oneisall RFC-676+P20 Dog Grooming Kit Instruction Manual

Introduction

This manual provides comprehensive instructions for the safe and effective use, maintenance, and troubleshooting of your oneisall Dog Grooming Kit. Designed for grooming pets with heavy and thick hair, this kit includes a powerful cordless clipper and a specialized paw trimmer, both featuring low-noise operation and waterproof design for a stress-free grooming experience.

Safety Information

• Use with caution to avoid skin irritation and eye injury to your pet.
• Keep the device away from water sources when charging or in use.
• Ensure the device is fully charged before use to maintain optimal performance.
• Always use the appropriate guide comb for the desired hair length to prevent accidental cuts.
• Do not attempt to disassemble the product for maintenance beyond recommended cleaning procedures.
• Keep out of reach of children and pets when not in use.

Package Contents

Your oneisall Dog Grooming Kit includes the following items:

• oneisall Cordless Dog Clipper (Main Unit)
• oneisall Pet Paw Trimmer (Smaller Unit)
• Guide Combs (Various Sizes: 3mm, 6mm, 10mm, 13mm, 16mm, 19mm, 22mm, 25mm)
• Charging Cables (for both main clipper and paw trimmer)
• Stainless Steel Comb
• Grooming Scissors
• Cleaning Brush
• Lubricating Oil
• User Manuals

Setup

1. Charging the Clippers

Before first use, fully charge both the main dog clipper and the paw trimmer. The main clipper features an LED display indicating battery percentage, while the paw trimmer uses LED indicator lights.

• Connect the appropriate charging cable to each device and a suitable power source.
• The main clipper's LED display will show charging progress. The paw trimmer's indicator lights will illuminate.
• Once fully charged, disconnect the devices from the power source.

2. Attaching Guide Combs

Select the desired guide comb based on the hair length you wish to achieve. The kit includes various sizes for different grooming needs.

• Align the chosen guide comb with the clipper blade.
• Gently push the comb onto the blade until it clicks securely into place.
• To remove, gently lift the comb from the back and slide it off.

Operating Instructions

1. General Grooming Steps

1. Prepare Your Pet: Bathe and thoroughly dry your pet. Brush their fur to remove any tangles or mats before clipping.
2. Select Comb: Attach the appropriate guide comb to the main clipper. For very thick or matted hair, consider using grooming scissors to pre-trim longer sections.
3. Power On: Press the power button on the clipper. The main clipper has a security lock feature; long-press the power button to activate/deactivate it.
4. Clipping: Hold the clipper firmly and move it gently against the direction of hair growth. Use smooth, even strokes. Avoid pressing too hard against the skin.
5. Sensitive Areas: Use the smaller paw trimmer for delicate areas such as paws, ears, and around the face. This trimmer also comes with interchangeable heads for different precision needs.
6. Check Progress: Regularly check the hair length and adjust the comb or technique as needed.

2. Security Lock Feature

The main clipper is equipped with a security lock to prevent accidental activation, especially useful during storage or travel. To activate or deactivate the lock, long-press the power button for 3 seconds. A lock icon will appear or disappear on the LED display.

3. Low Noise Operation

Both clippers operate at a low noise level (below 55dB), designed to keep pets calm and reduce anxiety during grooming sessions.

Maintenance

1. Cleaning the Blades

The oneisall grooming kit features an IPX7 waterproof design, allowing for easy cleaning under running water. Regular cleaning is crucial for maintaining blade sharpness and hygiene.

1. Brush Off Hair: After each use, use the provided cleaning brush to remove any loose hair from the blades.
2. Rinse: Rinse the blades under running water. Ensure the entire device is dry before storage or next use.
3. Wipe Dry: Use a soft cloth to thoroughly wipe the blades and clipper body dry.
4. Oil Blades: Apply a few drops of the lubricating oil to the blades. This helps maintain sharpness and prevents rust.

2. Storage

Store the clippers and all accessories in a dry, cool place, away from direct sunlight and moisture. Ensure the security lock is activated on the main clipper before storage.

Troubleshooting

Specifications

Warranty and Support

The oneisall Dog Grooming Kit comes with a 2-Year Manufacturer Warranty. For any questions, concerns, or support needs, please contact oneisall customer service. They offer 24/7 support to assist you.

For more information or to contact support, please visit the official oneisall store or refer to the contact details provided in your product packaging.

Official Product Videos