mojawa Run Plus

Mojawa Run Plus Bone Conduction Headphones User Manual

Model: Run Plus

Introduction

This manual provides detailed instructions for the proper use, maintenance, and troubleshooting of your Mojawa Run Plus Bone Conduction Headphones. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

The Mojawa Run Plus headphones feature an open-ear design, 32GB built-in MP3 player, IP68 waterproof rating, and Bluetooth connectivity, making them suitable for various activities including running, swimming, and daily use.

What's in the Box

  • Mojawa Run Plus Bone Conduction Headphones
  • Magnetic Charging Cable
  • Earplugs (2 pairs)
  • Carry Bag
  • User Manual (this document)

Setup and First Use

Charging the Headphones

Before first use, fully charge your Mojawa Run Plus headphones. Connect the magnetic charging cable to the charging port on the headphones and plug the USB end into a compatible USB power adapter (not included) or computer USB port.

A full charge takes approximately 50 minutes and provides up to 8 hours of playtime at 75% volume. A quick 5-minute charge can provide an additional 80 minutes of playtime.

Diagram showing charging times and battery life for Mojawa Run Plus headphones.

Figure 1: Charging and Battery Life Overview

Powering On/Off

To power on, press and hold the Power/Multi-function button until the LED indicator lights up and you hear a voice prompt. To power off, press and hold the Power/Multi-function button until the LED indicator turns off.

Bluetooth Pairing

1. Ensure the headphones are powered off.

2. Press and hold the Power/Multi-function button until the LED indicator flashes red and blue, indicating pairing mode.

3. On your device (smartphone, tablet, etc.), enable Bluetooth and search for "Mojawa Run Plus" in the list of available devices.

4. Select "Mojawa Run Plus" to connect. Once connected, the LED indicator will turn solid blue, and you will hear a confirmation tone.

Diagram illustrating MP3 and Bluetooth modes for Mojawa Run Plus headphones.

Figure 2: MP3 and Bluetooth Mode Overview

MP3 Mode and File Transfer

The headphones feature a 32GB built-in MP3 player. To transfer music files:

1. Connect the headphones to your computer using the magnetic charging cable. The headphones will appear as a removable disk drive.

2. Drag and drop your MP3 audio files into the headphones' storage folder.

3. Safely eject the headphones from your computer before disconnecting the cable.

To switch to MP3 mode, double-click the Power/Multi-function button. To switch back to Bluetooth mode, double-click again.

Operating Instructions

Basic Controls

  • Power On/Off: Press and hold the Power/Multi-function button.
  • Play/Pause: Single press the Power/Multi-function button.
  • Volume Up: Slide finger upwards on the touch control area (located behind the right ear).
  • Volume Down: Slide finger downwards on the touch control area.
  • Next Track: Triple press the Power/Multi-function button.
  • Previous Track: Quadruple press the Power/Multi-function button.
  • Answer/End Call: Single press the Power/Multi-function button during an incoming call.
  • Reject Call: Press and hold the Power/Multi-function button during an incoming call.
  • Switch Mode (Bluetooth/MP3): Double press the Power/Multi-function button.
A person demonstrating the easy touch control on the Mojawa Run Plus headphones.

Figure 3: Easy Touch Control Area

Waterproof Usage (IP68)

The Mojawa Run Plus headphones are IP68 waterproof, allowing submersion up to 2 meters for 2 hours. For optimal performance underwater, it is recommended to use the headphones in MP3 mode, as Bluetooth connectivity may be limited or interrupted when submerged.

When swimming, ensure the touch controls are locked to prevent accidental changes. To lock the touch controls, quickly press the Power/Multi-function button four times consecutively while in Bluetooth mode. A confirmation sound will indicate the controls are locked. Then switch to MP3 mode by double-clicking the Power/Multi-function button. The touchpad is not operational when submerged underwater.

A swimmer using Mojawa Run Plus headphones underwater, highlighting the IP68 waterproof rating.

Figure 4: IP68 Waterproof Rating in Use

Mojawa Run Plus bone conduction headphones submerged in water, demonstrating their waterproof capability.

Figure 5: Mojawa Run Plus Headphones in Water

Maintenance and Care

  • Clean the headphones regularly with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • After swimming or exposure to saltwater/chlorine, rinse the headphones with fresh water and dry thoroughly before charging.
  • Store the headphones in the provided carry bag when not in use to protect them from dust and scratches.
  • Avoid extreme temperatures and direct sunlight.
  • Do not attempt to disassemble or repair the headphones yourself, as this will void the warranty.

Troubleshooting

ProblemPossible CauseSolution
Headphones do not power on.Low battery.Charge the headphones fully.
Cannot pair via Bluetooth.Headphones not in pairing mode; device Bluetooth off; too far from device.Ensure headphones are in pairing mode (flashing red/blue). Turn on device Bluetooth. Move closer to device (within 10 meters).
No sound or low volume.Volume too low; headphones not connected; incorrect mode.Increase volume on headphones and connected device. Re-pair headphones. Ensure correct mode (Bluetooth or MP3) is selected.
Touch controls unresponsive underwater.Touchpad is designed to be non-operational when submerged.This is normal behavior. Use MP3 mode and lock controls before submersion.
Music playback issues in MP3 mode.Corrupted files; insufficient storage; incorrect file format.Ensure MP3 files are not corrupted. Check available storage. Only MP3 format is supported.

Specifications

FeatureDetail
Model NameRun Plus
Connectivity TechnologyWireless (Bluetooth 5.2)
Bluetooth Range10 Meters
Internal Storage32GB (for MP3 playback)
Water Resistance LevelIP68 Waterproof (up to 2 meters for 2 hours)
Battery LifeUp to 8 hours (at 75% volume)
Charging TimeApprox. 50 minutes for full charge; 5 minutes for 80 minutes playtime
Audio Driver TypeBone Conduction Driver
Frequency Range20 Hz - 20,000 Hz
Impedance8 Ohm
Item Weight0.31 Kilograms (10.9 ounces)
MaterialPlastic
Earpiece ShapeOpen-Ear
UPC711523497788

Warranty Information

Mojawa offers a 2-year warranty on all our products, including the Run Plus Bone Conduction Headphones. This warranty covers manufacturing defects and ensures your product functions as intended under normal use. Please retain your proof of purchase for warranty claims.

Support

For further assistance, technical support, or warranty inquiries, please visit the official Mojawa store or contact customer service through the following channels: