Sauter S7153412 Induction Hob User Manual

1. Introduction

This manual provides essential information for the safe and efficient use of your Sauter S7153412 Induction Hob. Please read these instructions carefully before installation, operation, or maintenance. Keep this manual for future reference.

Figure 1: Overview of the Sauter S7153412 Induction Hob. This image displays the black ceramic glass surface with three distinct circular induction cooking zones. The control panel is located at the bottom center, featuring touch-sensitive buttons for power, timer, and individual zone adjustments, along with a digital display. The Sauter brand logo is visible on the lower left.

2. Safety Information

Always observe the following safety precautions to prevent electric shock, fire, or injury:

• Ensure the appliance is installed by a qualified technician in accordance with local regulations.
• Do not operate the hob if the ceramic surface is cracked or broken. Disconnect from power immediately.
• Use only induction-compatible cookware.
• Do not place metallic objects such as knives, forks, spoons, or lids on the hob surface as they can become hot.
• Keep children away from the appliance during operation and cooling.
• Do not clean the hob with steam cleaners.
• The hob surface remains hot after use. Avoid touching it until it has cooled down.
• Ensure adequate ventilation around the appliance.

3. Setup and Installation

Installation of the Sauter S7153412 Induction Hob must be performed by a qualified electrician or authorized service technician. Incorrect installation can lead to electric shock, fire, or damage to the appliance.

3.1. Unpacking

Carefully remove the hob from its packaging. Inspect for any damage during transit. Retain packaging materials for potential future transport or return.

3.2. Electrical Connection

• The appliance requires a 230V electrical supply.
• Ensure the electrical installation meets local safety standards and regulations.
• The hob must be properly earthed.
• Do not use extension cords or adapters.

3.3. Mounting

The hob is designed for built-in installation. Ensure the countertop opening dimensions are appropriate for the hob's dimensions (75 x 60 cm). Allow sufficient clearance for ventilation beneath the hob as specified in the detailed installation guide provided with the product packaging.

4. Operating Instructions

The Sauter S7153412 Induction Hob features touch controls for intuitive operation.

4.1. Control Panel Overview

The control panel, located at the front of the hob, includes:

• Power On/Off Button: To activate or deactivate the hob.
• Zone Selection Buttons: To select the desired cooking zone.
• Power Level Adjustment (+/-): To increase or decrease the heat setting.
• Booster Function Button: To activate maximum power for rapid heating on selected zones.
• Timer Button: To set a cooking timer.
• Digital Display: Shows power levels, timer settings, and error codes.

4.2. Turning On/Off

1. To turn on: Touch the Power On/Off button. The display will illuminate.
2. To turn off: Touch and hold the Power On/Off button until the display turns off.

4.3. Selecting a Cooking Zone and Adjusting Power

1. Place an induction-compatible pan on the desired cooking zone.
2. Touch the corresponding Zone Selection button.
3. Use the '+' or '-' buttons to adjust the power level from 1 (low) to 9 (high).

4.4. Booster Function

The Booster function provides maximum power to a selected cooking zone for a limited time, ideal for boiling water quickly. To activate:

1. Select the desired cooking zone.
2. Touch the Booster button. The display will show 'P' or 'b' to indicate Booster mode.
3. The Booster function will automatically reduce power after a set period or can be manually deactivated by pressing '-' until the desired power level is reached.

4.5. Timer Function

The timer can be used to set a cooking duration for a specific zone or as a general minute minder.

• Cooking Zone Timer: Select a cooking zone, then touch the Timer button. Use '+' or '-' to set the desired cooking time. The zone will turn off automatically when the time expires.
• Minute Minder: With the hob on but no zone selected, touch the Timer button. Use '+' or '-' to set the desired time. An alarm will sound when the time expires, but the hob will not turn off.

5. Maintenance and Cleaning

Regular cleaning and maintenance ensure the longevity and optimal performance of your induction hob.

5.1. Daily Cleaning

• Always ensure the hob is cool before cleaning.
• Wipe the ceramic surface with a damp cloth and a small amount of mild dish soap.
• Rinse with a clean damp cloth and dry thoroughly with a soft cloth to prevent water spots.

5.2. Removing Stubborn Stains

• For burnt-on food or stubborn stains, use a specialized ceramic hob scraper (plastic or metal, held at a shallow angle) to gently remove residue.
• Apply a ceramic hob cleaner and polish with a soft cloth.
• Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can scratch or damage the surface.

6. Troubleshooting

Before contacting customer service, refer to the following table for common issues and their solutions.

7. Specifications

8. Warranty and Support

For warranty information, please refer to the warranty card included with your product packaging or visit the official Sauter website. For technical support or service inquiries, please contact Sauter customer service directly. Keep your proof of purchase for warranty claims.