilize Bluetooth for hands-free calling, music streaming, and syncing contacts. The FM/RDS radio provides stable reception with 18 preset stations, offering real-time road conditions and weather forecasts.
5.6 Mirror Link
Connect your Android or iOS phone via Wi-Fi hotspot or USB cable to mirror your phone's screen onto the car stereo. Android devices support bidirectional control, while iPhones support unidirectional control.
Figure 5.4: Mirror Link functionality for displaying smartphone content on the car stereo.
5.7 Steering Wheel Control (SWC)
The unit supports steering wheel controls for convenient operation. If your vehicle has a CANBUS decoder, connect it before powering on the machine, then navigate to Apps > Settings > Factory Setup (password 1234) > CAN Settings to configure SWC. Select the brand and model year. If no CANBUS decoder is used, connect the steering wheel control wires (Key1/Key2) to the power cable and use the 'SteeringWheelKey' app to learn functions.
Figure 5.5: Interface for configuring steering wheel controls.
5.8 Digital Sound Processor (DSP)
The integrated DSP allows for advanced audio customization. Access the audio settings to adjust equalizer presets (e.g., Pop, Rock, Jazz, Classical) or create custom sound profiles. You can also adjust the sound field to optimize audio delivery within the vehicle cabin.
5.9 AHD Backup Camera Display
When a compatible AHD backup camera is connected, the car stereo will automatically display the reversing image when the vehicle is shifted into reverse gear, enhancing parking safety.
6. Specifications
| Feature | Description |
|---|---|
| Brand | Roinvou |
| Screen Size | 10.1 Inches |
| Resolution | 1024 x 600 |
| Operating System | Android |
| Memory Storage Capacity | 64 GB |
| Connectivity Technology | Bluetooth, USB, Wi-Fi |
| Special Features | CarPlay, Android Auto, Bluetooth, Touchscreen, FM RDS Radio, Mirror Link, GPS Navigation, DSP, Wi-Fi, SWC, 28 Desktop Themes |
| Compatible Devices | iPhone, Android |
| Mounting Type | Dashboard Mount |
Figure 6.1: Internal architecture highlighting 2GB RAM and 64GB storage.
7. Troubleshooting
If you encounter issues with your Roinvou car stereo, refer to the following common troubleshooting steps:
- No Power: Check all power connections and fuses. Ensure the vehicle's battery is charged.
- No Sound: Verify speaker connections. Check volume levels and audio settings (DSP). Ensure the unit is not muted.
- Bluetooth/Wi-Fi Connectivity Issues: Ensure the reverse input cable is connected. Restart the unit and your mobile device. Check for interference.
- GPS Signal Loss: Ensure the GPS antenna is properly installed and has a clear view of the sky.
- Steering Wheel Controls Not Working: Recheck CANBUS connections or re-learn the controls using the 'SteeringWheelKey' app as described in Section 5.7.
- Unit Freezes/Unresponsive: Perform a soft reset by pressing the reset button (if available) or disconnecting the power for a few minutes.
For persistent issues, please contact Roinvou customer support.
8. Warranty and Support
8.1 Warranty Information
This Roinvou product comes with a 1 Year Warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
8.2 Customer Support
If you have any questions, require technical assistance, or need to claim warranty service, please contact Roinvou customer support. You can typically find contact information on the product packaging, the seller's store page, or by searching for Roinvou customer service online.
For Amazon purchases, you can often contact the seller directly through your order history or by visiting the Roinvou store page on Amazon and using the 'Ask a question' feature.