Introduction
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your ONKRON R1-B Small TV Wall Mount. Please read all instructions carefully before beginning installation to ensure correct setup and to prevent damage or injury.
The ONKRON R1-B is designed for mounting small flat and curved screens ranging from 10 to 35 inches, with a maximum weight capacity of 44.1 lbs (20 kg). It supports VESA mounting patterns of 75x75mm and 100x100mm and features a 360-degree rotation capability for versatile viewing.
Safety Information
- Weight Capacity: Do not exceed the maximum weight capacity of 44.1 lbs (20 kg).
- Screen Size: Ensure your screen size is within the recommended range of 10-35 inches.
- Wall Type: This mount is intended for installation on solid concrete walls, brick walls, or wood stud walls. Do not install on drywall alone.
- Professional Installation: If you are unsure about the installation process, consult a qualified professional.
- Tools: Use appropriate tools and wear safety gear during installation.
- Children: Keep children away from the installation area.
Package Contents
Verify that all components are present before beginning installation. If any parts are missing or damaged, contact ONKRON customer service.
Image: Diagram showing all components included in the ONKRON R1-B package, including the wall plate, monitor plate, and various screws and anchors.
- Wall Mount Plate
- Monitor Mounting Plate
- Wall Mounting Kit (M6x50 screws, 8x40 anchors, washers)
- TV Mounting Kit (M4x16, M5x16 screws, spacers, washers)
- Elastic Protective Pads (4 pcs)
- Instruction Manual
Specifications
| Model | R1-B |
| Screen Size Compatibility | 10 - 35 inches |
| Weight Capacity | Up to 44.1 lbs (20 kg) |
| VESA Compatibility | 75x75mm, 100x100mm |
| Rotation | 360 degrees |
| Wall Distance | Approximately 1 inch (7/8") |
| Material | Alloy Steel |
Image: A TV screen mounted on a wall, illustrating the maximum load capacity of 44.1 lbs and screen size compatibility from 10 to 35 inches.
Image: A side view of the mounted TV, showing the slim profile and the minimal distance of 7/8 inch from the wall.
Setup and Installation
Follow these steps carefully for secure installation:
- Choose Location: Select a suitable wall location. Ensure there are no hidden electrical wires or plumbing in the drilling path.
- Mark Drilling Points: Hold the wall mount plate against the wall at the desired height and use a pencil to mark the two drilling points. Ensure the mount is level.
- Drill Holes: Drill two holes at the marked points. The drill bit size will depend on your wall type and the provided anchors. For wood studs, drill pilot holes. For concrete/brick, use the provided anchors.
- Attach Wall Plate: Secure the wall mount plate to the wall using the appropriate screws and anchors. Ensure it is firmly attached.
- Attach Monitor Plate to Screen: Attach the monitor mounting plate to the back of your TV or monitor using the correct VESA screws and spacers from the TV mounting kit. Ensure the elastic protective pads are placed between the mount and the screen to prevent scratches.
- Mount Screen to Wall Plate: Carefully lift the screen with the attached monitor plate and align it with the wall mount plate. Slide the monitor plate onto the wall plate using the special dovetail mechanism.
- Secure Screen: Once the screen is in place, tighten the locking screw on the monitor plate to prevent accidental dislodgement or falling when rotated.
Image: A visual representation of the easy installation process, showing the two main components of the mount and how they connect.
Operating Instructions
The ONKRON R1-B mount allows for 360-degree rotation of your screen.
- Rotation: To rotate your screen, gently grasp both sides of the display and turn it to the desired orientation (landscape or portrait). The 360-degree rotation feature allows for flexible viewing angles.
- Locking Screw: Ensure the locking screw is tightened after positioning to secure the screen in place.
Image: A TV screen mounted on a wall, demonstrating the 360-degree rotation capability, allowing for both landscape and portrait orientations.
Maintenance
Regular maintenance ensures the longevity and safe operation of your wall mount.
- Cleaning: Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Periodic Inspection: Periodically check all screws and connections to ensure they remain tight and secure. Re-tighten if necessary.
- Damage Check: Inspect the mount for any signs of wear, damage, or corrosion. If any issues are found, discontinue use and contact customer support.
Troubleshooting
- Screen is not level:
Solution: Loosen the mounting screws slightly, adjust the screen to be level, and then re-tighten all screws securely. - Screen feels unstable:
Solution: Ensure all wall mounting screws and monitor plate screws are fully tightened. Verify that the locking screw is engaged. Check that your screen's weight does not exceed the mount's capacity. - Difficulty rotating the screen:
Solution: Ensure the locking screw is not overtightened, which might restrict movement. If the issue persists, check for any obstructions. - Mount does not fit my TV/Monitor:
Solution: Verify your screen's VESA pattern (distance between mounting holes on the back of your screen) matches the mount's compatibility (75x75mm or 100x100mm). Also, confirm your screen size and weight are within the specified limits.
Warranty and Support
ONKRON products are manufactured under strict quality control standards. For warranty information or technical support, please refer to the official ONKRON website or contact their customer service directly.
For assistance, please visit the ONKRON Store on Amazon or consult the contact information provided with your purchase documentation.
