FABATO 41.7'' Lift Top Coffee Table with 2 Storage Drawers, Espresso

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your FABATO 41.7'' Lift Top Coffee Table. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

The FABATO Lift Top Coffee Table features a versatile design with a lifting tabletop mechanism, two storage drawers, and a hidden compartment. It is constructed from EPA standard particleboard with solid wooden legs, designed for stability and durability.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in injury or damage to the product.

• Always follow the assembly instructions carefully. Ensure the table is assembled correctly and securely to prevent tipping or collapse.
• Do not exceed the weight limit of the table to maintain stability.
• Keep small parts and packaging materials away from children during assembly to prevent choking hazards.
• Exercise caution with the sharp corners of the table, especially in high-traffic areas or around small children. Consider adding corner protectors if necessary.
• Do not sit or stand on the table, especially when the top is in the raised position.

3. Package Contents

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Tabletop (1)
• Side Panels (2)
• Bottom Shelf (1)
• Drawer Panels (for 2 drawers)
• Wooden Legs (4)
• Lift Mechanism Hardware (Gas Struts, Hinges)
• Drawer Slides (for 2 drawers)
• Drawer Handles (2)
• Assembly Hardware (Screws, Dowels, Cam Locks, etc.)
• Installation Tool (Allen Wrench/Screwdriver)
• Assembly Guide
• Silencer Pads (for lift top)

4. Setup and Assembly Instructions

Assembly is required for this coffee table. It is recommended that two people assemble the table for easier and faster completion. A screwdriver is recommended in addition to the included installation tool.

1. Prepare the Area: Clear a spacious, clean, and soft surface (e.g., a rug or the packaging styrofoam) to prevent scratching the furniture during assembly.
2. Identify Parts: Lay out all components and hardware. Compare them with the parts list in the included assembly guide to ensure everything is present.
3. Assemble the Base Frame: Attach the wooden legs to the side panels and bottom shelf using the provided hardware. Ensure all connections are secure.
4. Install Drawer Slides: Secure the drawer slides to the designated areas on the table frame and the drawer panels according to the assembly guide. Ensure they are aligned correctly for smooth operation.
5. Assemble Drawers: Construct the two storage drawers using the drawer panels and hardware. Attach the drawer handles.
6. Install Lift Mechanism: Carefully attach the heavy-duty gas struts and hinges to the table frame and the underside of the tabletop. Follow the specific diagrams in the assembly guide for correct orientation and secure fastening.
7. Attach Tabletop: Connect the tabletop to the lift mechanism. Ensure the mechanism operates smoothly and the tabletop is securely attached.
8. Insert Drawers: Slide the assembled drawers into their respective compartments.
9. Apply Silencer Pads: Attach the silencer pads to the underside of the lift top where it meets the table frame to prevent noise when closing.
10. Final Check: Verify all screws and connections are tightened. Test the lift-top mechanism and drawers for smooth operation.

5. Operating Instructions

5.1 Lift Top Mechanism

The tabletop is designed to lift and lower smoothly, providing an elevated surface for dining, working, or other activities.

1. To Lift: Gently pull the front edge of the tabletop upwards. The gas struts will assist in lifting the top to its extended position.
2. To Lower: Apply gentle downward pressure to the tabletop. The gas struts will allow it to lower silently and smoothly back into the closed position. Ensure both sides click into place.

The space beneath the lift top provides a large hidden compartment for storing items such as blankets, books, or snacks, keeping them dust-free and out of sight.

5.2 Storage Drawers

The two bottom drawers provide additional storage for smaller items.

1. To Open: Pull the drawer handle outwards.
2. To Close: Push the drawer inwards until it is fully seated in the compartment.

The open shelf below the hidden compartment offers easy access storage for frequently used items or decorative pieces.

6. Maintenance

Proper care will ensure the longevity and appearance of your coffee table.

• Cleaning: Wipe the surface with a damp cloth for general cleaning. For a thorough clean, follow with a dry cloth to remove any moisture. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Spills: Immediately wipe up any spills to prevent staining or damage to the engineered wood.
• Hardware: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Avoid Excessive Weight: Do not place excessively heavy items on the tabletop or inside the compartments to prevent structural strain.
• Sunlight Exposure: Avoid prolonged direct sunlight exposure to prevent fading or discoloration of the finish.

7. Troubleshooting

If you encounter any issues with your coffee table, refer to the following common problems and solutions:

8. Specifications

9. Warranty and Support

For warranty information or customer support regarding your FABATO Lift Top Coffee Table, please refer to the documentation included with your purchase or contact the retailer/manufacturer directly. Ensure you have your model number (JSCT001BR) and proof of purchase available when contacting support.