Welcome
Thank you for choosing the Vooda LED Light Emitting Exhaust Tail Pipe. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new automotive accessory. Please read this manual thoroughly before installation and keep it for future reference.
Important Safety Instructions
- Wear protective gloves: Always wear appropriate gloves during installation to prevent injury from sharp edges or hot surfaces.
- Maintain clearance: Ensure the distance between the tail pipe and the vehicle bumper is more than 2cm (approximately 0.8 inches). This prevents the bumper from being damaged by high temperatures from the exhaust.
- Avoid hot surfaces: Do not install this product on a vehicle that has just been driven or is currently running, as the exhaust pipe will be extremely hot and can cause severe burns. Allow the vehicle to cool completely before beginning installation.
- Electrical safety: The wiring includes a fuse box. Ensure all electrical connections are secure and properly insulated to prevent short circuits or electrical hazards. Do not modify the vehicle's existing wiring harness without professional guidance.
What's in the Box
- 1x Vooda LED Light Emitting Exhaust Tail Pipe
- 1x Wire set with fuse box
Product Specifications
| Material | Stainless Steel with Carbon Fiber Pattern Shell |
| Dimensions (L x W) | Approximately 6.3" x 3.54" (16cm x 9cm) |
| Weight | Approximately 1.1 pounds (350g) |
| Light Color | Blue (as per product variant) |
| Model Type | Straight Style |
| Compatible Exhaust Pipe Diameter | 1.4 to 2.1 inches (3.5cm to 5.3cm) |
| Installation Type | Bolt locking (3-bolt clamping design) |
| Bulb Type | LED |
Installation Guide
This section provides detailed instructions for installing your Vooda LED Light Emitting Exhaust Tail Pipe. Please ensure your vehicle's exhaust pipe is cool before beginning.
Pre-Installation Check
- Exhaust Pipe Compatibility: Verify that your vehicle's exhaust tailpipe is straight and has a diameter between 1.4 and 2.1 inches (3.5cm to 5.3cm). This product is not suitable for curved tailpipes.
- Clearance: Confirm there is sufficient space (more than 2cm) between the existing tailpipe and the bumper to accommodate the new LED tail pipe and prevent heat damage.
Image Description: This image illustrates the dimensions of the Vooda LED Light Emitting Exhaust Tail Pipe, showing its length (6.46 inches), outer diameter (3.62 inches), and inner diameter (2.56 inches). It also clearly indicates that the product is suitable for straight draft tubes (exhaust pipes) and not suitable for curved tailpipes, with visual examples of both compatible and incompatible exhaust types.
Step-by-Step Installation
- Prepare the Tail Pipe: Adjust the angle of the LED tail pipe's clamp mechanism if necessary. Use tools to tighten the bolts to fix the desired installation angle.
- Position the Tail Pipe: Carefully slide the LED light exhaust pipe onto the original vehicle's exhaust pipe. Ensure it is aligned correctly and positioned to your preference, maintaining the required clearance from the bumper.
- Secure the Clamp: Using a wrench, tighten the 3-bolt clamping design to firmly secure the LED tail pipe to the vehicle's exhaust. Double-check that it is stable and cannot easily move.
- Electrical Connection (Wiring):
- Connect the red wire from the LED tail pipe's wire set to the positive pole of your vehicle's tail lamp or another suitable 12V positive power source. The wire set includes a fuse box for protection.
- Connect the black wire from the LED tail pipe's wire set to a reliable grounding point on the vehicle chassis.
- Test the Light: Once all connections are secure, turn on your vehicle's tail lights to test if the LED light on the tail pipe illuminates correctly.
Image Description: An exploded diagram of the Vooda LED Light Emitting Exhaust Tail Pipe, highlighting its key components: the stainless steel clamp with rivet fixing, the carbon fiber pattern sleeve, the rolled edge of the exhaust outlet, and the integrated blue LED light ring.
Image Description: A four-panel image illustrating the installation process. Panel 1 shows placing the LED exhaust pipe onto the vehicle's original pipe. Panel 2 shows adjusting the position and tightening the clamp. Panel 3 depicts connecting the red wire to a positive terminal and the black wire to ground. Panel 4 shows the finished installation with the blue LED light illuminated.
Image Description: A clear wiring schematic for the LED tail pipe. It shows the blue wire (labeled "Blue docking") and red wire (labeled "Red docking") coming from the tail pipe. The red wire connects to a "Red fuse" and then to the "tail lamp positive pole." The black wire connects to "Black grounding." The diagram also includes visual examples of compatible and incompatible exhaust pipe types for installation.
Installation Demonstration Video
Video Description: This video demonstrates the installation process of the Vooda LED Light Emitting Exhaust Tail Pipe. It shows how to adjust the angle, secure the pipe to the vehicle's exhaust, and connect the wiring. The video also showcases the blue and red flame effects of the LED light once installed.
Operating Your LED Tail Pipe
The Vooda LED Light Emitting Exhaust Tail Pipe operates in conjunction with your vehicle's tail lights. Once properly installed and wired, the LED light will illuminate when your vehicle's tail lights are active, creating a distinctive visual effect.
Image Description: A product image of the Vooda LED Light Emitting Exhaust Tail Pipe, showcasing its carbon fiber pattern exterior and the vibrant blue flame-like LED light effect emanating from the exhaust opening.
Care and Maintenance
- Cleaning: Regularly clean the exterior of the tail pipe with a soft cloth and mild automotive cleaner. Avoid abrasive materials that could scratch the carbon fiber pattern or stainless steel.
- Inspection: Periodically check the tightness of the mounting bolts and the integrity of the electrical connections. Ensure there are no loose wires or signs of corrosion.
- Temperature Resistance: The LED lamp is designed for stable operation in high-temperature areas and is waterproof. However, avoid direct high-pressure water jets on the LED component during cleaning.
Image Description: This image features two panels demonstrating the durability of the LED lamp. The top panel shows the LED lamp submerged in water, labeled "Waterproof Led lamp," indicating stable operation. The bottom panel shows the LED lamp in a desert-like environment with flames, labeled "High temperature resistant Led lamp," also indicating stable operation and long service life in high-temperature areas.
Troubleshooting
- LED Light Not Illuminating:
- Check all electrical connections to ensure they are secure and properly connected to the positive and ground terminals.
- Inspect the fuse in the wire set. If blown, replace it with a fuse of the same rating.
- Ensure the vehicle's tail lights are turned on.
- Loose Tail Pipe:
- Re-tighten the 3-bolt clamping mechanism. Ensure the bolts are securely fastened.
- Verify that the tail pipe is correctly seated on the vehicle's exhaust pipe.
Warranty and Customer Support
The Vooda LED Light Emitting Exhaust Tail Pipe comes with a 1-year warranty from the date of purchase. If you encounter any issues or require assistance, please contact Vooda customer support through your retailer or the official Vooda website.