ARREGUI CI10-ALRC Remote Control User Manual

Introduction

This manual provides essential information for the proper use and maintenance of your ARREGUI CI10-ALRC Remote Control. This remote control is designed exclusively for use with ARREGUI invisible security locks models CI10P-AL (silver), CI10D-AL (gold), and CI10N-AL (black), which feature an anti-theft alarm. It serves as an additional or replacement remote control for your existing system.

Please read these instructions carefully before operating the device to ensure optimal performance and longevity.

Product Overview

Image: The ARREGUI CI10-ALRC remote control, a compact black device with three oval buttons. The top button features a closed padlock icon, the middle button has an open padlock with 'A', and the bottom button has an open padlock with 'B'.

ARREGUI CI10-ALRC Remote Control in use with invisible lock

Image: A hand holding the ARREGUI CI10-ALRC remote control in the foreground, with the ARREGUI invisible security lock and its strike plate visible in the background. The lock is a metallic, rectangular unit with two bolts extending from one side and a small antenna icon indicating wireless communication.

The ARREGUI CI10-ALRC remote control is a compact, radiofrequency device designed for seamless operation of your ARREGUI invisible security lock. It features three distinct buttons for controlling the lock's functions.

Key Features:

Compatibility: Exclusively designed for ARREGUI invisible security lock models CI10P-AL, CI10D-AL, and CI10N-AL. Not compatible with CI10P, CI10D, CI10N, CI10B-E, CI20B, CI20N, and CI20P models.
Functionality: Operates the invisible security lock, which includes an anti-theft alarm.
Purpose: Can be used as an additional remote or a replacement for a lost or defective one.
Capacity: Up to 16 remote controls can be paired with a single lock unit.
Power: Powered by a standard CR2032 3V lithium button cell battery (included).

Setup and Pairing

Your ARREGUI CI10-ALRC remote control comes with a pre-installed CR2032 battery, making it ready for use. Before operating, ensure it is properly paired with your ARREGUI invisible security lock.

Pairing Instructions:

Prepare the Lock: Ensure your ARREGUI invisible security lock is powered on and in pairing mode. Refer to your lock's specific manual for instructions on entering pairing mode (this usually involves pressing a button on the lock unit).
Activate Remote Pairing: While the lock is in pairing mode, press and hold the designated pairing button on the ARREGUI CI10-ALRC remote control. (Note: The specific button for pairing may vary; typically, it's one of the main function buttons or a small recessed button. Consult the lock's manual for exact remote pairing instructions.)
Confirmation: The lock unit will typically provide an audible beep or a visual indicator (e.g., LED light change) to confirm successful pairing.
Test Functionality: After pairing, test the remote control's functions (locking and unlocking) to ensure it operates correctly with your security lock.

If you are replacing a lost remote or adding an additional one, follow the same pairing procedure. Remember, up to 16 remote controls can be linked to a single lock unit.

Operating the Remote Control

The ARREGUI CI10-ALRC remote control provides simple and intuitive operation for your invisible security lock.

Button Functions:

Top Button (Closed Padlock Icon): Typically used to lock the security door. Press this button to engage the lock bolts.
Middle Button (Open Padlock with 'A'): Typically used to unlock the security door. Press this button to retract the lock bolts.
Bottom Button (Open Padlock with 'B'): This button may serve as an emergency unlock or a secondary function, depending on your specific lock model's configuration. Refer to your lock's manual for its exact purpose. For some models, it might activate a silent alarm or a different unlocking sequence.

Ensure you are within the effective range of the invisible security lock when operating the remote control. Obstructions and signal interference may affect performance.

Maintenance

To ensure the longevity and reliable operation of your ARREGUI CI10-ALRC remote control, follow these maintenance guidelines:

Battery Replacement:

The remote control is powered by a CR2032 3V lithium button cell battery. When the remote's range decreases or it becomes unresponsive, it's likely time to replace the battery.

Locate Battery Compartment: The battery compartment is usually on the back or side of the remote control, often secured by a small screw or a snap-on cover.
Open Compartment: Use a small screwdriver or a thin tool to carefully open the battery compartment.
Remove Old Battery: Gently remove the old CR2032 battery. Note its orientation (positive (+) side up or down).
Insert New Battery: Insert a new CR2032 3V lithium battery, ensuring the correct polarity.
Close Compartment: Securely close the battery compartment.
Test: Test the remote control with your lock to confirm functionality.

Dispose of old batteries responsibly according to local regulations.

Cleaning:

Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.

Storage:

Store the remote control in a dry place, away from extreme temperatures and direct sunlight, when not in use for extended periods.

Troubleshooting

If you encounter issues with your ARREGUI CI10-ALRC remote control, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
Remote not responding to lock.	Low or dead battery. Out of range. Remote not paired or pairing lost. Interference.	Replace the CR2032 battery. Move closer to the lock unit. Re-pair the remote control with the lock (refer to "Setup and Pairing" section). Move away from potential sources of radio interference (e.g., large metal objects, other wireless devices).
Reduced operating range.	Weak battery. Environmental interference.	Replace the CR2032 battery. Ensure clear line of sight if possible, or reduce interference.
Remote buttons feel sticky or unresponsive.	Dirt or debris under buttons. Physical damage.	Clean the remote control with a soft, dry cloth. Avoid liquids. If physically damaged, replacement may be necessary.

If the problem persists after attempting these solutions, please contact ARREGUI customer support or consult a qualified technician.

Specifications

Model Number	CI10-ALRC
Brand	ARREGUI
Dimensions (L x W x H)	6 x 3.5 x 1 cm (2.36 x 1.38 x 0.39 inches)
Weight	20 grams (0.71 ounces)
Material	Metal
Battery Type	1 x CR2032 3V Lithium Button Cell (included)
Controller Type	Radiofrequency
Special Feature	Alarm (via compatible lock)
Compatible Lock Models	ARREGUI CI10P-AL, CI10D-AL, CI10N-AL

Warranty and Support

For information regarding the warranty of your ARREGUI CI10-ALRC remote control, please refer to the warranty documentation provided with your original ARREGUI invisible security lock or visit the official ARREGUI website. Warranty terms typically cover manufacturing defects.

For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact ARREGUI customer service. Contact details can usually be found on the product packaging or the official ARREGUI website.

Please have your product model number (CI10-ALRC) and purchase information ready when contacting support.