1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your QttyElok WiFi Tuya Access Control System Kit R01Tuya with Bolt Lock. This system offers convenient access control for gates and doors, featuring smartphone app remote control, wireless remote transmitters, and an electric drop bolt lock for enhanced security. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Safety Information
- Ensure all power is disconnected before performing any installation or wiring procedures.
- Installation should be performed by qualified personnel if you are unfamiliar with electrical wiring.
- Use only the specified power adapter (DC12V / 2A) to prevent damage to the system.
- Keep the system components away from water and extreme temperatures.
- Do not attempt to modify or repair the system components yourself. Contact support for assistance.
- Ensure proper grounding for all electrical connections.
3. Package Contents
Verify that all items listed below are included in your package:
- 1 x Tuya Remote Receiver
- 1 x Buzzer
- 1 x Power Adapter (Power plug)
- 2 x Remote Transmitters
- 1 x Electric Drop Bolt Lock
- 1 x Door Exit Button
- Connecting Wires
- English Instruction Manual
Image: Overview of the QttyElok WiFi Tuya Access Control System Kit components.
4. Product Overview
The QttyElok R01Tuya Access Control System is designed for secure and convenient door access. It integrates a 433MHz wireless receiver with a Tuya WiFi module, allowing control via remote transmitters, an exit button, or the Tuya smartphone application. The system includes an electric drop bolt lock, which is a fail-safe (NC type) mechanism, meaning it locks when powered on and unlocks when power is removed, suitable for wooden and metal doors.
Key Features:
- Tuya APP Control: Unlock doors remotely via smartphone, manage members, and view access logs.
- 433MHz Wireless Remote: Control access with included remote transmitters, effective up to 30 meters. Supports up to 40 remotes.
- Electric Drop Bolt Lock: NC type (fail-safe), 500lbs holding force, ideal for wooden and metal doors.
- Adjustable Locking Delay: Configurable delay of 0, 5, or 10 seconds.
- Exit Button: Provides a simple, physical exit option.
Image: Dimensions of the remote control receiver, showing working voltage and frequency.
Image: Specifications and dimensions for the Push to Exit button.
Image: Specifications for the remote control transmitters, including power and frequency.
5. Setup & Installation
This section guides you through the physical installation and initial setup of your access control system. Ensure all power is off before beginning.
5.1 Wiring Diagram
Follow the wiring diagram carefully to connect all components. The system is designed for straightforward installation, but professional assistance is recommended if you are unsure about electrical connections.
Image: Detailed wiring diagram showing connections between the main control board, speaker, exit button, electric drop bolt lock, and power supply.
Video: Demonstrates the wiring and basic functionality of the Wireless Access Control System.
5.2 Electric Drop Bolt Lock Installation
The electric drop bolt lock is an NC (Normally Closed) type, meaning it is locked when power is applied and unlocks when power is removed. This is a fail-safe configuration. Install the lock securely on your door frame and door, ensuring proper alignment for the bolt mechanism.
Video: Shows the packaging and operation of the Electric Drop Bolt Lock, highlighting its fail-safe (NC) functionality and delay time settings.
The delay time for the lock can be preset to 0s, 3s, or 6s using the switch on the lock unit. Ensure this is set according to your requirements during installation.
6. Operating Instructions
6.1 Connecting to Tuya APP
- Adjust the time setting on the remote receiver to 10 seconds.
- Press and hold the RF-Key button on the remote receiver until the LED lights flash red and green alternately.
- Release the RF-Key. The board is now in pairing mode.
- Open the Tuya APP on your smartphone.
- Click "Add Device" and search for nearby devices.
- Select the WiFi device and follow the in-app instructions to complete the pairing.
Once connected, you can use the Tuya APP to unlock the door, manage access members, and view door opening records.
6.2 Connecting Remote Transmitters
- Adjust the time setting on the remote receiver to 0 seconds.
- Press the RF-Key on the remote receiver. The green light will flash.
- While the green light is flashing, press the desired button on your remote transmitter. The red light on the receiver will illuminate, indicating successful pairing.
After pairing, you can use the remote transmitter to unlock the door. The system supports up to 40 remote transmitters.
6.3 Operating Modes
The remote receiver supports different operating modes, which can be selected via a switch on the board:
- Latched Mode: (Middle position) In this mode, after unlocking, the door remains unlocked until manually re-locked. Remote or Tuya app unlock is not valid for re-locking.
- Toggle Mode: (Leftmost position) After remote unlocking, the remote needs to be pressed once more to re-lock the door.
- Momentary Mode: (Rightmost position) This model will automatically lock after a delay of 5 seconds or 10 seconds (adjustable via switch) after unlocking.
6.4 Deleting Remote Transmitters
To delete all paired remote transmitters from the receiver:
- Adjust the time setting on the remote receiver to 0 seconds.
- Press and hold the RF-Key button for 15 seconds until the green light flashes.
- Release the RF-Key. All previously paired remotes are now deleted.
After deletion, the remotes will no longer be able to open the door, but the Tuya APP and push switch will still function.
7. Maintenance
- Regularly check all wiring connections for tightness and signs of wear.
- Keep the electric drop bolt lock and exit button clean and free from debris.
- Ensure the remote transmitters' batteries (2x CR2016) are replaced when their performance degrades.
- Periodically test the system's functionality using both the remote transmitters, exit button, and Tuya APP.
- Keep the firmware of the Tuya module updated via the Tuya APP for optimal performance and security.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| System not powering on. | No power to the adapter; loose connections. | Check power outlet and adapter connection. Verify all wiring is secure. |
| Remote transmitter not unlocking the door. | Remote not paired; low battery in remote; out of range. | Re-pair the remote transmitter (Section 6.2). Replace CR2016 batteries. Ensure you are within 30 meters of the receiver. |
| Tuya APP not connecting or unlocking. | WiFi signal issue; incorrect pairing; APP not updated. | Check WiFi connection. Re-pair the device with the Tuya APP (Section 6.1). Update the Tuya APP to the latest version. |
| Electric drop bolt lock not engaging/disengaging properly. | Misalignment; wiring issue; incorrect delay setting. | Check physical alignment of the lock and strike plate. Verify wiring to the lock. Adjust delay time setting on the lock unit. |
| Buzzer not sounding. | Loose connection; faulty buzzer. | Check buzzer wiring. Replace buzzer if necessary. |
9. Specifications
Tuya Remote Receiver:
- Working Voltage: DC12V
- Working Frequency: 433MHz
- Material: ABS Plastic
- Locking Time Delay: 0/5/10 seconds adjustable
- Working Mode: Momentary/ Latched / Toggle
- Lock mode: NC / NO (Fail safe / fail secure) - Note: This kit uses NC (Fail Safe)
- Built-in Tuya module, supports WiFi Tuya app
Remote Transmitter:
- Working voltage: 6VDC
- Working Frequency: 433MHz
- Operating Current: 8mA
- Powered by: 2pcs CR2016 batteries
- Case Material: Metal
Electric Drop Bolt Lock:
- Material: Aluminium Alloy
- Working Voltage: DC12V
- Dimension: 150*34*28 mm
- Secure Mode: Locked when power on, unlocked when power off (NC type / Fail Safe)
- Working Current: Start-up: 1.2A, Operating: 0.25A
Push to Exit Button:
- Product Size: 35X25X90mm (L/W/H)
- Working Voltage: DC12V
- Sustained Current: 3A 36VDC
- Contact Output: NO/COM
- Material: Aluminum alloy
Power Adapter:
- Input: AC100V-240V 50/60Hz
- Output: DC12V / 2A (2000mA)
- Cable length: 1.5 meter
10. Warranty & Support
For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official QttyElok website. Keep your purchase receipt as proof of purchase for warranty claims.
