TigerDad Overbed Table with Wheels Instruction Manual

1. Introduction

Thank you for choosing the TigerDad Overbed Table with Wheels. This versatile and sturdy table is designed to provide a convenient surface for various activities, whether you are in bed, on a sofa, or using it as a standalone desk. Its adjustable length and height make it suitable for different bed sizes and user preferences. Please read this manual carefully before assembly and use to ensure proper operation and safety.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in injury or damage to the product.

• Follow all instructions provided for assembly and use.
• Ensure the product is stable and does not tip over before placing items on it or applying weight.
• Do not exceed the maximum weight capacity of 350 lbs (when steel frame legs are not extended).
• Always engage the wheel brakes when the table is in a desired stationary position to prevent accidental movement.
• Keep hands and fingers clear of moving parts during adjustment to prevent pinching.
• Do not allow children to climb on or play with the table.
• Regularly inspect all fasteners and connections to ensure they remain tight and secure.
• Keep the table away from excessive moisture or direct heat sources.

3. Product Features

• Adjustable Length & Height: Designed to fit various bed sizes, including queen and king. Length adjusts from 55.1 inches to 82.7 inches, and height from 25.6 inches to 37.4 inches.
• Multifunctional Design: Can be used as an overbed table, a mobile computer desk, a writing desk, or a study table.
• Mobile with Brakes: Equipped with four 1.5-inch casters, each with a brake, for easy mobility and secure positioning.
• Sturdy Construction: Made with a 15mm thick E1 grade MDF panel and a thicker metal frame, supporting up to 350 lbs.
• Fence Design: Integrated fence on the tabletop helps prevent items from sliding off.

4. Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• 1x Overbed Desk
• 1x Assembly Instruction Manual
• 1x Installation Tools (e.g., Allen wrench, screwdriver)
• All necessary screws, bolts, and hardware

5. Assembly Instructions

Assembly typically takes approximately 10 minutes. It is recommended to have a second person assist with assembly for easier alignment and stability, especially when adjusting the length and height.

1. Unpack all components and lay them out on a clean, flat, and soft surface to prevent scratches.
2. Identify all parts according to the parts list in the included Assembly Instruction Manual.
3. Attach the caster wheels to the base of the table legs. Ensure they are securely fastened.
4. Connect the main frame components using the provided hardware. Do not fully tighten all screws until the entire frame is assembled.
5. Carefully place the MDF tabletop onto the assembled frame and secure it with the appropriate screws.
6. Once all components are in place, gradually tighten all screws, ensuring the table is level and stable. A leveler may be helpful for precise adjustment.
7. Test the table's stability and the functionality of the wheels and brakes before use.

Detailed diagram illustrating the adjustable length and height of the TigerDad Overbed Table, with measurements for both compact and extended configurations.

6. Operation

6.1 Adjusting Length and Height

The TigerDad Overbed Table is designed for easy adjustment to suit various needs and bed sizes.

• To adjust the length, locate the adjustment knobs or levers on the side frames. Loosen them, extend or retract the frame to the desired length (55.1 to 82.7 inches), and then securely tighten the knobs/levers.
• To adjust the height, locate the height adjustment mechanisms on the vertical supports. Loosen them, raise or lower the tabletop to the desired height (25.6 to 37.4 inches), and then securely tighten the mechanisms. Ensure both sides are adjusted to the same height to maintain a level surface.

6.2 Using the Wheels and Brakes

The table is equipped with four smooth-rolling casters for easy movement.

• To move the table, ensure all wheel brakes are disengaged. Gently push or pull the table to its desired location.
• To secure the table in place, press down on the brake levers located on each wheel until they click into the locked position. This prevents accidental rolling.
• Always engage the brakes when the table is in use, especially when supporting heavy items or when a stable surface is required.

The TigerDad Overbed Table positioned over a bed, demonstrating its use as a versatile workspace for a computer monitor and laptop.

The TigerDad Overbed Table configured as a standalone desk, suitable for use with an office chair, highlighting its adaptability beyond just over-bed use.

Close-up view of the integrated fence design on the tabletop, which helps prevent items from sliding off the surface.

Detail of the metal silent cardan wheels, equipped with brakes, ensuring stability and easy mobility of the overbed table.

7. Care and Maintenance

• Cleaning: Wipe the table surfaces with a dry cloth. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by immediate drying. Avoid abrasive cleaners or harsh chemicals.
• Inspection: Periodically check all screws, bolts, and connections to ensure they are tight. Re-tighten if necessary.
• Wheel Maintenance: Keep the wheels free of debris (hair, lint, etc.) to ensure smooth rolling.
• Storage: If storing the table for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.

8. Troubleshooting

9. Specifications

10. Customer Support

For any questions, concerns, or assistance with your TigerDad Overbed Table, please contact the manufacturer or seller directly. Refer to your purchase documentation for specific contact information.

You can also visit the official TigerDad Store on Amazon for more information and support:

TigerDad Official Store