1. Introduction and Safety Information
This manual provides essential instructions for the safe and efficient operation of your Beldray BEL01841VDE Airgo Cordless Vacuum Cleaner. Please read all instructions carefully before use and retain this manual for future reference.
Important Safety Instructions:
- Always ensure the vacuum cleaner is switched off and unplugged before cleaning or performing maintenance.
- Do not use the appliance if the power cord, plug, or product itself is damaged.
- This appliance is for domestic use only. Do not use outdoors or on wet surfaces.
- Do not pick up flammable or combustible materials, hot ashes, or large, sharp objects.
- Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
- Use only manufacturer-recommended attachments.
- Children should be supervised to ensure they do not play with the appliance.
2. Package Contents
Carefully unpack your Beldray Airgo Cordless Vacuum Cleaner and check that all components are present and in good condition. The package should contain:
- Main Vacuum Unit (with integrated battery)
- Extension Tube
- Motorized Floor Head
- Crevice Tool
- Wall Mount Bracket
- Power Adapter/Charger
- 10 x Vacuum Bags
- User Manual
Image: Overview of the Beldray Airgo Cordless Vacuum Cleaner and its main components, including the stick vacuum, handheld unit, and wall mount.
3. Setup and Assembly
3.1 Assembling the Vacuum Cleaner
- Insert the extension tube into the main vacuum unit until it clicks securely into place.
- Attach the motorized floor head to the other end of the extension tube, ensuring it clicks firmly.
- For handheld use, attach the desired accessory (e.g., crevice tool) directly to the main vacuum unit.
Image: Demonstrates the 2-in-1 functionality, showing the vacuum assembled as a stick vacuum and as a handheld unit.
3.2 Charging the Battery
Before first use, fully charge the vacuum cleaner's battery. The battery is integrated into the main unit.
- Connect the power adapter to the charging port on the main vacuum unit.
- Plug the power adapter into a suitable wall outlet.
- The charging indicator lights will illuminate, showing the charging status. A full charge takes approximately 4 hours.
- Once fully charged, disconnect the power adapter.
3.3 Wall Mount Installation
The included wall mount provides convenient storage for your vacuum cleaner and accessories.
- Choose a suitable location near a power outlet, ensuring it is at an appropriate height and on a sturdy wall.
- Mark the drilling points for the wall mount bracket.
- Drill holes and insert wall plugs (if necessary).
- Secure the wall mount bracket to the wall using the provided screws.
- Hang the vacuum cleaner on the wall mount for storage. Note: The wall mount does not charge the vacuum; the charger must be plugged in separately.
Image: The Beldray Airgo Cordless Vacuum Cleaner stored on its wall-mounted bracket, with the crevice tool also stored.
4. Operating Instructions
4.1 Powering On/Off and Suction Modes
- Press the power button on the main unit to turn the vacuum cleaner on.
- Press the mode selection button to cycle through the available suction power settings (e.g., Low, Medium, High).
- Press the power button again to turn the vacuum cleaner off.
4.2 Using as a Stick Vacuum
For cleaning floors and carpets, attach the extension tube and motorized floor head.
- Ensure the floor head is securely attached.
- Select the appropriate suction mode for your surface (lower for hard floors, higher for carpets).
- Guide the vacuum cleaner across the floor. The motorized brush roll will assist in picking up debris.
Image: The Beldray Airgo Cordless Vacuum Cleaner in stick mode, cleaning under a low table, highlighting its maneuverability.
Image: An overhead view of the Beldray Airgo Cordless Vacuum Cleaner being used on a light-colored carpet.
4.3 Using as a Handheld Vacuum
For quick clean-ups, upholstery, or hard-to-reach areas, detach the extension tube and use the main unit with an accessory.
- Press the release button to detach the extension tube.
- Attach the crevice tool directly to the main vacuum unit.
- Use the handheld unit to clean surfaces like sofas, car interiors, or tight corners.
Image: The Beldray Airgo Cordless Vacuum Cleaner used as a handheld unit with the crevice tool attached, cleaning a surface.
Image: A person using the handheld Beldray Airgo vacuum with the crevice tool to clean crumbs from a sofa.
5. Maintenance
Regular maintenance ensures optimal performance and extends the life of your vacuum cleaner.
5.1 Replacing the Vacuum Bag
The Beldray Airgo uses disposable vacuum bags for hygienic dust collection. Replace the bag when the indicator shows it is full or suction power decreases.
- Ensure the vacuum cleaner is switched off.
- Locate the dust compartment release latch on the main unit.
- Open the dust compartment.
- Carefully remove the full vacuum bag, ensuring the opening is sealed to prevent dust escape.
- Insert a new vacuum bag, ensuring it is correctly seated within the compartment.
- Close the dust compartment securely until it clicks.
Image: A person demonstrating how to open the dust compartment and replace the vacuum bag in the Beldray Airgo Cordless Vacuum Cleaner.
5.2 Cleaning the Filters
The vacuum cleaner is equipped with a HEPA filter. Regularly check and clean the filter to maintain suction power.
- With the vacuum bag removed, locate the HEPA filter.
- Gently remove the filter.
- Tap the filter over a waste bin to remove loose dust. If washable, rinse under cold running water until the water runs clear.
- Allow the filter to air dry completely for at least 24 hours before reinserting. Do not use a hairdryer or other heating devices.
- Reinsert the dry filter and close the dust compartment.
5.3 Cleaning the Motorized Floor Head
- Ensure the vacuum cleaner is off and disconnected from the extension tube.
- Inspect the brush roll for tangled hair, threads, or debris.
- Use scissors or a brush to carefully remove any obstructions from the brush roll.
- Wipe the exterior of the floor head with a damp cloth.
6. Troubleshooting
If you encounter issues with your Beldray Airgo Cordless Vacuum Cleaner, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum does not turn on. | Battery is depleted. | Charge the battery fully. |
| Reduced suction power. | Vacuum bag is full. | Replace the vacuum bag. |
| Reduced suction power. | Filter is clogged. | Clean or replace the HEPA filter. |
| Reduced suction power. | Obstruction in nozzle, tube, or floor head. | Turn off and clear any blockages. |
| Motorized brush roll not spinning. | Brush roll is jammed. | Turn off and remove tangled hair or debris from the brush roll. |
| Short operating time. | Battery not fully charged or aging battery. | Ensure battery is fully charged. If issue persists, battery may need replacement (contact customer support). |
7. Specifications
Technical details for the Beldray BEL01841VDE Airgo Cordless Vacuum Cleaner:
- Model Number: BEL01841VDE
- Brand: Beldray
- Dimensions (L x W x H): 14 x 34 x 71 cm
- Weight: 3.8 Kilograms
- Dust Capacity: 700 Millilitres
- Voltage: 22.2 Volts
- Runtime: Up to 45 minutes
- Noise Level: 70 dB
- Special Features: Cordless, 2-in-1 Handheld, Brushless Motor
- Filter Type: HEPA Filter
- Surface Recommendation: Hard Floors and Carpets
- Power Source: Battery Powered
- Included Components: Wall mount, Crevice tool, 10 Vacuum Bags
8. Warranty and Support
For warranty information, product support, or to purchase replacement parts and accessories, please refer to the official Beldray website or contact their customer service department. Keep your proof of purchase for any warranty claims.
