1. Product Overview
The Skullcandy Smokin’ Buds are true wireless earbuds designed to deliver clear, full sound with a comfortable, noise-isolating fit. They feature intuitive touch controls, multiple EQ modes, and are built with sustainability in mind, utilizing 50% certified recyclable plastics.
Image: Skullcandy Smokin' Buds in Matcha color, showcasing the earbuds and their compact charging case.
2. What's in the Box
Your Skullcandy Smokin’ Buds package includes the following components:
- Smokin' Buds® True Wireless Earbuds
- Charging Case
- Ear Gels (Sizes: Small, Medium, Large)
- USB-C Charging Cable
- Quick Start & User Guides
3. Setup
3.1 Charging Your Earbuds
Before first use, fully charge your Smokin’ Buds. Place both earbuds into the charging case. Connect the provided USB-C charging cable to the port on the charging case and plug the other end into a compatible USB power source. The LED indicator on the case will show charging status.
A full charge provides up to 20 hours of total battery life (8 hours in earbuds + 12 hours in case). Rapid Charge feature allows for 2 hours of listening from a 10-minute charge.
Image: Visual representation of the 20-hour battery life, highlighting the earbuds and charging case.
3.2 Pairing with Your Device
- Ensure your earbuds are charged.
- Open the charging case. The earbuds will automatically enter pairing mode.
- On your device (smartphone, tablet, etc.), go to Bluetooth settings and turn Bluetooth on.
- Select "Smokin' Buds" from the list of available devices.
- Once connected, you will hear an audio prompt, and the LED indicator on the earbuds will change.
3.3 Achieving a Comfortable Fit
The Smokin’ Buds come with three sizes of ear gels (S, M, L) to ensure a secure and comfortable fit. Experiment with different sizes to find the best seal for optimal sound quality and noise isolation.
Image: A close-up of an earbud being held, illustrating its ergonomic design for a comfortable fit.
4. Operating Instructions
4.1 Intuitive Touch Controls
The Smokin’ Buds feature touch controls on each earbud for easy management of your audio and calls:
- 1 Tap: Play/Pause music, Answer/End calls.
- 2 Taps: Volume Up (Right earbud), Volume Down (Left earbud).
- 3 Taps: Track Forward (Right earbud), Track Back (Left earbud).
- 4 Taps: Cycle through Preset EQ Modes.
- Press and Hold (2 seconds): Activate device's voice assistant.
4.2 Preset EQ Modes
Optimize your listening experience by cycling through three preset EQ modes:
- Music Mode: Balanced sound for general listening.
- Movie Mode: Enhanced dialogue and immersive sound for films.
- Podcast Mode: Clear vocals for spoken content.
Image: Demonstrates the earbud in use and highlights the availability of preset EQ modes.
4.3 Noise Isolating Fit
The ergonomic design and proper ear gel selection provide a passive noise-isolating fit, reducing ambient sound for a more immersive audio experience.
Image: Diagram illustrating the internal sound components and noise isolation capabilities of the earbuds.
5. Maintenance
5.1 Sweat and Water Resistance
The Smokin’ Buds have an IPX4 rating, making them resistant to sweat and splashes. This means they can withstand light rain and intense workouts. However, they are not designed for submersion in water.
Image: Earbud with water droplets, demonstrating its water resistance.
5.2 Cleaning and Storage
- Regularly clean the ear gels and earbud surfaces with a soft, damp cloth.
- Ensure the charging contacts on both the earbuds and the case are clean and dry before charging.
- Store the earbuds in their charging case when not in use to protect them and keep them charged.
6. Troubleshooting
6.1 Pairing Issues
- Ensure Bluetooth is enabled on your device and the earbuds are in pairing mode.
- Try turning Bluetooth off and on again on your device.
- If previously paired, remove "Smokin' Buds" from your device's Bluetooth list and attempt to re-pair.
- Ensure earbuds are sufficiently charged.
6.2 Sound Issues (Low Volume, No Sound)
- Check the volume levels on both your device and the earbuds.
- Ensure earbuds are properly seated in your ears and the correct ear gel size is used for a good seal.
- Clean any debris from the earbud speakers.
6.3 Charging Issues
- Verify the USB-C cable is securely connected to both the case and the power source.
- Try a different USB-C cable or power adapter.
- Ensure the charging contacts on the earbuds and inside the case are clean.
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | Smokin' Buds |
| Model Number | S2TAW-R954 |
| Connectivity Technology | Wireless, Bluetooth |
| Bluetooth Version | 4.0 |
| Battery Life (Total) | Up to 20 Hours (8 hours earbuds + 12 hours case) |
| Water Resistance | IPX4 (Sweat and Water Resistant) |
| Control Method | Touch |
| Material | 50% Renewable Plastics |
| Item Weight | 2.47 ounces (70 grams) |
| Product Dimensions | 5.71 x 3.15 x 1.22 inches |
8. Warranty and Support
8.1 Warranty Information
Your Skullcandy Smokin’ Buds are covered by a 1-Year USA Limited Warranty. This warranty covers manufacturing defects and workmanship under normal use. Please retain your proof of purchase for warranty claims.
8.2 Customer Support
For further assistance, technical support, or warranty inquiries, please visit the official Skullcandy support website or contact their customer service team. Refer to the Quick Start & User Guides included in your package for specific contact details.
You can also visit the Skullcandy Store on Amazon for more product information and resources.
