Introduction
This manual provides essential instructions for the safe and efficient operation of your Epson Pro EX11000 3-Chip 3LCD Full HD 1080p Wireless Laser Projector. Please read this manual thoroughly before using the product and retain it for future reference.
Product Overview
The Epson Pro EX11000 is a high-performance laser projector designed for clear and vibrant presentations. Key features include:
- Exceptional Brightness: 4,600 lumens of color and white brightness for visibility in various lighting conditions.
- Long-Life Laser Light Source: Up to 20,000 hours of virtually maintenance-free operation with no lamps to replace.
- Full HD 1080p Resolution: Delivers sharp, detailed images up to 300 inches.
- 3-Chip 3LCD Technology: Ensures accurate color reproduction and consistent color brightness.
- Versatile Connectivity: Includes Miracast for screen mirroring, two HDMI ports, and USB power for streaming devices.
- Integrated Audio: Built-in 16W speaker for clear sound.
- Automatic Image Correction: Built-in picture skew sensor automatically corrects vertical keystone.
Figure 1: Front view of the Epson Pro EX11000 projector.
What's in the Box
Verify that all items are present in the packaging:
- Epson Pro EX11000 Projector
- Power Cable
- Projector Remote Control
- Batteries for Remote Control
- Quick Setup Guide
- Carrying Case
Figure 2: Included items: projector, power cable, remote, batteries, Quick Setup Guide, and carrying case.
Setup
Follow these steps to set up your projector:
- Placement: Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the unit. The projector can display images up to 300 inches diagonally.
- Power Connection: Connect the power cable to the projector and then to an electrical outlet.
- Connect Input Devices: Use HDMI cables to connect your computer, streaming device, or other video sources to the projector's HDMI ports.
- Power On: Press the power button on the projector or the remote control to turn on the unit.
- Image Adjustment: Adjust the focus and zoom using the rings on the projector lens. The built-in picture skew sensor will automatically correct vertical keystone. Manual horizontal keystone correction may be performed if needed.
Figure 3: Projector placement for various screen sizes. The projector can display images up to 300 inches.
Operating Instructions
This section covers basic operation of your Epson Pro EX11000 projector.
Power On/Off
- To power on, press the Power button on the projector's control panel or the remote control.
- To power off, press the Power button again. A confirmation message may appear; press the button again to confirm shutdown.
Input Source Selection
Use the Source Search button on the remote control or the projector's control panel to cycle through available input sources (HDMI1, HDMI2, Computer, etc.).
Menu Navigation
Press the Menu button to access the projector's settings. Use the arrow buttons to navigate and the Enter button to select options. Press Menu again to exit.
Figure 4: Overview of projector features and connectivity options.
Connectivity
The Pro EX11000 offers various connectivity options for different devices.
- HDMI Ports (x2): Connect high-definition devices such as laptops, Blu-ray players, game consoles, and streaming devices.
- USB Type-A (PC-free USB, 5V 2A Power Supply): Use for USB power to compatible streaming devices or for PC-free presentations.
- USB Type-B (USB Plug 'n Play): Connect to a computer for direct display output.
- Miracast: Wirelessly mirror content from compatible smartphones, tablets, and laptops.
- Wi-Fi: Built-in Wi-Fi for network connectivity and wireless features.
- Ethernet (RJ-45): For wired network connection, supporting Crestron Connected and Control4.
- Audio In/Out: Multiple audio input options (RCA, 3.5mm Stereo Mini) and a 3.5mm Stereo Mini audio output.
- Computer/Component Video (D-sub 15 pin): Connect older computers or component video sources.
- Composite Video (RCA Yellow): Connect standard definition video sources.
- RS-232C: For serial control of the projector.
Figure 5: Compatibility with various devices and a detailed view of the projector's rear connection panel.
Figure 6: Front controls and rear connectivity ports of the projector.
Maintenance
The Epson Pro EX11000 projector is designed for low maintenance.
- Laser Light Source: The laser light source has an estimated lifespan of up to 20,000 hours and does not require replacement.
- Cleaning: Regularly clean the projector's exterior with a soft, dry cloth. For the lens, use a lens cleaning cloth and solution specifically designed for optical surfaces. Do not use abrasive cleaners or solvents.
- Air Filter: Check and clean the air filter periodically to ensure proper airflow and prevent overheating. Refer to the Quick Setup Guide for instructions on accessing and cleaning the air filter.
Troubleshooting
If you encounter issues with your projector, refer to the following common solutions:
- No Image Displayed:
- Ensure the projector is powered on and the power cable is securely connected.
- Verify that the input source is correctly selected (e.g., HDMI1, HDMI2).
- Check the connection cable between the projector and the source device.
- Image is Blurry or Out of Focus:
- Adjust the focus ring on the projector lens.
- Ensure the projector is at an appropriate distance from the screen.
- No Sound:
- Check the volume settings on both the projector and the source device.
- Ensure audio cables are correctly connected if using external speakers.
- Verify that the audio output from the source device is enabled.
- Image is Distorted or Tilted:
- The projector features automatic vertical keystone correction. If the image is still distorted, manually adjust keystone settings via the projector menu.
- Ensure the projector is placed on a level surface or mounted correctly.
For further assistance, consult the comprehensive user guide available on the Epson support website or contact Epson technical support.
Specifications
| Feature | Specification |
|---|---|
| Model Number | V11HA72220 |
| Display Technology | 3-Chip 3LCD |
| Display Resolution | Full HD 1080p (1920 x 1080) |
| Color Brightness | 4,600 Lumens |
| White Brightness | 4,600 Lumens |
| Light Source | Laser (up to 20,000 hours) |
| Dynamic Contrast Ratio | Up to 100,000:1 |
| Maximum Projected Image Size | 300 inches |
| Connectivity Technology | Ethernet, HDMI (x2), Wi-Fi, USB (Type-A, Type-B), Miracast, RS-232C |
| Special Features | Built-In 16W Speaker, Built-In Wi-Fi, Lightweight, Auto Vertical Keystone Correction |
| Product Dimensions (W x D x H) | 12.8 x 11.8 x 4.1 inches |
| Item Weight | 9.5 pounds |
Warranty and Support
Your Epson Pro EX11000 projector comes with a standard 1-year limited warranty, which includes full-unit replacement. Additionally, free technical phone support is available for the life of the product.
For detailed warranty information, product registration, or to access technical support, please visit the official Epson website or refer to the documentation included with your product.
Important Notes on Video Content
The provided product data did not include specific video URLs with creator information or m3u8 format. Therefore, no official product videos could be embedded in this manual as per the instructions.
