Swim & Fun UFO FX3 Pool Robot User Manual

1. Introduction

Thank you for choosing the Swim & Fun UFO FX3 Pool Robot. This wireless pool cleaner is designed to efficiently clean the bottom of your pool, providing a hassle-free maintenance experience. Its compact design, LED lighting, and intelligent navigation make it an ideal solution for keeping your pool sparkling clean. Please read this manual thoroughly before operating the device to ensure safe and optimal performance.

2. Safety Instructions

Always follow basic safety precautions when using electrical appliances, especially near water.

• Ensure the charging adapter is connected to a grounded outlet.
• Do not operate the robot if the power cord or plug is damaged.
• Keep children and pets away from the pool area when the robot is in operation.
• Do not enter the pool while the robot is cleaning.
• Only use the original charging adapter provided with the device.
• Do not attempt to disassemble or repair the robot yourself. Contact qualified service personnel.
• Always remove the robot from the pool before adding chemicals or performing maintenance.
• The robot is designed for private use only. For commercial use, specific warranty terms apply.
• An audible signal will sound if the robot exits the water while still powered on. This is a safety feature.

3. Product Overview

3.1 Components

The Swim & Fun UFO FX3 Pool Robot consists of several key components designed for efficient pool cleaning.

Figure 3.1: Swim & Fun UFO FX3 Pool Robot, top view with handle.

Figure 3.2: Exploded view of the UFO FX3 Pool Robot, showing internal components such as the motor, filter, and chassis.

Figure 3.3: Bottom view of the UFO FX3 Pool Robot, illustrating the internal structure and wheel placement.

3.2 Key Features

• Wireless Operation: No cables to manage, making it easy to deploy and retrieve.
• LED Lighting: Integrated LED lights illuminate the robot during operation, visible through the transparent blue cover.
• Efficient Cleaning: Cleans pool floors up to 50 m² and 2 meters deep in a single 90-minute cycle.
• Fine Filtration: Capable of filtering particles as small as 0.18 mm.
• Saltwater Compatible: Suitable for use in saltwater pools.
• Automatic Stop: Features an automatic stop function for convenience and safety.
• Intelligent Navigation: Equipped with smart navigation for thorough cleaning.

4. Setup

4.1 Initial Charging

1. Before first use, fully charge the robot.
2. Connect the charging adapter to the robot's charging port.
3. Plug the adapter into a standard electrical outlet (100-240V AC).
4. The charging indicator light will show the charging status. A full charge takes approximately 5-6 hours.
5. Ensure the charging ambient temperature is between 0°C and 45°C.

4.2 Preparing the Pool

• Ensure the pool water temperature is between 10°C and 35°C.
• Remove any large debris from the pool floor that could obstruct the robot.
• The robot is designed for flat-bottom pools and vinyl-coated surfaces.

5. Operating Instructions

5.1 Starting the Robot

1. Once fully charged, ensure the robot is powered off before placing it in the water.
2. Carefully lower the robot into the pool. It will sink to the bottom.
3. Power on the robot. It will begin its cleaning cycle automatically.
4. The robot will clean the pool floor for up to 90 minutes per cycle.

5.2 During Operation

• The robot will navigate intelligently to cover the pool floor.
• The integrated LED lights will be active during operation.
• Do not interfere with the robot while it is cleaning.

5.3 Retrieving the Robot

• The robot will automatically stop after its cleaning cycle.
• Use the retrieval hook or handle to carefully lift the robot out of the water.
• Allow excess water to drain from the robot before placing it on a dry surface.
• If the robot is still powered on when removed from water, an audible alarm will sound. Power it off.

6. Maintenance

6.1 Cleaning the Filter

Regular cleaning of the filter is crucial for maintaining the robot's performance.

1. After each cleaning cycle, open the robot to access the filter compartment.
2. Remove the filter.
3. Rinse the filter thoroughly with a garden hose until all debris is removed.
4. Ensure the filter is clean and dry before reassembling the robot.

6.2 Storage

• Store the robot in a cool, dry place away from direct sunlight and extreme temperatures.
• Ensure the robot is clean and dry before storing for extended periods.
• Charge the battery periodically if storing for a long time to maintain battery health.

7. Troubleshooting

This section addresses common issues you might encounter.

8. Specifications

9. Warranty Information

This Swim & Fun UFO FX3 Pool Robot is intended for private use only.

For commercial use, the warranty period is limited to 90 days from the date of purchase.

Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects under normal use conditions. Damage resulting from misuse, neglect, unauthorized repairs, or failure to follow instructions in this manual is not covered.

10. Support and Contact

For further assistance, technical support, or spare parts, please contact Swim & Fun customer service.

Visit the official Swim & Fun website for the most up-to-date contact information and support resources.

Website: www.swim-fun.com