PDP REMATCH Enhanced Wired Controller for Nintendo Switch

Introduction

This manual provides instructions for the setup, operation, and maintenance of your PDP REMATCH Enhanced Wired Controller. This controller is officially licensed for use with Nintendo Switch, Nintendo Switch Lite, and Nintendo Switch - OLED Model consoles.

Image: The PDP REMATCH Enhanced Wired Controller, showcasing its official Nintendo licensing and Super Mario Kart Racers design.

Package Contents

• PDP REMATCH Enhanced Wired Controller
• Integrated 10-foot USB Cable
• Instruction Manual (this document)

Setup

Connecting the Controller

1. Ensure your Nintendo Switch console is powered on and updated to the latest system software.
2. Locate an available USB port on your Nintendo Switch dock. If using a Nintendo Switch Lite or Switch - OLED Model in handheld mode, you may need a USB-C to USB-A adapter (not included).
3. Plug the USB connector of the controller's integrated 10-foot cable into the USB port on your Nintendo Switch dock or adapter.
4. The controller will automatically be recognized by your Nintendo Switch. The LED indicator on the controller will illuminate to confirm connection.
5. You can now use the controller for gameplay.

Image: The PDP REMATCH Enhanced Wired Controller, ready for connection via its integrated USB cable.

Operating Instructions

Basic Controls

The PDP REMATCH Enhanced Wired Controller features standard Nintendo Switch button layouts, including A, B, X, Y buttons, directional pad, left and right analog sticks, L/R and ZL/ZR shoulder buttons, and Plus/Minus/Home/Capture buttons.

Programmable Back Buttons

The controller includes dual programmable back buttons for customized gameplay. These buttons can be mapped to replicate any other button on the controller for quicker responses during gameplay.

1. To Program: Press and hold the 'Function' button (usually a small button on the back or bottom of the controller) and the back button you wish to program simultaneously.
2. While holding, press the button you want to map to the back button (e.g., 'A' button).
3. Release all buttons. The back button is now programmed.
4. Repeat for the other back button if desired.

Image: The programmable back buttons located on the underside of the controller, designed for quick access and customization.

Audio Features

The controller is equipped with a 3.5mm audio jack for connecting a headset, allowing for in-game audio and USB-chat in supported titles.

Image: The 3.5mm audio jack on the controller, demonstrating its use for connecting a headset.

On-Board Audio Controls

Easily adjust your game volume directly from the controller using the D-pad. Specific instructions for volume adjustment may vary slightly by game or system settings, but generally involve holding a function button and pressing up/down on the D-pad.

Image: A close-up of the D-pad, highlighting its role in quickly adjusting audio levels during gameplay.

Ergonomic Design

The controller is designed for comfort during extended gaming sessions, featuring an ergonomic shape that fits naturally in your hands.

Image: The ergonomic design of the controller, shaped for comfortable handling during gameplay.

Image: A user holding the controller, demonstrating its comfortable fit during active use.

Maintenance

To ensure the longevity and optimal performance of your controller, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe down the controller. For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals or abrasive cleaners.
• Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Cable Care: Do not sharply bend or pull on the USB cable. Always grasp the plug when disconnecting it from the console.
• Avoid Liquids: Keep the controller away from liquids to prevent internal damage.

Troubleshooting

If you encounter issues with your controller, refer to the following common solutions:

• Controller Not Responding:
  • Ensure the USB cable is securely plugged into both the controller and the Nintendo Switch dock/adapter.
  • Try plugging the controller into a different USB port on the dock.
  • Restart your Nintendo Switch console.
• Audio Issues (No Sound/Chat):
  • Verify your headset is fully plugged into the 3.5mm audio jack on the controller.
  • Check the in-game audio settings and your Nintendo Switch system audio settings to ensure output is directed to the headset.
  • Adjust the volume using the on-board D-pad controls.
  • Test the headset with another device to confirm it is functioning correctly.
• Programmable Buttons Not Working:
  • Re-program the back buttons following the instructions in the 'Operating Instructions' section.
  • Ensure you are pressing the correct buttons during the programming sequence.

Specifications

Warranty and Support

For warranty information and customer support, please refer to the official PDP website or contact their customer service directly. Keep your proof of purchase for warranty claims.

Online Support: Visit www.pdp.com/support for FAQs, troubleshooting guides, and contact options.