Sunco Lighting T8_HY_F

Download PDF
Contents

Sunco T8 LED Tube Light Bulbs (Model T8_HY_F) User Manual

Model: T8_HY_F | Brand: Sunco Lighting

1. Product Overview

The Sunco T8 LED Tube Light Bulbs are designed as a direct replacement for traditional fluorescent tubes. These 4-foot (48-inch) bulbs feature a Hybrid Type A+B design, allowing for installation with or without an existing fluorescent ballast. They provide 2400 lumens of 5000K Daylight illumination while consuming 20 watts of power. The bulbs are equipped with a frosted lens and are ETL certified, ensuring reliable performance and safety.

Sunco T8 LED Tube Light Bulb

Image 1.1: Sunco T8 LED Tube Light Bulb, showing the G13 base and frosted lens.

Close-up of Sunco T8 LED Tube Light Bulb specifications

Image 1.2: Close-up view of the T8 LED tube end, displaying model number, input voltage, wattage, color temperature, and lumen output.

2. Safety Information

  • WARNING: Always turn off power at the circuit breaker before inspecting, installing, or removing the fixture. Failure to do so may result in electric shock or death.
  • Do not attempt to modify the bulb or its components. Any modifications may void the warranty and create safety hazards.
  • Ensure the installation environment is dry and free from excessive moisture unless the fixture is specifically rated for damp or wet locations.
  • If you are unsure about the installation process, consult a qualified electrician.
  • Handle glass tubes with care to prevent breakage.
  • These bulbs are non-dimmable. Do not connect to dimming circuits.

3. Setup and Installation

The Sunco T8 LED Tube Light Bulbs feature a Hybrid Type A+B design, offering flexibility for installation. You can either use them with an existing compatible fluorescent ballast (Type A) or bypass the ballast and wire them directly (Type B).

3.1. Installation Types

  • Type A (Plug-and-Play with Ballast): This method utilizes your existing fluorescent ballast. Simply remove the old fluorescent tube and insert the LED tube. Ensure your ballast is compatible by checking the list below.
  • Type B (Ballast Bypass - Direct Wire): If your existing ballast is faulty or you prefer a direct wire setup for increased efficiency, you can bypass the ballast. This requires re-wiring the fixture to connect the power directly to the lamp holders. This method can be done with either single-ended or double-ended wiring.
Diagram showing Type A and Type B wiring options for T8 LED tubes

Image 3.1: Wiring diagrams illustrating Type A (with ballast), Type B single-ended, and Type B double-ended connections.

3.2. Wiring Configurations (Type B - Ballast Bypass)

  • Single-Ended Wiring: Power (Live and Neutral) is connected to one end of the LED tube. The other end is not wired.
  • Double-Ended Wiring: Power (Live and Neutral) is connected to both ends of the LED tube, with Live on one end and Neutral on the other.

Important: For Type B installations, ensure the fixture is properly re-wired to bypass the ballast. If you are not comfortable with electrical wiring, please consult a qualified electrician.

Diagram illustrating single-ended and double-ended wiring for T8 LED tubes

Image 3.2: Visual representation of single-ended and double-ended wiring for direct wire installations.

Technician installing a T8 LED tube light

Image 3.3: A technician installing a T8 LED tube into a fixture.

3.3. Compatible Ballast List (for Type A Installation)

Before installing the LED tubes in Type A (plug-and-play) mode, verify that your existing fluorescent ballast is compatible with the Sunco T8 LED tubes. Refer to the list below for common compatible ballast brands and models. If your ballast is not listed, it is recommended to perform a Type B (ballast bypass) installation or consult Sunco Lighting support.

Table of compatible ballast brands and models for Sunco T8 LED tubes

Image 3.4: A comprehensive list of compatible ballast brands and models for Type A installation.

4. Operating Instructions

Once installed, operating the Sunco T8 LED Tube Light Bulbs is straightforward.

  • Ensure the power supply to the fixture is turned on at the wall switch or circuit breaker.
  • The LED tubes will illuminate instantly, providing full brightness.
  • These bulbs are designed for consistent, full brightness and are not dimmable. Do not attempt to use them with dimmer switches.
Office space illuminated by T8 LED tube lights, demonstrating wide beam angle

Image 4.1: An office environment showcasing the wide 160° beam angle of the T8 LED tubes, providing uniform illumination.

5. Maintenance

Sunco T8 LED Tube Light Bulbs are designed for long-term, maintenance-free operation.

  • Cleaning: To clean the tubes, ensure the power is off and the tubes are cool. Gently wipe with a soft, dry, or slightly damp cloth. Avoid abrasive cleaners or solvents.
  • Replacement: With an average lifespan of 50,000 hours, these LED tubes require infrequent replacement. Replace tubes only when they reach the end of their operational life.
  • Inspection: Periodically inspect the tubes and fixture for any signs of damage or loose connections.
Diagram of T8 LED tube construction, highlighting frosted glass, LED chips, and G13 base

Image 5.1: Internal components of the T8 LED tube, showing robust glass construction, super bright LED chips, and a standard G13 base.

6. Troubleshooting

If you encounter issues with your Sunco T8 LED Tube Light Bulbs, refer to the following troubleshooting guide:

ProblemPossible CauseSolution
Bulb does not light up.
  • No power to the fixture.
  • Incorrect wiring (for Type B).
  • Incompatible or faulty ballast (for Type A).
  • Loose connection.
  • Check circuit breaker and wall switch.
  • Verify wiring according to Type B instructions.
  • Check ballast compatibility (refer to Section 3.3) or consider ballast bypass.
  • Ensure tubes are securely seated in lamp holders.
Bulb flickers.
  • Incompatible or failing ballast (for Type A).
  • Loose connection.
  • Voltage fluctuations.
  • Bypass the ballast (Type B installation).
  • Ensure tubes are securely seated.
  • Consult an electrician to check power supply stability.
Reduced brightness.
  • Dust or dirt on the tube.
  • End of product life.
  • Clean the tube gently (refer to Section 5).
  • Replace the tube.

If the problem persists after attempting these solutions, please contact Sunco Lighting customer support.

7. Specifications

FeatureDetail
BrandSunco Lighting
Model NumberT8_HY_F
Light TypeLED
Bulb Shape SizeT8
Bulb BaseG13
Wattage20 Watts
Brightness2400 Lumens
Color Temperature5000 Kelvin (Daylight White)
Voltage120-277 Volts (Accepted frequency: 50-60 Hertz)
Incandescent Equivalent150 Watts
Beam Angle160°
Average Life50,000 Hours
MaterialGlass
Lens FinishFrosted
Indoor/Outdoor UsageIndoor (Damp Location Rated)
CertificationsETL, FCC, RoHS
Item Weight26.7 pounds (for 50-pack)
Package Dimensions49.7 x 16 x 8.2 inches
UPC840360602007

8. Warranty and Support

Sunco Lighting provides a 7-Year Protection for these T8 LED Tube Light Bulbs. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical assistance, or any questions regarding your product, please contact Sunco Lighting customer support. You can typically find contact information on the product packaging or the official Sunco Lighting website.

Sunco Lighting is based in the USA and offers knowledgeable support specialists to assist you.

© 2023 Sunco Lighting. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.