1. Introduction
This manual provides detailed instructions for the proper use and maintenance of your iKOVWUK Remote Control. This remote control is specifically designed for use with iKOVWUK Laser Level models B1-12, B1-16, D1-8, and D1-12. Please read this manual thoroughly before operating the device to ensure safe and efficient use.
2. Product Overview
The iKOVWUK Remote Control allows for convenient adjustment of your compatible iKOVWUK laser level's horizontal and vertical laser lines from a distance. It operates using infrared connectivity.
Figure 1: Front view of the iKOVWUK Remote Control. The remote is white with a silver-grey faceplate, featuring two black circular buttons labeled 'H' (Horizontal) and 'V' (Vertical), and the 'iKOVWUK' logo at the bottom. A small infrared emitter/indicator is visible at the top.
2.1. Components
- H Button: Activates or deactivates the horizontal laser line.
- V Button: Activates or deactivates the vertical laser line.
- Infrared Emitter: Transmits signals to the laser level.
- Battery Compartment: Located on the back (not visible in image), holds 1 AA battery.
3. Setup
3.1. Battery Installation
- Locate the battery compartment cover on the back of the remote control.
- Slide or gently pry open the cover.
- Insert one (1) AA battery, ensuring the polarity (+/-) matches the diagram inside the compartment.
- Replace the battery compartment cover until it clicks securely into place.
Note: The remote control typically comes with one AA battery included.
3.2. Pairing (Not Applicable)
This remote control operates via infrared (IR) and does not require a pairing process with the laser level. Ensure a clear line of sight between the remote's emitter and the laser level's IR receiver for optimal performance.
4. Operating Instructions
To operate the iKOVWUK Remote Control, ensure your compatible iKOVWUK laser level (models B1-12, B1-16, D1-8, D1-12) is powered on and within range.
4.1. Activating/Deactivating Laser Lines
- Horizontal Line Control: Press the "H" button to toggle the horizontal laser line on or off.
- Vertical Line Control: Press the "V" button to toggle the vertical laser line on or off.
Tip: Point the remote control directly towards the laser level for reliable signal transmission.
5. Maintenance
5.1. Cleaning
Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the surface or internal components.
5.2. Battery Replacement
If the remote control becomes unresponsive or its range decreases, the battery may need replacement. Follow the battery installation steps in Section 3.1.
5.3. Storage
Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, it is recommended to remove the battery to prevent leakage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control is unresponsive. |
|
|
| Reduced operating range. |
|
|
7. Specifications
| Feature | Detail |
|---|---|
| Brand | IKOVWUK |
| Compatible Devices | IKOVWUK Laser Levels B1-12, B1-16, D1-8, D1-12 |
| Connectivity Technology | Infrared (IR) |
| Controller Type | Button Control (H for Horizontal, V for Vertical) |
| Power Source | 1 x AA Battery (included) |
| Item Weight | 4.5 ounces (approx. 127.5 grams) |
| Package Dimensions | 3.54 x 2.55 x 2.36 inches (approx. 9 x 6.5 x 6 cm) |
8. Support and Warranty
For further assistance or warranty information, please refer to the documentation provided with your iKOVWUK laser level or visit the official iKOVWUK brand store.
