1. Product Overview
The Steelcase FR433 Lock Core Kit is designed as a replacement lock core for various Steelcase office furniture. This kit provides a secure locking mechanism, ensuring the privacy and security of your furniture contents. Each kit includes one FR433 lock core and two matching FR433 keys, all featuring a durable chrome finish.
This image displays a typical lock core and two keys. While the keys in this specific image are stamped 'FR305', the product provided is the FR433 lock core kit, which includes a chrome-finished lock core and two keys specifically cut for the FR433 code.
2. Setup and Installation
Installation of the FR433 lock core requires a specific control key for your Steelcase lock series. This control key is essential for both removing existing lock cores and inserting new ones. Ensure you have the correct control key before proceeding with installation.
Required Tools:
- Steelcase Control Key (specific to your lock series)
- New FR433 Lock Core Kit
Installation Steps:
- Prepare the Furniture: Ensure the furniture drawer or door where the lock core will be installed is open and accessible.
- Remove Existing Lock Core (if applicable):
- Insert the appropriate Steelcase control key into the existing lock core.
- Turn the control key to the designated removal position (usually 90 degrees clockwise or counter-clockwise, consult your furniture's manual if unsure).
- Gently pull the control key and the old lock core out of the furniture.
- Insert New FR433 Lock Core:
- Insert the Steelcase control key into the new FR433 lock core.
- Align the new lock core with the opening in the furniture. The keyway on the lock core should match the orientation of the opening.
- Gently push the lock core into the opening until it is fully seated.
- Turn the control key back to the original position (usually 90 degrees counter-clockwise or clockwise) to secure the lock core in place.
- Remove the control key. The lock core should now be firmly installed.
- Test Functionality: Insert one of the new FR433 keys into the installed lock core and test its locking and unlocking mechanism to ensure proper operation.
3. Operating Instructions
Operating the Steelcase FR433 lock core is straightforward:
- To Lock: Insert one of the provided FR433 keys into the lock core. Turn the key clockwise until the locking mechanism engages. Remove the key.
- To Unlock: Insert one of the provided FR433 keys into the lock core. Turn the key counter-clockwise until the locking mechanism disengages. Remove the key.
Always ensure the key is fully inserted before turning to prevent damage to the key or the lock core.
4. Maintenance
Proper maintenance can extend the lifespan and ensure smooth operation of your FR433 lock core:
- Cleaning: Periodically wipe the exterior of the lock core and keys with a soft, dry cloth to remove dust and grime. Avoid using abrasive cleaners or harsh chemicals, as these can damage the chrome finish.
- Lubrication: If the lock mechanism feels stiff or difficult to turn, apply a small amount of graphite lubricant or a silicone-based spray lubricant into the keyway. Avoid using oil-based lubricants, as they can attract dust and debris.
- Key Care: Do not use excessive force when inserting or turning the key. Avoid bending or damaging the keys. Store spare keys in a safe, accessible location.
5. Troubleshooting
If you encounter issues with your FR433 lock core, consider the following troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Key does not insert fully or turn. | Obstruction in keyway, bent key, incorrect key. | Check for debris in the keyway. Ensure the key is not bent. Verify you are using an FR433 key. Apply lubricant if stiff. |
| Lock core cannot be removed or inserted. | Incorrect control key, lock core not aligned, mechanism jammed. | Ensure you are using the correct Steelcase control key for your furniture series. Verify the lock core is properly aligned. Do not force. |
| Lock feels loose after installation. | Lock core not fully seated or secured. | Re-insert the control key and ensure the lock core is pushed in completely and the control key is turned to the securing position before removal. |
If problems persist after attempting these solutions, please contact customer support.
6. Specifications
- Model Number: FR433
- Material: Metal
- Color: Chrome
- Finish Type: Chrome finish
- Recommended Uses: Office Furniture
- Kit Contents: 1 Lock Core, 2 Matching Keys
- Manufacturer: Steelcase
7. Warranty and Support
For information regarding warranty coverage for your Steelcase FR433 Lock Core Kit, please refer to the terms and conditions provided by your original point of purchase or the seller, EasyKeys Inc. USA.
If you require technical assistance, have questions about installation, or need to report a defect, please contact the seller directly. They can provide specific guidance and support related to your purchase.
Seller: EasyKeys Inc. USA
For general information about Steelcase products, you may visit the official Steelcase website.
