1. Introduction
This manual provides essential information for the safe and effective operation of your BETOPPER Mini Moving Head DJ Light, Model LM70SR-1. Please read this manual thoroughly before use and retain it for future reference.
Image 1.1: The BETOPPER Mini Moving Head DJ Light LM70SR-1, showcasing its compact design and control panel.
2. Safety Information
Observe the following safety precautions to prevent electric shock, fire, or injury:
- Ensure the power supply voltage matches the product's requirements (AC 110V).
- Do not open the casing; there are no user-serviceable parts inside. Refer all servicing to qualified personnel.
- Avoid direct eye exposure to the light source.
- Keep the device away from water, moisture, and flammable materials.
- Ensure adequate ventilation around the unit to prevent overheating.
- Always disconnect power before cleaning or maintenance.
3. What's in the Box
Verify that all components are present upon unpacking:
- 1 x BETOPPER Mini Moving Head DJ Light (LM70SR-1)
- 1 x Power Cable
- 1 x Mounting Bracket
- 2 x Screws for Bracket
- 1 x Remote Control
- 1 x User Manual (this document)
Image 3.1: All items included in the product package: the moving head light, bracket, screws, power cable, remote control, and user manual.
4. Product Overview
The BETOPPER LM70SR-1 is a compact RGBW moving head light designed for various stage and event lighting applications. It features 7x8W RGBW LEDs, offering a wide range of colors and effects.
4.1. Dimensions
Image 4.1: Product dimensions showing a height of 9.6 inches, base width of 7.1 inches, and base depth of 6.9 inches. The X-axis rotation is 540 degrees and Y-axis rotation is 200 degrees.
4.2. Control Panel and Connections
Image 4.2: Detailed view of the control panel with LED display and buttons (MODE/ESC, UP, DOWN, ENTER), IR signal receiver, and rear connections including power input/output, fuse, and 3-pin XLR DMX In/Out ports.
5. Setup
5.1. Mounting Options
The light can be installed in several ways:
- Floor Mount: Place the unit on a stable, flat surface using its rubber feet.
- Wall Mount: Use the included bracket and screws to securely attach the light to a wall.
- Truss Mount: Attach the bracket to a truss using appropriate clamps (not included). Ensure the mounting is secure and can support the weight of the fixture.
5.2. Power Connection
Connect the included power cable to the power input port on the rear of the unit and then to a standard AC 110V power outlet. The unit features a power output port for daisy-chaining multiple lights.
Image 5.1: The rear panel illustrating the heat dissipation fan, power connector, and 3-pin XLR In/Out ports for DMX connection.
6. Operating Modes
The BETOPPER LM70SR-1 supports multiple operating modes:
- Auto Mode: The light runs through pre-programmed sequences automatically.
- Sound Activated Mode: The light reacts to music or sound detected by its built-in microphone.
- Master-Slave Mode: Connect multiple units via DMX cables. One unit acts as the master, controlling all other slave units.
- DMX 512 Control Mode: For professional control using a DMX controller.
Image 6.1: The light displaying various RGBW color outputs, demonstrating its versatility in creating different stage effects.
Image 6.2: Examples of light effects, including wash lighting in yellow, purple, and blue, and spot effects in various colors.
7. Remote Control Functions
The included remote control allows for convenient operation of the light. Ensure the remote has a working CR2025 battery.
Image 7.1: Diagram of the remote control, detailing each button's function for power, flash, save, auto modes, manual pan/tilt, music modes, and color selection (R, G, B, W, RG, RB, GB, RGB).
- ON/OFF: Powers the unit on or off.
- Flash: Activates strobe effect.
- Save: Saves current settings.
- Auto 1/2/3: Selects different automatic running modes (fast, slow, selectable).
- Manual: Allows setting PAN/TILT position and color randomly.
- Music 1/2: Activates sound-activated modes.
- X+/X-: Adjusts PAN (horizontal) movement.
- Y+/Y-: Adjusts TILT (vertical) movement.
- R, G, B, W, RG, RB, GB, RGB: Selects specific colors or color combinations.
8. DMX Control
For advanced control, the LM70SR-1 can be connected to a DMX 512 controller. It supports 9 or 14 DMX channels.
8.1. DMX Connection
Use 3-pin XLR cables to connect the DMX OUT of your controller to the DMX IN of the first light. For multiple lights, connect the DMX OUT of the first light to the DMX IN of the second, and so on (daisy-chaining).
Image 8.1: Two BETOPPER moving head lights connected to a DMX console, demonstrating how multiple units can be controlled simultaneously for synchronized effects.
8.2. DMX Channel Assignment
Each light requires a unique DMX start address. Refer to the specific DMX channel chart in the full user manual for detailed channel functions (e.g., Pan, Tilt, Color, Strobe, Dimmer).
9. Maintenance
Regular maintenance ensures optimal performance and longevity of your light.
- Cleaning: Periodically clean the lens and exterior with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
- Fan and Vents: Ensure the cooling fan and ventilation openings are free from dust and debris. Use compressed air if necessary.
- Storage: When not in use, store the light in a dry, dust-free environment.
- Fuse Replacement: If the unit does not power on, check and replace the fuse located near the power input if necessary. Use only fuses of the specified type and rating.
10. Troubleshooting
If you encounter issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not power on. | No power, faulty cable, blown fuse. | Check power connection, try another outlet, replace fuse. |
| Remote control not working. | Dead battery, obstruction, out of range. | Replace CR2025 battery, ensure clear line of sight to IR receiver, move closer. |
| No DMX control. | Incorrect DMX address, faulty cable, incorrect mode. | Verify DMX address, check DMX cables, ensure light is in DMX mode. |
| Light is overheating. | Blocked ventilation, prolonged use in high ambient temperature. | Clear vents, ensure adequate airflow, allow unit to cool down. |
11. Specifications
| Feature | Detail |
|---|---|
| Model Number | LM70SR-1 |
| Light Source | 7 x 8W RGBW LEDs |
| Power Consumption | 56 Watts |
| Voltage | AC 110V |
| Amperage | 0.42 Amps |
| Control Modes | Auto, Sound Activated, DMX 512, Master-Slave, Remote Control |
| DMX Channels | 9/14 Channels |
| Pan Rotation | 540° |
| Tilt Rotation | 180° |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Product Dimensions (LxWxH) | 6.88" x 6.88" x 9.25" |
| Item Weight | 4.44 pounds |
| Average Life | 50,000 Hours |
12. Warranty and Support
BETOPPER products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official Betopper website. Please retain your proof of purchase for warranty claims.
