Anysun Self-Leveling Sewer Inspection Camera with Locator

1. Introduction

This user manual provides comprehensive instructions for the Anysun Self-Leveling Sewer Inspection Camera with Locator. This system is designed for inspecting pipes, sewer lines, drains, ducts, and other hard-to-reach areas. It features a 9-inch HD monitor, a 512Hz self-leveling camera probe with adjustable LED lights, a 150ft/45m durable cable with a meter marker, and DVR functionality for recording inspections.

2. Safety Information

• Always ensure the device is powered off before connecting or disconnecting components.
• Do not immerse the monitor or control unit in water. The camera probe is IP68 waterproof, but other components are not.
• Handle the camera cable with care to prevent kinks or damage.
• Keep the device away from extreme temperatures and direct sunlight.
• Use only the provided charger for the battery.
• Do not attempt to disassemble or repair the unit yourself. Contact customer support for assistance.

3. Package Contents

The Anysun Self-Leveling Sewer Inspection Camera system includes the following components:

• 9-inch HD Monitor with DVR Functionality
• 512Hz Self-Leveling Camera Probe
• 150ft/45m Fiberglass Push Cable with Meter Marker
• 512Hz Locator Receiver
• Battery Control Box (4500mAh rechargeable battery)
• Power Adapter/Charger
• 32GB SD Card (pre-installed or included)
• Camera Protective Covers/Centering Skids (various sizes)
• Connection Cables
• User Manual

4. Product Overview

Figure 1: Complete Anysun Sewer Camera System with Locator. This image displays the main components including the monitor, cable reel, camera probe, and locator receiver.

Figure 2: The 9-inch HD monitor with DVR recording capabilities. The monitor allows for clear viewing of the inspection area and features buttons for recording video and taking photos, which are saved to the included 32GB SD card.

Figure 3: The IP68 waterproof camera probe with self-leveling function and 12 adjustable LED lights. The self-leveling feature ensures the image remains upright, while adjustable LEDs provide optimal illumination in dark environments.

Figure 4: The 7mm diameter fiberglass push cable, thicker for enhanced durability and flexibility. It features meter markings to accurately measure the distance the camera has traveled into the pipe.

Figure 5: The 512Hz locator receiver being used to pinpoint the camera's location. The camera probe emits a 512Hz signal, allowing the receiver to accurately detect its position and depth.

Figure 6: The 4500mAh rechargeable battery control box. This unit provides power to the system and offers 8-10 hours of continuous operation on a full charge.

5. Setup Instructions

1. Unpack Components: Carefully remove all items from the carrying case.
2. Charge Battery: Connect the power adapter to the battery control box and a power outlet. Ensure the battery is fully charged before first use (8-10 hours operating time).
3. Connect Camera Probe: Securely attach the camera probe to the end of the fiberglass push cable. Ensure a tight connection to maintain waterproofing.
4. Attach Centering Skid (Optional): Depending on the pipe diameter, select an appropriate centering skid and attach it to the camera probe. This helps keep the camera centered in larger pipes for a better view.
5. Connect Monitor: Plug the camera cable connector from the reel into the designated input port on the 9-inch HD monitor.
6. Power On: Turn on the power switch on the monitor unit. The screen should display the camera feed.
7. Prepare Locator: Ensure the 512Hz locator receiver has fresh batteries (if applicable) and is powered on.

6. Operating Instructions

6.1 Camera Operation

1. Power On: Press the 'ON/OFF' button on the monitor to power on the system.
2. Adjust LED Lights: Use the 'LED +/-' buttons on the monitor to adjust the brightness of the 12 LED lights on the camera probe. Increase brightness for darker pipes and decrease for reflective surfaces.
3. Push Cable: Carefully feed the camera probe and cable into the pipe. Use the meter markings on the cable to track the depth.
4. Self-Leveling: The camera probe features an automatic self-balancing gravity bearing, ensuring the image on the monitor remains upright regardless of the camera's orientation in the pipe.
5. Recording Video: Press the 'REC' button to start recording video. Press again to stop. Videos are saved to the SD card.
6. Taking Photos: Press the 'PHOTO' button to capture still images. Photos are saved to the SD card.
7. Playback: Use the 'PLAY' button to review recorded videos and photos from the SD card.

6.2 Using the 512Hz Locator

The camera probe has a built-in 512Hz transmitter, allowing you to accurately locate its position within the pipe using the handheld locator receiver.

1. Activate Transmitter: The 512Hz transmitter in the camera probe activates automatically when the camera system is powered on.
2. Power On Locator: Turn on the handheld 512Hz locator receiver.
3. Select Mode: The locator typically has 'Far' and 'Near' modes. 'Far' mode detects signals up to 23ft, and 'Near' mode detects up to 13ft. Start with 'Far' mode for initial detection.
4. Adjust Sensitivity: Adjust the sensitivity knob on the locator to get a clear signal. A higher sensitivity setting will detect the signal from further away.
5. Locate Signal: Move the locator receiver along the ground above the pipe. The signal strength indicator (visual and/or audio) will increase as you get closer to the camera probe.
6. Pinpoint Location: Once a strong signal is detected, switch to 'Near' mode and fine-tune the sensitivity to pinpoint the exact location and depth of the camera probe. The antenna on the locator should be parallel to the ground for best results.

7. Maintenance

• Cleaning: After each use, clean the camera probe and cable with a damp cloth. Avoid harsh chemicals that could damage the materials.
• Storage: Store the system in its original carrying case in a cool, dry place away from direct sunlight.
• Battery Care: Recharge the battery regularly, even if not in use, to maintain its lifespan. Do not overcharge or completely drain the battery.
• Cable Inspection: Periodically inspect the cable for any signs of wear, cuts, or damage. Replace if necessary.

8. Troubleshooting

9. Specifications

• Monitor Size: 9 inches
• Video Capture Resolution: 1080p
• Cable Length: 150ft/45m
• Cable Diameter: 7mm
• Camera Features: Self-leveling, 512Hz transmitter, 12 adjustable LED lights, IP68 waterproof
• Battery Capacity: 4500mAh Lithium Ion (included)
• Operating Time: 8-10 hours (on full charge)
• Storage: 32GB SD Card (included)
• Product Dimensions: 19.5 x 17.5 x 11.5 inches
• Item Weight: 2.2 pounds
• Manufacturer: anysun
• ASIN: B0C3D3SXDN

10. Warranty and Support

The Anysun Self-Leveling Sewer Inspection Camera with Locator comes with a 1-year service warranty. If you encounter any problems or require assistance with your product, please contact Anysun customer support. Refer to the contact information provided in your product packaging or on the official Anysun website for support details.