SYNCWIRE SW-XC812 90W USB-C Car Charger Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe and efficient use of your SYNCWIRE SW-XC812 90W USB-C Car Charger. This compact, all-metal car charger is designed for fast charging a wide range of devices, including smartphones and tablets, via its PD 45W and QC 45W dual ports. Please read this manual thoroughly before use and retain it for future reference.

2. Product Features

• Dual Fast Charging Ports: Equipped with one PD 3.0 (45W) USB-C port and one QC 3.0 (45W) USB-A port for rapid charging.
• High Power Output: Delivers up to 90W total power (45W per port when used individually). Note: Simultaneous super-fast charging of two devices is not supported; speeds may be reduced when both ports are in use.
• Compact & All-Metal Design: Features a super mini, thumb-sized form factor that blends seamlessly with most car interiors. Constructed from durable metal for efficient heat dissipation.
• Unique Pull Ring: Designed with a pop-up pull ring for easy insertion and removal from the car's cigarette lighter socket.
• Universal Compatibility: Supports various fast charging protocols including iPhone PD 3.0, Android QC 3.0, Samsung AFC, and SCP Super Fast Charging. Compatible with a wide range of devices such as iPhone 15/14/13/12/11 series, Samsung Galaxy S23/S22/S21 series, Google Pixel phones, iPads, and more.
• Advanced Safety Features: Built-in smart chip provides multi-protection against overcurrent, short-circuit, overvoltage, under-voltage, over-temperature, and overpower.
• LED Indicator: Soft blue LED light helps locate USB sockets in the dark.

3. Setup and Installation

3.1 Package Contents

• 1 x SYNCWIRE SW-XC812 Ultra Mini Metal Car Charger

3.2 Installation in Vehicle

1. Locate the 12V-24V cigarette lighter socket in your vehicle.
2. Insert the SYNCWIRE SW-XC812 car charger firmly into the socket until it is securely seated. The soft blue LED indicator will illuminate, confirming power connection.
3. To remove the charger, gently pull the integrated pop-up pull ring.

4. Operating Instructions

4.1 Charging Your Devices

1. Once the charger is installed and the LED is illuminated, connect your device's charging cable to the appropriate port on the car charger.
2. Use the USB-C (PD 45W) port for devices compatible with Power Delivery for optimal fast charging speeds.
3. Use the USB-A (QC 45W) port for devices compatible with Quick Charge for optimal fast charging speeds.
4. For best performance, use high-quality charging cables that support fast charging.

Important Note: While the charger offers high wattage, the actual charging speed depends on your device's capabilities and the car's power output. Most standard car 12V sockets will provide sufficient power for fast charging one device. When two devices are connected simultaneously, the total output is shared, and individual port speeds may be reduced. For example, the PD port supports Samsung 25W super fast charging.

5. Maintenance

• Keep the charger clean and dry. Use a soft, dry cloth to wipe the surface.
• Avoid exposing the charger to extreme temperatures, direct sunlight, or corrosive materials.
• Do not attempt to disassemble or modify the charger, as this will void the warranty and may cause damage.

6. Troubleshooting

• Charger not working / LED not lighting up:
  • Ensure the car charger is fully inserted into the cigarette lighter socket.
  • Check if the vehicle's engine is running or if the accessory power is on.
  • Verify the cigarette lighter socket is functional by testing it with another device.
• Device not fast charging:
  • Confirm your device and charging cable support the fast charging protocol (PD 3.0 or QC 3.0).
  • If charging two devices simultaneously, fast charging speeds may be reduced for both. Try charging one device at a time.
  • Ensure your device's battery is not already near full capacity, as charging speed naturally slows down as the battery fills.
• Charger feels warm:
  • It is normal for the charger to become slightly warm during operation, especially during fast charging. The all-metal design aids in heat dissipation. If it becomes excessively hot, disconnect it immediately and contact support.

7. Technical Specifications

8. Warranty and Support

8.1 Warranty Information

The SYNCWIRE SW-XC812 USB-C Car Charger comes with a 3-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures reliable performance under normal use. Please retain your proof of purchase for warranty claims.

8.2 Customer Support

For any questions, technical assistance, or warranty claims, please contact SYNCWIRE customer support. You can find more information and contact details by visiting the official SYNCWIRE Store: SYNCWIRE Store on Amazon.