WORKPRO W125235

WORKPRO 3.6V Cordless Hot Glue Gun User Manual

Model: W125235

Introduction

Thank you for choosing the WORKPRO 3.6V Cordless Hot Glue Gun. This energy-saving, rechargeable glue gun kit is designed for various crafting and DIY projects, offering fast heating and a lightweight design for ease of use. It comes with 20 mini glue sticks and features an automatic safety power-off function. Please read this manual thoroughly before operation to ensure safe and efficient use of your new tool.

Safety Information

Always keep the glue gun away from children.
Do not touch the nozzle or melted glue as they can reach high temperatures and cause burns.
Use only glue sticks of the specified diameter (0.27" Dia) to prevent damage or malfunction.
Ensure the work area is well-ventilated.
Do not leave the hot glue gun unattended when it is powered on.
Unplug or power off the glue gun when not in use or before performing any maintenance.
Do not pull out the melting glue stick from the glue gun after work is finished; keep it inside for next use.
Allow the equipment to cool down completely before packing it away.
This glue gun is made of flame-retardant materials and includes an 8-minute automatic safety power-off function for enhanced safety.

Package Contents

Please check the package contents to ensure all items are present and undamaged:

1 x WORKPRO 3.6V Cordless Hot Glue Gun
20 x Mini Glue Sticks (0.27" Dia)
1 x Type-C Charging Cable
1 x User Manual (this document)

WORKPRO Cordless Hot Glue Gun and included accessories — Image: The WORKPRO Cordless Hot Glue Gun shown with its included accessories, including the Type-C charging cable and a bundle of 20 mini glue sticks.

Product Overview

Familiarize yourself with the components of your WORKPRO Cordless Hot Glue Gun:

Diagram of WORKPRO Cordless Hot Glue Gun with labeled parts — Image: A detailed diagram of the WORKPRO Cordless Hot Glue Gun, highlighting key components such as the nozzle, ON/OFF switch, glue stick entry, LED indicator, trigger lever, Type-C cable, retractable stand-up base, and Type-C charging port.

Nozzle: Dispenses melted glue.
ON/OFF Switch: Powers the device on and off.
Glue Stick Entry: Where glue sticks are inserted.
LED Indicator: Displays heating status (red for heating, green for ready) and charging status (red for charging, green for charged).
Trigger Lever: Activates glue dispensing.
Type-C Charging Port: For connecting the charging cable.
Retractable Stand-up Base: Provides stability when the gun is not in use.

Setup

Charging the Glue Gun

The WORKPRO hot glue gun is equipped with a 2500mAh rechargeable lithium battery. Before first use, or when the battery is low, charge the device:

Locate the Type-C charging port on the glue gun.
Connect the provided Type-C charging cable to the glue gun and to a 5V 1A power source (e.g., power bank, computer USB socket, car USB socket, or a USB wall adapter).
The LED indicator will show red while charging and turn green when fully charged.

WORKPRO Cordless Hot Glue Gun charging via USB-C — Image: The WORKPRO Cordless Hot Glue Gun connected via its Type-C cable to a laptop for charging, demonstrating its USB rechargeable capability. The LED indicator shows the charging status.

Operating Instructions

Follow these steps to operate your hot glue gun:

Insert Glue Stick: Insert a mini glue stick (0.27" diameter) into the back opening of the glue gun until it stops.
Power On: Press and hold the ON/OFF switch for 3 seconds. The LED indicator will light up red, indicating that the gun is heating.
Preheat: Allow the glue gun to preheat for approximately 90 seconds. The LED indicator will change from red to green when it is ready for use.
Apply Glue: Once the LED is green, gently pull the trigger lever to dispense melted glue onto your desired surface.
Automatic Shut-off: The glue gun is equipped with an 8-minute automatic safety power-off function. If left idle for 8 minutes, it will automatically power off to conserve battery and enhance safety.

WORKPRO Cordless Hot Glue Gun heating up with red LED indicator — Image: The WORKPRO Cordless Hot Glue Gun with its red LED indicator illuminated, signifying that it is in the process of heating up. A timer on the image shows "90S" for the fast preheating time.

Four-step instruction guide for using the WORKPRO Cordless Hot Glue Gun — Image: A visual guide demonstrating the four main steps of using the glue gun: 1) Inserting the glue stick, 2) Pressing the ON/OFF switch, 3) Waiting for the LED to turn green after 90 seconds of preheating, and 4) Pulling the trigger to dispense glue.

Important Notes:

Do not pull out the melting glue stick from the glue gun after work is finished; keep it inside for next use.
Switch the equipment off and allow it to cool down completely before you pack it away.
The glue gun features a less-drip nozzle design to reduce glue spillage and keep your work area clean.

Comparison of glue output from WORKPRO glue gun versus ordinary glue gun — Image: A side-by-side comparison illustrating the superior glue output and clarity of the WORKPRO glue gun (left) compared to an ordinary glue gun (right). The WORKPRO gun shows a consistent, clear glue flow at 0.14 oz/minute, while the ordinary gun shows a less controlled, drippy output at 0.07 oz/minute.

Maintenance

Cleaning: Ensure the glue gun is completely cool before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use abrasive cleaners or solvents.
Nozzle Care: Do not attempt to clean the nozzle while the gun is hot. Any hardened glue around the nozzle can be carefully removed once the gun is cold.
Storage: Store the glue gun in a cool, dry place, away from direct sunlight and out of reach of children. Ensure no glue stick is left partially melted in the chamber if storing for an extended period.
Battery Care: For optimal battery life, avoid fully discharging the battery frequently. Charge it regularly, even if not in constant use.

Troubleshooting

Problem	Possible Cause	Solution
Glue gun does not heat up.	Battery is low or dead. Power switch not pressed correctly.	Charge the glue gun fully. Press and hold the ON/OFF switch for 3 seconds until the LED lights up.
No glue dispenses when trigger is pulled.	Glue gun not hot enough. Glue stick not fully inserted or jammed.	Wait for the LED indicator to turn green. Ensure glue stick is fully inserted. Do not force it.
Glue drips excessively from nozzle.	Normal during heating/cooling. Incorrect glue stick size.	Place the gun on its stand. Use only 0.27" diameter glue sticks.
LED indicator remains red.	Still heating up. Charging in progress.	Wait for approximately 90 seconds for it to turn green. Wait for charging to complete (LED turns green).

Specifications

Feature	Detail
Brand	WORKPRO
Model Number	W125235
Power Source	Battery Powered (Lithium Ion)
Voltage	3.6 Volts
Wattage	9 watts
Battery Capacity	2500mAh
Charging Input	5V 1A (Type-C)
Preheat Time	Approx. 90 seconds
Glue Output Speed	0.14 oz/min
Compatible Glue Stick Diameter	0.27 inches (Mini Sticks)
Automatic Shut-off	8 minutes of inactivity
Item Weight	1.1 pounds
Package Dimensions	8.11 x 7.52 x 2.13 inches
Country of Origin	China
Compatible Material	Wood, Ceramic, Metal, Stone

Warranty and Support

For warranty information and customer support, please refer to the product packaging or contact WORKPRO customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the official WORKPRO store on Amazon: WORKPRO Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.