1. Introduction
This manual provides essential information for the safe and efficient operation of your Greenworks Pro 60V 3A Standard Charger. This charger is designed to work with all Greenworks Pro 60V lithium-ion batteries, providing reliable power for your cordless outdoor power equipment. Please read and understand all instructions before using the charger.
2. Safety Information
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using electrical products. Keep this manual for future reference.
General Safety Rules
- Read all instructions before using the battery charger.
- Do not charge batteries in damp or wet locations. Do not expose to rain.
- Use only Greenworks 60V batteries with this charger. Other batteries may burst, causing personal injury and damage.
- Do not operate the charger if it has received a sharp blow, been dropped, or otherwise damaged. Take it to an authorized service center.
- Do not disassemble the charger. Incorrect reassembly may result in a risk of electric shock or fire.
- Unplug the charger from the outlet before attempting any maintenance or cleaning.
- Do not use the charger in the presence of flammable liquids or gases.
- Keep the charger away from children.
3. Product Overview
The Greenworks Pro 60V 3A Standard Charger features a robust design for efficient and safe battery charging. It includes a diagnostic LED indicator to display the charging status and any potential issues.
Figure 1: Greenworks Pro 60V 3A Standard Charger. This image shows the top-down view of the charger, highlighting its bright green color and the battery slot.
Key Features:
- Diagnostic LED Indicator: Displays current charge level and any battery issues.
- Built-in Air Vent: Allows for faster charge time and reduces heat while charging.
- Compatibility: Designed for use with all Greenworks Pro 60V batteries.
Figure 2: Close-up of the diagnostic LED indicator on the charger. The indicator lights provide visual feedback on the battery's status.
4. Setup
Before first use, ensure the charger is placed on a stable, flat surface in a well-ventilated area, away from direct sunlight and moisture.
Connecting the Charger
- Plug the charger into a standard 120V AC electrical outlet.
- The power indicator light on the charger will illuminate, indicating it is ready for use.
5. Operating Instructions
Follow these steps to charge your Greenworks Pro 60V lithium-ion battery.
Charging a Battery
- Ensure the charger is plugged into a power outlet.
- Align the battery pack with the charger's slot and slide it in until it clicks securely into place.
- The diagnostic LED indicator on the charger will show the charging status.
- Once the battery is fully charged, the indicator will show a solid green light.
- To remove the battery, press the release latch on the battery pack and slide it out of the charger.
Figure 3: A user demonstrating how to properly insert a Greenworks 60V battery into the charger.
LED Indicator Status
| Indicator Light | Status |
|---|---|
| Solid Green (Power) | Charger is plugged in and ready. |
| Flashing Green (Charging) | Battery is currently charging. |
| Solid Green (Charging) | Battery is fully charged. |
| Flashing Red | Battery or charger error (e.g., overheating, faulty battery). |
Approximate Charge Times
The charge time varies depending on the battery's amp-hour (Ah) rating. The built-in air vent helps to optimize charging speed and prevent overheating.
Figure 4: Chart showing approximate recharge times for various Greenworks 60V batteries with the 3A charger.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your charger.
Cleaning and Storage
- Keep the charger clean and free from debris. Use a dry cloth to wipe the exterior.
- Do not immerse the charger in water or any other liquid.
- Store the charger in a cool, dry place when not in use.
- Ensure the battery is removed from the charger before storage.
7. Troubleshooting
If your charger is not functioning as expected, refer to the table below for common issues and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger not working (no lights) | No power to the outlet. | Check the power outlet with another appliance. |
| Battery not charging (flashing red light) | Battery or charger is too hot/cold. | Move the battery and charger to a room temperature environment (68°F / 20°C) and allow them to cool down or warm up. |
| Battery not charging (flashing red light) | Faulty battery pack. | Try charging a different Greenworks 60V battery. If the issue persists, the battery may be faulty. |
| Battery not charging (flashing red light) | Faulty charger. | Try charging a known good Greenworks 60V battery. If the issue persists, the charger may be faulty. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Greenworks |
| Model Number | 2936902 |
| Power Source | Battery Powered |
| Material | Metal, Plastic |
| Color | Green |
| Style | 60V 3A Charger |
| Item Weight | 0.72 Kilograms (1.58 pounds) |
| Operation Mode | Automatic |
| Product Dimensions | 7.36"D x 2.52"W x 6.3"H |
| Assembly Required | No |
| UPC | 841821050658 |
9. Warranty and Support
Your Greenworks Pro 60V 3A Standard Charger is covered by a 4-year tool warranty. For warranty claims, technical support, or replacement parts, please contact Greenworks customer service.
Contact Information
- Visit the official Greenworks website: Greenworks Store
- Refer to the product packaging for specific customer service phone numbers or email addresses.
10. Related Product Information
The Greenworks Pro 60V system offers a wide range of compatible tools. Below is a video showcasing the Greenworks Pro 60V Cordless Tool Family, demonstrating the versatility of the battery system this charger supports.
Video 1: Overview of the Greenworks Pro 60V Cordless Tool Family. This video highlights various tools that utilize the 60V battery system, emphasizing the ecosystem supported by your charger.
