Hzuaneri End Table with Charging Station

1. Introduction

Thank you for choosing the Hzuaneri End Table with Charging Station. This 3-tier side table is designed to provide convenient storage and charging capabilities for your living space or bedroom. It features a durable construction and integrated power outlets to keep your devices charged and organized.

Image 1.1: Overview of the Hzuaneri End Table with Charging Station.

2. Important Safety Information

• Always assemble the end table according to the provided instructions.
• Do not overload the table. The maximum static load for the top surface is 70 pounds (31.7 kg), and for middle/bottom shelves is 45 pounds (20.4 kg).
• Ensure the power cord is not pinched or damaged during assembly or use.
• Use the adjustable feet pads to ensure stability on uneven surfaces and to protect your floors from scratches.
• Keep liquids away from the charging station to prevent electrical hazards.
• Do not attempt to modify or repair the electrical components yourself. Contact qualified personnel for service.

3. Package Contents

Before assembly, please verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

• 1 x End Table (disassembled components)
• 1 x Accessory Bag (containing screws, tools, etc.)
• 1 x Instruction Manual

Image 3.1: Product dimensions and component layout.

4. Assembly Instructions

Assembly typically takes approximately 20 minutes. A Phillips screwdriver is recommended for securing the charging station. Each component is labeled with a serial number for easy identification.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Attach Frame: Connect the metal frame pieces according to the diagrams in the included instruction manual. Ensure all screws are finger-tightened initially.
3. Install Shelves: Secure the particle board shelves to the metal frame. Pay attention to the orientation of the holes for the charging station.
4. Mount Charging Station: Insert the charging station into its designated slot on the top shelf. Secure it with the provided small screws using a Phillips screwdriver.
5. Tighten All Screws: Once all components are in place, fully tighten all screws to ensure stability.
6. Adjust Feet: Screw the adjustable feet pads into the bottom of the table legs. Adjust them as needed to level the table on uneven floors.

Image 4.1: Adjustable feet pads for stability.

5. Operating the Charging Station

The end table is equipped with a convenient charging station featuring 1 AC outlet and 2 USB ports, connected via a 4.6-foot power cord.

• Power Connection: Plug the table's power cord into a standard 125V/12A wall outlet.
• AC Outlet Usage: Use the 125V/12A AC outlet to power devices such as lamps, laptops, or other small appliances.
• USB Port Usage: The two 5V/2.1A USB ports are suitable for charging smartphones, tablets, e-readers, and other USB-powered devices.
• Simultaneous Charging: You can charge multiple devices simultaneously using both the AC outlet and USB ports.

Image 5.1: Detail of the integrated charging station.

Image 5.2: Example of a smartphone charging on the table.

6. Maintenance and Care

To ensure the longevity and appearance of your Hzuaneri End Table, follow these care guidelines:

• Cleaning: Wipe the surfaces with a dry, soft cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
• Spills: Immediately wipe up any spills to prevent moisture damage to the particle board.
• Heat Protection: Use coasters under hot beverages or items to protect the table surface.
• Electrical Care: Periodically check the power cord for any signs of wear or damage. Ensure the charging ports are free of dust and debris.

7. Troubleshooting

If you encounter any issues with your end table, refer to the following common solutions:

• Table is Wobbly: Check that all screws are securely tightened. Adjust the leveling feet on the bottom of the legs to stabilize the table on uneven surfaces.
• Charging Station Not Working:
  • Ensure the power cord is fully plugged into a functional wall outlet.
  • Verify that the wall outlet itself is receiving power (test with another device).
  • Check if the device you are trying to charge is properly connected to the AC outlet or USB port.
  • Avoid overloading the charging station with too many high-power devices simultaneously.
• Scratches on Floor: Ensure the adjustable feet pads are properly installed and adjusted. Avoid dragging the table across the floor.

8. Product Specifications

9. Customer Support

For any questions, missing parts, or assistance with assembly or operation, please contact Hzuaneri customer support. Refer to your purchase documentation for specific contact details or visit the official Hzuaneri store on Amazon.

Online Store: Hzuaneri Store on Amazon