1. Introduction
This manual provides instructions for the safe and effective use of your UpBright 12V AC/DC Adapter. This adapter is designed to provide power to NordicTrack RW900 Rower models and other compatible devices. Please read this manual thoroughly before use and retain it for future reference.
Figure 1: UpBright AC/DC Adapter connected to a NordicTrack RW900 Rower. The adapter provides power to the rowing machine.
2. Setup Instructions
- Unpack the Adapter: Carefully remove the AC/DC adapter and its power cord from the packaging.
- Inspect for Damage: Before use, visually inspect the adapter and cables for any signs of damage. Do not use if damaged.
- Connect the Power Cord: Connect the AC power cord to the adapter unit. Ensure a secure connection.
- Connect to Device: Plug the DC output connector of the adapter into the power input port of your NordicTrack RW900 Rower or compatible device.
- Connect to Power Outlet: Plug the AC power cord into a standard wall outlet (100-240VAC, 50/60Hz).
Figure 2: The UpBright 12V AC/DC Adapter unit with its detachable power cord. Ensure both parts are securely connected before plugging into a wall outlet.
3. Operating Guidelines
- Power On: Once connected, your device should receive power. Refer to your device's manual for specific power-on procedures.
- Safe Usage: Ensure the adapter is placed in a well-ventilated area to prevent overheating. Do not cover the adapter.
- Disconnecting: To disconnect power, first unplug the AC power cord from the wall outlet, then disconnect the DC connector from your device.
4. Maintenance
- Cleaning: Disconnect the adapter from all power sources before cleaning. Use a dry, soft cloth to wipe the surface. Do not use liquid cleaners.
- Storage: Store the adapter in a cool, dry place away from direct sunlight and moisture when not in use.
- Cable Care: Avoid bending or crimping the cables excessively. Do not place heavy objects on the cables.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on. | Adapter not properly connected. Wall outlet not functioning. Device power issue. | Ensure all connections are secure. Test the wall outlet with another device. Consult your device's manual for troubleshooting. |
| Adapter feels hot. | Poor ventilation. Overload. | Ensure the adapter is in a well-ventilated area. Do not cover it. Verify the device's power requirements do not exceed the adapter's capacity. |
| Intermittent power. | Loose connection. Damaged cable. | Check all connections. Inspect cables for damage. If damaged, discontinue use and replace. |
6. Specifications
- Input Voltage: 100-240VAC, 50/60Hz
- Output Voltage: 12V DC
- Wattage: 60 Watts
- Connector Type: 2-Pin
- Protection Features: Over Voltage Protection (OVP), Over Current Protection (OCP), Short Circuit Protection (SCP)
- Product Dimensions: 6 x 3 x 2 inches
- Item Weight: 8.8 ounces
- Compatible Devices: NordicTrack RW900 Rower (Models: NTEVRW15920.0, NTRW19147.0, NTRW19147.1, NTRW19147.2, NTRW19147.3, NTEVRW159200, NTRW191470, NTRW191471, NTRW191472, NTRW191473, NTRW19423-INT.0, NTRW19423INT.0, NTRW19423-INT0, NTRW19423INT0)
Figure 3: Physical dimensions of the UpBright AC/DC Adapter and cable features.
Figure 4: Internal security protection features of the adapter.
7. Warranty & Support
UpBright provides a limited warranty for this product. This includes a 30-day refund policy and a 24-month exchange policy for units in great working condition. For warranty claims or technical support, please refer to the contact information provided with your purchase or visit the official UpBright website.
Figure 5: The product includes a suitable AC power cord for your region and comes with a limited warranty certificate.