1. Introduction
Thank you for choosing the Olafus 60W Plug-in LED Flood Light. This product is designed to provide efficient and reliable outdoor illumination with advanced features such as a dusk-to-dawn sensor, remote control operation, and adjustable brightness. This manual provides detailed instructions for safe installation, operation, and maintenance to ensure optimal performance and longevity of your flood light.
2. Important Safety Instructions
- Read all instructions carefully before installation and operation.
- Ensure the power supply is disconnected before any installation, maintenance, or cleaning.
- This product is designed for outdoor use and is IP65 waterproof. However, avoid submerging it in water.
- Do not attempt to modify or repair the light fixture. Contact qualified personnel for service.
- Ensure the mounting surface is stable and can support the weight of the fixture.
- Keep the power cord away from sharp objects, hot surfaces, and chemicals.
3. Package Contents
Verify that all components are present in the package:
- Olafus 60W LED Flood Light (1 unit)
- Remote Control (1 unit)
- Expansion Screws (for mounting)
- Instruction Manual (this document)
4. Product Overview
The Olafus 60W LED Flood Light features three adjustable light heads, a built-in photocell sensor for dusk-to-dawn operation, and a remote control for convenient settings adjustment. The robust aluminum housing ensures durability and efficient heat dissipation.
Figure 1: Olafus 60W LED Flood Light and Remote Control
5. Installation Instructions
The Olafus flood light is designed for easy plug-in installation, requiring no complex wiring. Follow these steps:
- Choose a Location: Select a suitable outdoor location (e.g., yard, garage, garden, eave, driveway) that provides the desired illumination coverage. Ensure the location allows the 1.5m power cord to reach a standard three-prong outdoor socket.
- Mount the Fixture: Use the provided expansion screws to securely mount the flood light base to the chosen surface.
- Adjust Light Heads: Loosen the screws on the side light heads and the main light head using a crosshead screwdriver. Adjust the light heads to direct the illumination as needed. The side heads can rotate up to 335 degrees, and the main head can tilt up to 90 degrees, allowing for a custom beam angle up to 270 degrees. Tighten the screws once adjusted.
- Connect Power: Plug the flood light's three-prong power cord into a compatible outdoor electrical outlet.
Figure 2: Installation Diagram
Figure 3: Adjustable Light Heads
6. Operating Instructions
The flood light offers two primary operating modes: Dusk-to-Dawn (D2D) and Always-On, controlled via the included remote.
6.1 Remote Control Overview
The remote control allows you to switch modes, set timers, and adjust brightness. Ensure the remote is pointed directly at the light fixture for optimal response.
Figure 4: Remote Control Functions
6.2 Operating Modes
- Dusk-to-Dawn (D2D) Mode: Press the 'D2D' button on the remote. In this mode, the built-in photocell sensor automatically turns the light ON at dusk and OFF at dawn.
- Always-On Mode: Press the 'Always On' button on the remote. In this mode, the light can be manually turned ON or OFF using the 'ON/OFF' button on the remote or by using the home switch connected to the outlet.
Figure 5: Dusk-to-Dawn vs. Always-On Mode
6.3 Timer Function
The timer function is available only in Dusk-to-Dawn mode. To set a timer:
- Ensure the light is in D2D mode.
- Press one of the timer buttons (2H, 4H, 6H, 8H, 12H) on the remote. The light will stay on for the selected duration after dusk and then turn off.
- To cancel the timer, press the 'ESC' button on the remote.
Figure 6: Timer Function in D2D Mode
6.4 Brightness Adjustment
You can adjust the brightness of the flood light using the remote control:
- Use the '+' button to increase brightness.
- Use the '-' button to decrease brightness.
- The light offers a range of brightness levels from 1% to 100%.
Figure 7: Brightness Adjustment
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your flood light:
- Cleaning: Periodically clean the light fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the power is disconnected before cleaning.
- Inspection: Regularly inspect the power cord for any signs of damage. Check the mounting for security.
- Photocell Sensor: Keep the photocell sensor (small black dome on the fixture) clean and free from obstructions to ensure proper dusk-to-dawn operation.
8. Troubleshooting
If you encounter issues with your Olafus flood light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power; Faulty outlet; Light in D2D mode during daytime; Remote battery low. | Check power connection and outlet; Wait until dark or switch to Always-On mode; Replace remote battery. |
| Dusk-to-Dawn mode not working correctly. | Photocell sensor obstructed or dirty; Ambient light too high. | Clean the photocell sensor; Ensure no other light sources are directly illuminating the sensor. |
| Remote control not responding. | Remote battery low or dead; Obstruction between remote and light; Remote not pointed at light. | Replace remote battery; Ensure clear line of sight; Point remote directly at the light fixture. |
| Light flickers or dims unexpectedly. | Unstable power supply; Loose connection. | Check power source stability; Ensure plug is securely inserted. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Olafus |
| Model Name | 3-LBD55M |
| Power Source | Plug In Electric |
| Wattage | 60 Watts |
| Brightness | 6000 Lumens |
| Color Temperature | 6500 Kelvin (Daylight White) |
| Material | Aluminum |
| Water Resistance Level | IP65 Waterproof |
| Control Method | Remote Control |
| Special Features | Dimmable, Timer, Dusk-to-Dawn Sensor |
| Product Dimensions | 10.71"L x 5.28"W x 3.86"H |
| Item Weight | 2.18 Pounds |
| Voltage | 120 Volts |
10. Warranty and Customer Support
Olafus products are manufactured to high-quality standards. For warranty information, technical support, or any questions regarding your product, please contact Olafus customer service. Details can typically be found on the product packaging or the official Olafus website.
Please retain your purchase receipt as proof of purchase for warranty claims.
