Vodafone Smart P11 Phone Case and Screen Protector User Manual

1. Introduction

This manual provides instructions for the installation, operation, and maintenance of your Vodafone Smart P11 phone case and tempered glass screen protector. This product is designed to offer robust protection and enhanced functionality for your device.

2. Setup

2.1 Installing the Phone Case

1. Ensure your Vodafone Smart P11 phone is clean and free of dust or debris.
2. Gently align the phone with the soft silicone frame of the case.
3. Press the phone firmly into the case, ensuring all corners and edges are securely seated within the silicone and PC hard back panel. The case features a 2-in-1 design with a hard PC back and a soft silicone frame for optimal fit and shock absorption.

Image: The phone case features a shockproof design with four-corner thickening and integrated shock airbags to protect against impacts.

2.2 Applying the Tempered Glass Screen Protector

The package includes a tempered glass screen protector for additional display protection.

1. Clean your phone screen thoroughly using the provided cleaning wipes (if included) or a microfiber cloth. Ensure no dust particles remain.
2. Carefully peel off the protective film from the adhesive side of the tempered glass.
3. Align the screen protector precisely with your phone's screen, paying attention to cutouts for the speaker and camera.
4. Gently lower the screen protector onto the screen. It will adhere automatically.
5. Use a clean cloth or your finger to gently push out any air bubbles towards the edges of the screen.

Image: Key features of the tempered glass screen protector, highlighting its durability and clarity.

2.3 Attaching the Ring Stand

The adhesive metal finger ring support can be attached to the case or used separately.

1. Choose a suitable position on the back of the phone case for the ring stand. Ensure the surface is clean and dry.
2. Peel off the protective film from the adhesive backing of the ring stand.
3. Press the ring stand firmly onto the chosen spot on the case for at least 30 seconds. Allow the adhesive to cure for a few hours before heavy use.

3. Operating Features

3.1 Using the Ring Stand

The integrated finger ring support offers multiple functionalities:

• Secure Grip: Insert your finger through the ring for a more secure hold on your phone, reducing the risk of accidental drops.
• Kickstand Function: Rotate the ring 360 degrees and adjust it 180 degrees to prop up your phone in landscape or portrait mode for hands-free viewing.

Image: The ring stand facilitates comfortable one-hand operation, allowing easier access to the entire screen.

3.2 Magnetic Car Mount Compatibility

The metal plate integrated into the ring stand allows for magnetic attachment to compatible car mounts. This provides a convenient and secure way to use your phone for navigation or hands-free calls while driving.

Note: This case does not support wireless charging due to the metal ring component.

Image: The ring stand's magnetic compatibility allows for easy attachment to car mounts, offering multi-angle support.

3.3 Luminous Effect

The case features a special material that absorbs light and sunlight. In a dark environment, this absorbed energy is released as a fluorescent glow, creating a luminous effect.

• Activation: Expose the case to natural sunlight or artificial light for a period to charge the luminous material.
• Effect: The case will glow in low-light conditions, making your phone easier to locate.

Image: The luminous effect is achieved through a light-absorbing layer within the case's multi-layered back panel, providing a glow in dark environments.

4. Maintenance

4.1 Cleaning the Phone Case

To maintain the appearance and functionality of your phone case:

• Wipe the case regularly with a soft, damp cloth.
• For stubborn dirt, use a mild soap solution and rinse thoroughly.
• Avoid harsh chemicals or abrasive cleaners, as these can damage the PC hard back panel or silicone frame.
• Ensure the case is completely dry before re-installing your phone.

4.2 Cleaning the Screen Protector

To keep your screen protector clear and responsive:

• Use a microfiber cloth to gently wipe away fingerprints and smudges.
• For deeper cleaning, lightly dampen the cloth with water or a screen cleaner designed for electronics.
• Avoid excessive pressure or sharp objects that could scratch the protector.

5. Troubleshooting

5.1 Screen Protector Bubbles

• Issue: Air bubbles appear under the screen protector after installation.
• Solution: Gently lift the nearest edge of the screen protector and reapply, using a credit card or similar flat object wrapped in a cloth to push bubbles towards the edge as you lay it down. Ensure the screen is dust-free before reapplication.

5.2 Ring Stand Adhesion Issues

• Issue: The ring stand does not adhere securely or detaches.
• Solution: Ensure the case surface is clean and dry before application. Apply firm pressure for an extended period (e.g., 30 seconds) and allow the adhesive to cure for several hours without stress. If the adhesive is compromised, a new adhesive pad may be required.

5.3 Luminous Effect Not Visible

• Issue: The case does not glow in the dark.
• Solution: The luminous material requires exposure to light to charge. Ensure the case has been exposed to sufficient natural or artificial light for a period before expecting it to glow in a dark environment.

6. Specifications

7. Warranty & Support

For any questions, concerns, or warranty inquiries regarding your Vodafone Smart P11 phone case and screen protector, please contact the seller or manufacturer directly through your purchase platform. Please retain your proof of purchase for warranty claims.