Introduction
The FLEXTAIL Max Repel Portable Electric Mosquito Repeller is designed to provide effective mosquito protection for outdoor activities. This compact and rechargeable device utilizes advanced heating technology to activate repellent pads, creating a protective zone against mosquitoes and midges. It features two operating modes for versatility and can also serve as an emergency power supply for your mobile devices.

Figure 1: Max Repel Portable Electric Mosquito Repeller (Green)
Product Features
- Ultra-Portable Design: Compact dimensions and lightweight (7.4oz) for easy carrying during outdoor activities like backpacking, camping, and patio use.
- 329°F Double-Sided Heating: Utilizes APESPARK technology to rapidly heat repellent pads to an optimal 329°F, ensuring maximum efficacy and coverage.
- Two Versatile Modes:
- Outdoor Mode (Red Light): Provides up to 30ft protection for 7-12 hours.
- Camp Mode (Green Light): Offers up to 10ft protection for 13-19 hours.
- Emergency Power Supply: Built-in 9600mAh rechargeable battery can charge mobile devices via USB, extending the utility of the device outdoors.
- Chemical-Free Skin Contact: Repels mosquitoes without direct skin contact with chemicals, and operates without an open flame.

Figure 2: Key features of the Max Repel S device.
Package Contents
Please verify that all items are present in your package:
- Max Repel S Device (Green)
- Type-C Charging Cable
- User Manual
- Product Box
Note: Repellent pads are NOT included and must be purchased separately. Suitable pad size: 0.86" x 1.37" x 0.11".

Figure 3: Included items in the Max Repel S package.
Setup
- Charge the Device: Before first use, fully charge the Max Repel S using the provided Type-C cable. The battery indicator lights will show charging progress.
- Insert Repellent Pads:
Locate the slot for the repellent pads. Insert 1-2 mosquito repellent tablets into the dual-heating electronic repellent. Ensure the pads are correctly seated. The recommended pad size is 0.86" x 1.37" x 0.11". If your pads are larger, they may need to be trimmed.

Figure 4: Step-by-step guide for inserting repellent pads and activating the device.
Operating Instructions
- Power On: Double-click the power button for 2 seconds to activate the repeller. The device will start in Camp Mode (green light).
- Select Mode:
- To switch from Camp Mode (green light) to Outdoor Mode (red light), single-click the power button.
- To switch back to Camp Mode, single-click the power button again.
Allow 5-10 minutes for the device to fully establish the protection zone after activation.

Figure 5: Understanding the two mosquito repellent modes.
- Power Off: When finished, single-click the switch again to turn off the repeller.
- Emergency Power Bank Function:
The built-in 9600mAh battery can be used to charge other USB-powered devices. Connect your phone, wireless headset, or other gadgets to the appropriate USB port on the repeller. Charging times will vary depending on the device being charged.

Figure 6: Using the Max Repel S as an emergency power supply.
Maintenance
- Cleaning: Ensure the device is turned off and completely cooled down before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Remove any used repellent pads before storing for extended periods.
- Battery Care: For optimal battery life, charge the device fully before long-term storage and recharge it every 3-6 months if not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery; incorrect power button press. | Charge the device fully. Ensure you double-click the power button for 2 seconds to activate. |
| Mosquitoes are still present. | Repellent pads not inserted; device not heated sufficiently; incorrect mode for area size; windy conditions; device placement. | Ensure repellent pads are inserted. Allow 5-10 minutes for heating. Switch to Outdoor Mode for larger areas. Place the device upwind in windy conditions. Ensure device is in the center of the desired protection zone. |
| Repellent pads do not fit. | Pads are not the correct size. | Use pads with dimensions 0.86" x 1.37" x 0.11". Trim larger pads if necessary. |
| Battery drains quickly. | Using Outdoor Mode; charging other devices; aging battery. | Outdoor Mode consumes more power. Limit use of power bank function if extended repellent time is needed. Battery life naturally degrades over time. |
| Device not heating. | Internal malfunction. | Contact customer support for assistance. |
If the problem persists after trying these solutions, please contact FLEXTAIL customer support.
Important Warnings
- Repellent pads are NOT included.
- Mosquito repellent suitable size: 0.86" x 1.37" x 0.11".
- Better place it in the center of the desired repellent zone.
- If it is windy, place the repellent upwind of where you are sitting.
- Do not cover repeller while it is in use.
- To protect a larger area, please insert two mats or use multiple repellers.
- Keep away from water during using.
- Do not use in a closed room or in a tent where the air is not flowing. Ensure adequate ventilation.
- Allow the device to cool down completely before handling or storing after use.

Figure 7: Important warnings for safe and effective use.
Specifications
| Attribute | Detail |
|---|---|
| Brand | FLEXTAIL |
| Model Number | MR-01NR220630 |
| Color | Green |
| Product Dimensions | 3"L x 1.9"W x 7.8"H |
| Item Weight | 9.1 ounces |
| Battery | 9600mAh Lithium Ion (included) |
| Heating Temperature | Up to 329°F (165°C) |
| Protection Range (Outdoor Mode) | Up to 30ft |
| Protection Range (Camp Mode) | Up to 10ft |
| Run Time (Outdoor Mode) | 7-12 hours |
| Run Time (Camp Mode) | 13-19 hours |
| Target Species | Mosquito |
| Manufacturer | Huzhou Jingwei Outdoor Products Manufacturing Co., Ltd |
Warranty and Support
For warranty information, technical support, or any inquiries regarding your Max Repel Portable Electric Mosquito Repeller, please contact FLEXTAIL customer service. Refer to the contact information provided on the product packaging or the official FLEXTAIL website.
Please have your model number (MR-01NR220630) and purchase date ready when contacting support.





