Babysense MaxView Add-On Camera Instruction Manual

1. Introduction

This manual provides essential instructions for the proper setup, operation, and maintenance of your Babysense MaxView Add-On Camera. This camera is designed to expand your existing Babysense MaxView Video Baby Monitor system, allowing you to monitor multiple rooms or children from a single parent unit. It is important to note that this add-on camera is compatible only with the Babysense MaxView Monitor and is not suitable for any other model.

Please read this manual thoroughly before use and retain it for future reference.

2. Important Safety Instructions

• Strangulation Hazard: Keep all cords out of reach of children. Never place the camera or cords within 3 feet (1 meter) of the crib or playpen. Secure cords to a wall or furniture using cable clips.
• Water and Moisture: Do not expose the product to rain or moisture. Do not use near water (e.g., bathtub, sink).
• Heat Sources: Do not place the product near heat sources such as radiators, heat registers, stoves, or other appliances that produce heat.
• Power Source: Use only the AC power adapter supplied with the product. Using other adapters may damage the device.
• Ventilation: Do not block any ventilation openings. Ensure proper airflow around the camera.
• Cleaning: Clean only with a dry cloth.
• Servicing: Do not attempt to repair or disassemble the product. Refer all servicing to qualified service personnel.

3. Package Contents

Your Babysense MaxView Add-On Camera package includes:

• Babysense MaxView Add-On Camera Unit
• AC Power Adapter for Camera Unit
• Wall Mount Screw Set
• User Manual (this document)

Note: The Babysense MaxView Parent Unit (monitor) is sold separately and is required for the operation of this add-on camera.

4. Product Overview

The Babysense MaxView Add-On Camera features a motorized pan and tilt function, digital zoom, night vision, and an RGB night light. It is designed for indoor use and can be placed on a tabletop or mounted on a wall.

Camera Unit Components

Image 4.1: Front view of the Babysense MaxView Add-On Camera. Shows the camera lens, microphone, and indicator lights. The base features the Babysense logo and an illuminated RGB light band.

Image 4.2: Back view of the Babysense MaxView Add-On Camera. Displays the power input port and the included power cable connected.

Image 4.3: Three views of the Babysense MaxView Add-On Camera demonstrating its RGB night light feature, illuminated in red, green, and blue colors.

5. Setup

5.1 Powering the Camera Unit

1. Connect the small plug of the AC power adapter to the power input port on the back of the camera unit.
2. Plug the other end of the AC power adapter into a standard electrical outlet.
3. The camera unit will power on automatically.

5.2 Positioning the Camera Unit

The camera unit can be placed on a flat surface (tabletop) or mounted on a wall.

• Tabletop Placement: Place the camera on a stable, flat surface in a location that provides a clear view of the desired monitoring area. Ensure it is out of reach of children.
• Wall Mounting:
  1. Choose a suitable location on the wall, ensuring a clear line of sight and proximity to a power outlet.
  2. Use the provided wall mount screw set to securely attach the camera to the wall. Follow the instructions in your main MaxView monitor manual for detailed mounting steps if available.
  3. Ensure the camera is mounted at a height and angle that provides optimal viewing.

Important: Always ensure the power cord is secured and kept out of reach of children to prevent strangulation hazards.

5.3 Pairing the Add-On Camera with Your MaxView Parent Unit

Your Babysense MaxView system supports up to four cameras. To add this new camera to your existing MaxView Parent Unit, follow these steps:

1. Ensure your MaxView Parent Unit is turned on and fully charged.
2. Power on the new add-on camera unit as described in Section 5.1.
3. On your MaxView Parent Unit, navigate to the Menu.
4. Select the Camera icon or option.
5. Choose an available camera slot (e.g., Camera 2, Camera 3, or Camera 4) and select the Add Camera or Pair option.
6. The Parent Unit will begin searching for the new camera. Within approximately 10-20 seconds, press and hold the Pair button (usually located on the bottom or back of the camera unit) for a few seconds until the Parent Unit confirms successful pairing.
7. Once paired, the image from the new camera will appear on your Parent Unit screen.

Refer to your main Babysense MaxView Video Baby Monitor user manual for specific instructions on navigating the Parent Unit menu and pairing additional cameras.

6. Operating the Add-On Camera

Once paired, the add-on camera operates in conjunction with your MaxView Parent Unit. All controls for camera functions are managed through the Parent Unit.

6.1 Switching Between Cameras

If you have multiple cameras paired, you can switch between them on your Parent Unit. Typically, this is done via a dedicated camera switch button or through the menu system. Some monitors may also offer a scan mode to cycle through all paired cameras automatically.

6.2 Remote Pan, Tilt, and Zoom

Use the directional controls on your MaxView Parent Unit to remotely adjust the camera's viewing angle:

• Pan: Move the camera horizontally (left and right).
• Tilt: Move the camera vertically (up and down).
• Digital Zoom: Activate the zoom function on the Parent Unit to magnify the image (x2 and x4 zoom ratios are available).

6.3 Night Vision

The camera is equipped with automatic infrared night vision. In low-light conditions, the camera will automatically switch to night vision mode, providing a clear black and white image of the monitored area.

6.4 Two-Way Talk-Back Audio

To speak through the camera unit, press and hold the talk button on your MaxView Parent Unit. Release the button to listen.

6.5 RGB Night Light and Lullabies

If your MaxView Parent Unit supports these features, you can remotely control the RGB night light and play lullabies through the add-on camera. Refer to your Parent Unit's manual for specific controls.

7. Maintenance

7.1 Cleaning the Camera Unit

• Ensure the camera unit is unplugged before cleaning.
• Use a soft, dry, lint-free cloth to wipe the surfaces of the camera.
• Do not use cleaning sprays or liquid cleaners directly on the camera.
• To clean the camera lens, use a soft cloth specifically designed for optics.

7.2 Storage

If you plan to store the camera for an extended period, unplug it from the power outlet and store it in a cool, dry place, away from direct sunlight and moisture.

8. Troubleshooting

9. Specifications

10. Warranty and Support

10.1 Warranty Information

Babysense products are manufactured to the highest quality standards. For detailed warranty information, please refer to the warranty card included with your original Babysense MaxView Video Baby Monitor system or visit the official Babysense website. The warranty typically covers manufacturing defects for a specified period from the date of purchase.

Please retain your proof of purchase for warranty claims.

10.2 Customer Support

If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact Babysense Customer Support.

• Online Support: Visit the official Babysense website for FAQs, support articles, and contact forms.
• Email Support: Refer to your product packaging or the Babysense website for the customer support email address.
• Phone Support: Refer to your product packaging or the Babysense website for customer support phone numbers.

When contacting support, please have your product model number (MaxView-ADDON-US) and purchase details ready.