Armor All AA12V2 0903 Car Vac Instruction Manual

1. Product Overview

The Armor All AA12V2 0903 Car Vac is a compact, corded electric vacuum designed for quick cleanup of wet and dry messes in your vehicle. It features powerful suction and a range of accessories for detailed cleaning.

Figure 1: Armor All AA12V2 0903 Car Vac with included accessories and storage bag.

Key Features:

• Wet/Dry Capability: Designed to handle both liquid spills and dry debris.
• 12V AC Plug: Connects directly to most 12V automotive ports for convenient power.
• Powerful Suction: 20-inch water lift motor for effective cleaning.
• Extended Reach: 15-feet of cleaning reach with an expandable spiral cord.
• Versatile Accessories: Includes a crevice tool, hose, pet-hair rake, detail brush, and 2 washable cartridge filters.
• Compact Design: Allows for easy maneuverability between car seats.
• Removable Dust Cup: Ensures neat and easy cleanup of collected debris.

2. Setup

1. Unpack Contents: Carefully remove the car vac and all accessories from the storage bag. Ensure all components listed in the "Included Components" section are present.
2. Connect Power: Locate a 12V automotive power outlet (cigarette lighter socket) in your vehicle. Insert the 12V AC plug of the car vac firmly into the outlet.
   

   Figure 2: Connecting the 12V AC power plug.

3. Attach Accessories: Select the appropriate cleaning attachment for your task.
   • For general vacuuming, use the main nozzle.
   • For tight spaces and crevices, attach the crevice tool directly to the vacuum or to the flexible hose for extended reach.
     

     Figure 3: Detail cleaning with the crevice tool.

   • For vents and scratch-prone surfaces, use the detail brush.
   • For pet hair removal from carpets and upholstery, use the pet-hair rake.
   • For extended reach into difficult areas, connect the flexible hose.
     

     Figure 4: The expandable spiral cord provides extended reach.

3. Operating Instructions

Once the unit is properly set up, you can begin cleaning your vehicle's interior.

1. Power On: Locate the ON/OFF switch on the main body of the car vac and slide it to the "ON" position. The vacuum will start.
2. Dry Vacuuming: For dry debris such as dirt, crumbs, or dust, use the appropriate attachment and move the nozzle slowly over the surface to be cleaned.
   

   Figure 5: Effectively removing pet hair from upholstery.

3. Wet Vacuuming: For liquid spills, ensure the dust cup is not filled beyond the MAX fill line. Use the main nozzle or a suitable attachment to suction the liquid. Avoid submerging the unit.
   

   Figure 6: The car vac is ideal for liquid spills.

4. Power Off: After cleaning, slide the ON/OFF switch to the "OFF" position. Disconnect the 12V AC plug from the automotive port.

4. Maintenance

Regular maintenance ensures optimal performance and extends the life of your Armor All Car Vac.

1. Emptying the Dust Cup:
   • Press the dust cup release button to detach the dust cup from the main unit.
   • Carefully empty the contents into a trash receptacle.
   

   Figure 7: The removable dust cup allows for easy disposal of debris.

2. Cleaning the Filter:
   • Remove the filter from the dust cup.
   • The cartridge filters are washable. Rinse them under running water until clean.
   • Allow the filter to air dry completely before reinserting it into the dust cup. Ensure it is fully dry to prevent mold or damage.
   • The product includes 2 washable cartridge filters, allowing you to use one while the other dries.
3. Storage: Store the car vac and all accessories in the provided storage bag when not in use. This keeps all components organized and protected.
   

   Figure 8: The compact design and storage bag make it easy to store.

5. Troubleshooting

• No Power / Unit Not Turning On:
  • Ensure the 12V AC plug is fully and securely inserted into the automotive power outlet.
  • Check your vehicle's fuse box. Some 12V outlets are on a 10 Amp fuse, which may blow if the vacuum draws too much power. Consider using an outlet with a higher amperage fuse (e.g., 30 Amp) if available, or consult your vehicle's manual for power outlet specifications.
  • Verify the ON/OFF switch is in the "ON" position.
• Weak Suction:
  • Check if the dust cup is full and needs emptying.
  • Inspect the filter for excessive dirt or blockage. Clean the filter as described in the Maintenance section.
  • Ensure all attachments and the dust cup are securely connected to the main unit, with no gaps that could cause air leaks.
  • Check the nozzle and hose for any blockages. Carefully remove any obstructions.
• Unit Overheating:
  • If the unit feels hot, turn it off immediately and disconnect it from the power source.
  • Allow the unit to cool down for at least 15-20 minutes before resuming use.
  • Ensure the vents on the vacuum body are not obstructed, as this can impede airflow and cause overheating.

6. Specifications

7. Warranty & Support

For warranty information, please refer to the product packaging or contact Armor All customer support directly. You can also visit the official Armor All store for more information and product registration.

Visit the Armor All Store