Introduction
This manual provides essential instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT Comhar 55-inch Electric Standing Desk. Please read this manual thoroughly before use to ensure proper function and safety.
The FLEXISPOT Comhar 55-inch Electric Standing Desk, showcasing its spacious desktop, integrated drawer, and control panel.
Safety Information
- Do not exceed the desk's maximum weight capacity of 154 lbs (70 kg).
- Exercise caution during assembly and operation. Keep hands and objects clear of moving parts.
- Ensure the desk is placed on a level surface.
- Keep children and pets away from the desk during operation. Utilize the child lock feature when not in use.
- Do not attempt to modify the desk's structure or electrical components.
Setup
The FLEXISPOT Comhar desk features an innovative quick-install design, significantly simplifying the assembly process. A factory-installed crossbeam reduces setup time, allowing for completion in approximately 5 minutes.
Assembly Steps:
- Unpack all components and verify against the included parts list.
- Place the desktop upside down on a soft, clean surface to prevent scratches.
- Attach the desk legs to the pre-installed crossbeam and desktop using the provided hardware.
- Connect all necessary cables according to the diagram in the separate quick start guide.
- Carefully flip the desk upright with assistance and position it in your desired location.
Operating Instructions
Height Adjustment
The desk's electric motor allows for smooth height adjustments. Use the up and down arrow buttons on the control panel to move the desk to your desired height. The height can be adjusted from 28.7 inches to 48 inches.
The desk offers a wide height adjustment range, allowing users to easily switch between sitting and standing positions.
Memory Presets
The control panel includes four programmable height presets. To save a height:
- Adjust the desk to your desired height.
- Press the 'M' button (or similar memory set button, refer to quick start guide).
- Press one of the numbered preset buttons (1, 2, 3, or 4) until you hear a beep or see the display confirm.
To recall a saved height, simply press the corresponding numbered preset button.
Child Lock
Activate the child lock feature to prevent accidental height adjustments. Locate the child lock button on the control panel and press it to engage or disengage the lock.
Integrated USB Charging Ports
The desk is equipped with integrated USB-A and USB-C ports for convenient charging of mobile devices. Note that these ports may temporarily pause charging while the desk height is being adjusted. Laptop charging is not supported through these ports.
The control panel features a digital display, height adjustment buttons, four programmable memory presets, a child lock, and integrated USB-A and USB-C charging ports.
Storage Drawer
A pull-out drawer is integrated into the desktop, providing discreet storage for small office supplies and personal items. Gently pull the drawer to open and push to close.
The convenient pull-out drawer provides integrated storage for office essentials, keeping your workspace organized.
Anti-Collision Feature
The desk is equipped with an anti-collision system. If the desk encounters an obstacle during height adjustment, it will automatically stop and reverse slightly to prevent damage or injury.
The anti-collision system automatically detects obstacles during height adjustment, stopping and reversing to prevent damage or injury.
Maintenance
- Regularly wipe the desktop and frame with a soft, damp cloth. Avoid abrasive cleaners.
- Check all screws and connections periodically to ensure they are secure.
- Keep the motor and electrical components free from dust and moisture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move or respond to controls. | Power cable disconnected; Child lock engaged; Motor overload; Control panel malfunction. | Check power connection. Disengage child lock. Unplug desk for 10 minutes, then plug back in. Reduce weight on desk. If problem persists, contact support. |
| USB ports not charging. | Desk is adjusting height; Device not compatible; Cable issue. | Wait for desk movement to complete. Ensure device is compatible with USB charging. Try a different USB cable. Note: Laptop charging is not supported. |
| Desk makes unusual noises. | Loose components; Obstruction. | Check all screws and ensure they are tightened. Inspect for any obstructions under or around the desk. |
Specifications
Detailed dimensions of the desk, illustrating the desktop size and the adjustable height range from 28.9 inches to 46.5 inches.
| Feature | Detail |
|---|---|
| Brand | FLEXISPOT |
| Model Name | Standing Desk (Comhar) |
| Model Number | B0C2Y3645L |
| Color | White |
| Product Dimensions (D x W x H) | 23.8" x 47.3" x 47.6" (Overall) |
| Desktop Size | 55" x 28" (approximate working surface) |
| Height Adjustment Range | 28.7" to 48" (including 2.6" tabletop thickness) |
| Maximum Weight Capacity | 154 Pounds (70 kg) |
| Item Weight | 113 Pounds (51.3 kg) |
| Desktop Material | Wood |
| Base Material | Metal (Alloy Steel) |
| Special Features | Electric Height Adjustment, Integrated Drawer, USB-A & USB-C Charging Ports, 4 Memory Presets, Child Lock, Anti-Collision System |
| Assembly Required | Yes (Quick Assembly) |
| Included Components | Built-in USB Port, All Assembly Tools |
Warranty
This FLEXISPOT Comhar Electric Standing Desk comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official FLEXISPOT website.
Support
If you encounter any issues or have questions regarding your FLEXISPOT Comhar Electric Standing Desk that are not addressed in this manual, please contact FLEXISPOT customer support. Contact information can typically be found on the manufacturer's website or on the product packaging.
