Trust Gaming 24888
Trust Gaming GXT 923 Ybar Wireless Gaming Mouse User Manual
Model: 24888
Introduction
The Trust Gaming GXT 923 Ybar is a high-performance wireless gaming mouse designed for an immersive gaming experience. It features a low-latency 2.4GHz wireless connection, customizable RGB lighting, and a long-lasting rechargeable battery. This mouse is also built with sustainability in mind, incorporating 69% recycled plastics in its construction. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your GXT 923 Ybar mouse.
Key Features
- Wireless Freedom: Enjoy a stable and low-latency 2.4GHz wireless connection for uninterrupted gameplay.
- Extended Battery Life: The integrated rechargeable battery provides up to 50 hours of continuous use on a single charge.
- Adjustable DPI: Customize your sensitivity with a wide DPI range from 200 to 7200, perfect for various gaming styles.
- Programmable Buttons: Six programmable buttons, including two convenient thumb buttons, allow for personalized control and macro assignments via advanced software.
- Vibrant RGB Lighting: Full RGB LED lighting enhances your gaming setup and can be customized through the software.
- Sustainable Design: Constructed with 69% recycled plastics, contributing to environmental responsibility.
Setup Guide
- Unpack the Mouse: Carefully remove the GXT 923 Ybar mouse and its accessories from the packaging.
- Locate the USB Receiver: The wireless USB receiver is typically stored in a compartment on the underside of the mouse for safe transport.
- Connect the Receiver: Insert the USB receiver into an available USB port on your PC or laptop.
- Power On the Mouse: Locate the On/Off switch on the bottom of the mouse and slide it to the 'On' position.
- Initial Pairing: The mouse should automatically pair with the receiver. If not, ensure the receiver is properly inserted and the mouse is powered on.
- Charge the Mouse: For optimal performance, it is recommended to fully charge the mouse before first use. Connect the included USB-C charging cable to the mouse and a USB power source.
Operating Instructions
DPI Adjustment
The GXT 923 Ybar mouse allows for on-the-fly DPI adjustment. Use the dedicated DPI selection button (often located behind the scroll wheel) to cycle through preset DPI levels. The mouse supports resolutions from 200 to 7200 DPI.
Programmable Buttons and Software
The mouse features 6 programmable buttons. To unlock the full customization potential, including macro assignments, button remapping, and RGB lighting effects, download the advanced software from the official Trust Gaming website. Refer to the software's user interface for specific instructions on customization.
Download the software from: trust.com/24888
Charging During Play
The GXT 923 Ybar mouse supports charging while in use. If the battery runs low during a gaming session, simply connect the USB-C charging cable to the mouse and a power source, and continue playing without interruption.
Maintenance
- Cleaning: Use a soft, dry cloth to wipe the surface of the mouse. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the internal components. Avoid harsh chemicals or abrasive cleaners.
- Sensor Cleaning: Periodically clean the optical sensor on the bottom of the mouse with a cotton swab to ensure accurate tracking.
- Battery Care: To prolong battery life, avoid fully discharging the mouse frequently. Charge it when the low battery indicator appears. Store the mouse in a cool, dry place when not in use for extended periods.
- Storage: When not in use, store the USB receiver in its dedicated compartment on the underside of the mouse to prevent loss.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mouse not responding | Low battery; USB receiver disconnected; Mouse not powered on; Driver issue. | Charge the mouse; Reinsert USB receiver; Turn mouse On; Reinstall mouse drivers. |
| Cursor erratic or jumpy | Dirty optical sensor; Unsuitable surface; Interference. | Clean the optical sensor; Use on a clean, non-reflective mouse pad; Move away from other wireless devices. |
| RGB lighting not working | Software settings; Low battery. | Check RGB settings in the Trust Gaming software; Charge the mouse. |
| Buttons not programmable | Software not installed or running; Incorrect software version. | Download and install the latest Trust Gaming software; Ensure software is running in the background. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | GXT 923 Ybar |
| Model Number | 24888 |
| Brand | Trust Gaming |
| Color | Black |
| Connectivity Technology | 2.4GHz Wireless (Radio-frequency), USB (for charging) |
| DPI Range | 200 - 7200 DPI |
| Number of Buttons | 6 (Programmable) |
| Motion Detection Technology | Optical |
| Battery Type | Lithium-ion (Rechargeable) |
| Battery Life | Up to 50 hours |
| Compatible Operating Systems | Windows 10, Windows 11 |
| Compatible Devices | PC, Laptop |
| Material | 69% Recycled Plastics |
| Finish | Matte |
| Hand Orientation | Right |
| Manufacturer | Trust |
| Country of Origin | China |
Warranty and Support
Manufacturer's Warranty
The Trust Gaming GXT 923 Ybar Wireless Gaming Mouse comes with a 2-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Customer Support
For technical support, troubleshooting assistance, or warranty inquiries, please visit the official Trust Gaming support website or contact their customer service. Detailed contact information can typically be found on the Trust Gaming website or product packaging.
For more information, visit the Trust Gaming Brand Store.
Related documents24888
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.