Electro-Voice EVERSE 8 Loudspeaker & Gator Cases Tote Bag User Manual

Introduction

The Electro-Voice EVERSE 8 is a portable, battery-powered 8-inch 2-way loudspeaker designed for a wide range of audio applications, including live music, vocal reinforcement, and audio playback. It features Bluetooth connectivity, automatic feedback suppression, and music ducking. This product bundle also includes a Gator Cases Heavy-Duty Speaker Tote Bag, providing convenient and protected transport for your EVERSE 8 loudspeaker. This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your new equipment.

Image: Electro-Voice EVERSE 8 Loudspeaker shown alongside the Gator Cases Heavy-Duty Speaker Tote Bag.

Setup

1. Unpacking and Inspection

• Carefully remove all components from the packaging.
• Inspect the loudspeaker and tote bag for any signs of damage during transit.
• Retain the original packaging for future storage or transport.

2. Loudspeaker Placement

• The EVERSE 8 can be placed on a flat, stable surface using its built-in feet with no-skid rubber pads.
• For extended sound throw, mount the loudspeaker on a standard tripod speaker stand.
• It can also be used as a stage monitor by placing it long-side down at a 55° monitor angle.
• For upward projection, use the 30° kick-back angle.

Image: Angled view of the Electro-Voice EVERSE 8 loudspeaker, highlighting its compact design.

Image: Front view of the Electro-Voice EVERSE 8 loudspeaker, showing the speaker grille and logo.

3. Battery Installation and Charging

• The EVERSE 8 is powered by a custom-designed high-capacity Li-ion battery pack.
• To install or remove the battery pack, use the tool-free screws.
• Connect the loudspeaker to an AC power source using the provided power cable to charge the battery. The battery is fully optimized for audio use and includes protection circuitry.

4. Tote Bag Usage

• The Gator Cases GPA-TOTE-08 is designed for compact 8" speaker cabinets.
• Unzip the heavy-duty dual zipper to open the entire top of the bag for easy loading and unloading of the EVERSE 8 loudspeaker.
• Utilize the secure-wrap, reinforced dual handles and straps for comfortable carrying and weight distribution.
• Store cables and accessories in the large front pocket.

Image: Angled view of the Gator Cases Heavy-Duty Speaker Tote Bag, showing its robust construction and front pocket.

Image: Front view of the Gator Cases Heavy-Duty Speaker Tote Bag, highlighting the Gator Cases logo and zipper design.

Operating Instructions

1. Powering On/Off

• Locate the power switch on the rear panel of the EVERSE 8.
• Toggle the switch to the 'ON' position to power on the unit.
• Toggle to 'OFF' to power down.

Image: Rear panel of the Electro-Voice EVERSE 8 loudspeaker, showing inputs, controls, and power switch.

2. Audio Input and Mixing

• The EVERSE 8 features a built-in four-channel digital mixer.
• Connect microphones or instruments to the input jacks (Input 1, Input 2, Input 3/4).
• Adjust input levels using the corresponding controls on the rear panel or via the QuickSmart Mobile app.
• The mixer includes studio-quality effects and processing, 48 V phantom power for condenser microphones, and feedback suppression.

3. Bluetooth Connectivity

• Enable Bluetooth on your mobile device.
• Select "EVERSE 8" from the list of available devices to pair.
• For stereo setups, the EVERSE 8 supports Bluetooth true wireless stereo streaming. Refer to the QuickSmart Mobile app for detailed stereo pairing instructions.

4. QuickSmart Mobile App

• Download the QuickSmart Mobile app for comprehensive control and monitoring of your EVERSE 8.
• The app allows for remote adjustment of mixer settings, effects, and system parameters.

5. Additional Features

• 12 V DC Port: Provides power for wireless microphone systems. An optional accessory tray can be attached to secure receiver hardware.
• Charging Port: A USB charging port is available for mobile devices when streaming.
• Weatherized Design: With the included weatherized input cover, the EVERSE 8 meets IP43 rating (water resistant for splashes and light rain) when running on battery power and Bluetooth streaming.

Maintenance

1. Cleaning

• Loudspeaker: Use a soft, dry cloth to clean the exterior of the EVERSE 8. For stubborn dirt, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the ports or openings.
• Tote Bag: The rugged water-resistant polyester construction can be wiped clean with a damp cloth. For deeper cleaning, follow fabric care instructions.

2. Storage

• Store the loudspeaker and tote bag in a cool, dry place away from direct sunlight and extreme temperatures.
• When storing the EVERSE 8 for long periods, ensure the battery is partially charged (around 50%) to prolong its lifespan. The battery protection circuitry helps prevent over-discharge.
• Always use the Gator Cases tote bag for transport and storage to protect the loudspeaker from dust, scratches, and minor impacts.

Troubleshooting

Specifications

Electro-Voice EVERSE 8 Loudspeaker

Gator Cases Heavy-Duty Speaker Tote Bag

Warranty and Support

For detailed warranty information regarding your Electro-Voice EVERSE 8 loudspeaker, please refer to the warranty card included with your product or visit the official Electro-Voice website. For the Gator Cases Heavy-Duty Speaker Tote Bag, consult Gator Cases' official documentation or website for their specific warranty terms.

Should you require technical assistance, troubleshooting beyond this manual, or service, please contact the respective manufacturer's customer support. Ensure you have your product model number and purchase date available when contacting support.

• Electro-Voice Support: www.electrovoice.com/support
• Gator Cases Support: www.gatorcases.com/support