Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your MYITYARD Wall Mount Cup Dispenser. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
Product Features
- Versatile Mounting: Designed for wall or water cooler side mounting.
- Cup Compatibility: Fits 4-7 oz disposable paper and plastic cups (diameter range 1.9-2.9 inches).
- Capacity: Holds up to 40 cups.
- Single-Cup Dispensing: Features a metal gripper mechanism to dispense one cup at a time.
- Dust-Proof Design: Includes a lid to protect cups from moisture and dust.
- Durable Construction: Made from sturdy, harmful substance-free plastic.
- Easy Monitoring: Crystal-clear T-shaped front window allows for easy monitoring of cup quantity.
- Dual Installation Options: Comes with strong adhesive for smooth surfaces and screws for rough walls.
Setup and Installation
The MYITYARD Cup Dispenser offers two installation methods: adhesive mounting for smooth surfaces and screw mounting for rougher surfaces. Both methods ensure a secure attachment.
Method 1: Adhesive Mounting (for smooth surfaces)
- Clean the desired installation surface thoroughly to ensure it is free of dust, grease, and moisture.
- Peel off the protective backing from the self-adhesive board provided.
- Press the adhesive board firmly onto the cleaned surface, holding for at least 30 seconds to ensure strong adhesion.
- Align the cup dispenser with the mounted adhesive board and slide it downwards until it locks securely into place.
Figure 1: Illustration of the two available installation methods.
Figure 2: Preparing the self-adhesive board for mounting.
Method 2: Screw Mounting (for rougher surfaces)
- Position the screw plate on the desired installation surface.
- Mark the screw hole locations using a pencil.
- Drill pilot holes at the marked locations (if necessary for your wall type).
- Secure the screw plate to the wall using the provided screws.
- Align the cup dispenser with the mounted screw plate and slide it downwards until it locks securely into place.
Figure 3: Installing the screw plate for secure mounting.
Figure 4: The cup dispenser installed on a water cooler, highlighting its compact size.
Figure 5: Example placement of the cup dispenser next to a coffee machine.
Figure 6: The cup dispenser installed in a bathroom setting.
Operating Instructions
Loading Cups
- Open the flip-top lid located at the top of the dispenser.
- Insert a stack of 4-7 oz disposable paper or plastic cups into the dispenser. Ensure the cups are not "squeeze stacked" as this can lead to multiple cups dispensing at once. Use naturally stacked cups.
- Close the lid securely to protect the cups from dust and moisture.
Figure 7: Cup size compatibility and the internal metal gripper.
Figure 8: Proper technique for dispensing a single cup.
Dispensing Cups
- To dispense a single cup, gently pinch the bottom edge of the cup and slowly rotate it while pulling downwards.
- Avoid pinching the cup too firmly or pulling quickly, as this may cause multiple cups to dispense.
Video 1: Demonstrates how to load cups into the dispenser and dispense them one by one.
Video 2: Shows the process of refilling the cup dispenser and its secure attachment.
Maintenance
- Regularly wipe the exterior of the dispenser with a soft, damp cloth to remove dust and smudges.
- Ensure the lid is always closed when not loading cups to prevent dust and moisture from entering.
- Periodically check the metal gripper for any debris that might hinder smooth dispensing. Clean if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Multiple cups dispense at once. |
|
|
| Cups do not dispense smoothly. |
|
|
| Dispenser detaches from the wall. |
|
|
Specifications
- Product Dimensions: 3.74" L x 3.74" W x 10.8" H
- Item Weight: 12 ounces
- Material: Durable Plastic
- Color: Black
- Cup Compatibility: 4-7 oz disposable paper and plastic cups
- Cup Caliber Range: 1.9-2.9 inches (5-7.5 cm)
- Included Components: Cup Dispenser, Adhesive Board, Screw Plate, Screws
- Assembly Required: No
- Batteries Required: No
Warranty Information
The MYITYARD Cup Dispenser comes with a 90-day warranty. If the product is damaged within 90 days from the date of purchase, it will be replaced free of charge.
Support
For further assistance or inquiries, please contact MYITYARD customer support through the retailer where the product was purchased or visit the official MYITYARD store online.
You can visit the MYITYARD Store at: MYITYARD Store
