Cadmos 202DYNAMIC Loud Alarm Clock with RGB Night Light User Manual

1. Product Overview

The Cadmos 202DYNAMIC Loud Alarm Clock is designed to provide reliable timekeeping and customizable lighting options. Featuring a vibrant RGB display and night light, dual alarms, and intelligent voice control, this clock is suitable for various room settings.

Key Features:

• Loud Dual Alarm Clocks and Weekday Modes: Features an extra loud buzzer (up to 95 dB), a five-minute ring, and a five-minute snooze. Choose between Monday-Friday or Monday-Sunday alarm modes.
• 8 Colors RGB Digital Display: Dynamic RGB color changing display with 4 regular colors and 4 dynamic RGB color modes. Adjustable brightness from 10% to 100%.
• Dynamic RGB Night Light: Dimmable night light with 5 regular colors and 2 dynamic RGB colors. Adjustable brightness from 10% to 100% with a one-key switch.
• Brightness Dimmer: Both the RGB display and night light can be adjusted from 10% to 100% brightness.
• Intelligent Voice Control: Built-in sound sensor activates the alarm with voice or touch above 60 dB in a short distance. The screen and night light automatically turn off after 6 seconds of inactivity.
• Alarm Clock with USB Charger: Includes a USB charger port supporting DC 5V/1A output for convenient charging of electronic devices.
• Outlet Powered and Battery Backup: Powered by an AC power adapter (included) with memory backup to retain time and alarm settings during power outages.

2. What's in the Box

Upon unboxing your Cadmos 202DYNAMIC Alarm Clock, you should find the following items:

• Cadmos 202DYNAMIC Alarm Clock (Light Pink)
• USB Charging Cable (approximately 47 inches long)
• USB Power Adapter
• 1 CR2032 Battery (pre-installed for backup)

Image: The Cadmos 202DYNAMIC Alarm Clock shown with its included 47-inch USB cable and USB power adapter.

3. Setup

Powering On:

1. Connect the provided USB charging cable to the Micro USB port on the back of the alarm clock.
2. Plug the USB cable into the USB power adapter.
3. Insert the USB power adapter into a standard electrical outlet. The clock display will illuminate.

The clock is designed to be outlet powered. A pre-installed CR2032 battery provides memory backup to retain time and alarm settings during power outages.

Image: Rear view of the alarm clock, detailing the various control buttons, USB charging port, and power input.

Setting the Time:

1. Press and hold the TIME SET button on the back of the clock until the display starts flashing.
2. Use the UP and DOWN buttons to adjust the year, month, date, hour, and minutes. Press TIME SET again to confirm each setting and move to the next.
3. To switch between 12-hour and 24-hour time format, simply press the 12/24H button (located above TIME SET) once while in normal time display mode.

Image: The alarm clock displaying the time, day, month, and date, with a colorful RGB border.

4. Operating Instructions

Setting Alarms:

1. Press and hold the ALARM SET button on the back until the alarm time display starts flashing.
2. Use the UP and DOWN buttons to set the desired alarm hour and minutes. Press ALARM SET again to confirm each setting.
3. To activate/deactivate Alarm 1 or Alarm 2, press the corresponding alarm button (bell icons) on the top of the clock. A bell icon will appear on the display when an alarm is active.
4. To set a weekday-only alarm (Monday-Friday), press the WEEKEND button on the back. The display will show "5 DAY" when this mode is active. Press again for all 7 days.

Image: The alarm clock displaying two alarm times (07:30 and 09:00) and options for weekday or every day alarms.

Adjusting Display and Night Light:

• Display Brightness: Use the slider on the right side of the back panel to adjust the digital display brightness from 10% to 100%.
• Night Light Brightness: Use the slider on the left side of the back panel to adjust the night light brightness from 10% to 100%.
• Display Color: Press the right side of the SNOOZE bar on top to cycle through 8 RGB digital display colors (4 regular, 4 dynamic).
• Night Light Color: Press the left side of the SNOOZE bar on top to cycle through 7 RGB night light colors (5 regular, 2 dynamic).

Image: A collage of the alarm clock displaying different RGB colors for the digital time and the surrounding night light, along with a brightness dimmer scale.

Intelligent Voice Control:

The clock features an intelligent voice control function. To activate it, slide the switch labeled with a sound wave and light icon on the back panel to the 'on' position.

• When activated, the screen and night light will turn on in response to sounds above 60 dB (e.g., clapping, talking) or by tapping the clock.
• The display and night light will automatically turn off after 6 seconds of silence or inactivity to save power.

Image: The alarm clock displaying the time with an active voice control icon, indicating the feature is enabled.

Snooze Function:

When an alarm sounds, press the large SNOOZE bar on the top of the clock to activate the snooze function. The alarm will pause for 5 minutes and then sound again.

Image: A person's hand reaching to press the snooze button on the top of the alarm clock, which is placed on a bedside table.

5. Maintenance

Cleaning:

To clean your alarm clock, gently wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents that may damage the finish.

Battery Backup:

The alarm clock uses 1 CR2032 battery for memory backup. This battery is included and pre-installed. If the clock loses its time settings after a power outage, the backup battery may need to be replaced.

6. Troubleshooting

• Clock display is off or flickering: Ensure the AC power adapter is securely plugged into both the clock and the wall outlet. Check the power source. If the display flickers, the power connection might be unstable.
• Alarm does not sound: Verify that the alarm is activated (bell icon visible on display) and the alarm time is correctly set. Check the volume settings.
• Voice control not responding: Make sure the voice control switch on the back is in the 'on' position. Ensure there is sufficient sound (above 60 dB) or a tap to activate the display.
• Time settings are lost after power outage: The CR2032 backup battery may need to be replaced.

7. Specifications

8. Warranty and Support

Warranty:

This product comes with a Limited Warranty. Please refer to the product packaging or contact the manufacturer for specific warranty terms and conditions.

Customer Support:

For any questions, technical assistance, or warranty claims, please contact Cadmos customer support through the retailer's platform or the official Cadmos website.

9. Product Videos