Inkbird IDT-02

Inkbird Digital Kitchen Timer IDT-02 Instruction Manual

Model: IDT-02

Introduction

Welcome to your new Inkbird Digital Kitchen Timer IDT-02. This manual provides detailed instructions for setting up, operating, and maintaining your timer to ensure optimal performance.

Key Features

Product Overview

The Inkbird IDT-02 timer features a sleek design with intuitive controls.

Components

Inkbird IDT-02 Digital Kitchen Timer with large LED display.

A close-up view of the Inkbird IDT-02 Digital Kitchen Timer, highlighting its large, clear LED display showing "00:00".

Setup

Charging the Timer

The IDT-02 timer has a built-in 650mAh rechargeable battery.

  1. Locate the USB-C charging port on the side of the timer.
  2. Connect the provided USB-C cable to the timer and a 5V USB power source (e.g., laptop, power bank, standard USB charger). Do not use a fast charger.
  3. The battery indicator on the screen will show charging status. A full charge takes approximately 1.6 hours and provides up to 5.5 days of use (based on 8 hours/day).
  4. A low battery reminder will appear on the screen when the battery is low.
Inkbird IDT-02 timer connected to a USB-C charging cable, illustrating its rechargeable design.

This image shows the Inkbird IDT-02 timer being charged via a USB-C cable connected to a laptop. Icons indicate a built-in 650mAh battery, 5.5 days battery life, 1.6 hours charging time, and a warning not to use fast chargers.

Power On/Off and Brightness

Press the power button on the side to cycle through brightness levels (2 levels) or turn the display off. ECO mode dims the screen to save power.

Inkbird IDT-02 timer displaying a bright LED screen and illustrating its energy-saving ECO mode.

This image demonstrates the timer's bright LED screen, visible in a well-lit room, and highlights its energy-saving ECO mode which dims the display.

Operating Instructions

Setting Time (Count-Down Mode)

  1. Ensure the timer is in count-down mode (indicated by a down arrow on the display). If not, press the HR and MIN buttons simultaneously to switch modes.
  2. Rotate the multi-functional knob clockwise to increase minutes/seconds, or counter-clockwise to decrease. The display will show the set time.
  3. Press the knob once to confirm the setting.
  4. Press the knob again to start the countdown.
Inkbird IDT-02 timer demonstrating one-button operation for setting countdown time.

This image illustrates how to set the countdown time by turning the multi-functional knob left or right. The display shows "99:59".

Count-Up Mode

  1. To switch to count-up mode, press the HR and MIN buttons simultaneously until an up arrow appears on the display.
  2. Press the knob to start counting up from 00:00.
  3. Press the knob again to pause/resume.
  4. Long press the knob for 3 seconds to reset the timer to 00:00.
Inkbird IDT-02 timer displaying a count-up timer in use, showing elapsed time.

This image shows the timer in count-up mode, displaying "00:06" as it counts up.

Memory Function

The timer automatically saves your last set time. To quickly start the last set time, simply press the multi-functional knob.

Inkbird IDT-02 timer demonstrating its smart memory function for quick starts.

This image highlights the timer's memory function, allowing users to quickly recall and start a previously set time, such as "02:59".

Adjusting Volume

Use the volume control switch on the side to select one of the 4 volume levels: Mute, Low, Medium, or High.

Inkbird IDT-02 timer illustrating its adjustable volume levels, from mute to high.

This image shows the side of the timer with the volume control switch, indicating options for mute, low, medium, and high volume settings.

Placement Methods

The IDT-02 offers versatile placement options:

Inkbird IDT-02 timer demonstrating its magnetic back on a refrigerator and its foldable stand on a table.

This image displays two ways to place the timer: magnetically attached to a refrigerator and standing on a table using its foldable kickstand.

Maintenance

Cleaning

Wipe the timer with a soft, damp cloth. Do not use abrasive cleaners or submerge the device in water.

Battery Care

Recharge the timer when the low battery indicator appears. Avoid overcharging or completely draining the battery for extended periods to prolong battery life.

Troubleshooting

Display Dims or Goes Black

The timer has an ECO mode to conserve battery. Check the brightness setting on the side. If the issue persists, ensure the battery is fully charged.

Buttons Not Responding

Ensure the timer is powered on and not in a locked state. Try resetting the timer by long-pressing the multi-functional knob.

Specifications

FeatureDetail
Product Dimensions1.14 x 1.14 x 2.03 inches
Item Weight2.33 ounces (66 Grams)
Item Model NumberIDT-02
Battery1 Lithium Ion (650mAh)
MaterialPlastic
Number of Settings4 (Volume)
Screen Size2.03 Inches
Timer ModesCount-Up, Count-Down
Max Time99 minutes 59 seconds

Official Product Video

This video provides an overview of the INKBIRD Rechargeable Magnetic Timer IDT-02, demonstrating its features and functionality.

Warranty and Support

For warranty information or technical support, please refer to the official Inkbird website or contact customer service.

Visit the Inkbird Store for more products and information.

Related Documents - IDT-02

Preview INKBIRD TC816 Thermostat Timing Socket User Manual
User manual for the INKBIRD TC816 Thermostat Timing Socket, detailing its introduction, screen display precautions, operation instructions, temperature calibration, °C/°F selection, backlight mode, memory function, factory test, and technical parameters.
Preview Inkbird IDT-34C-B Sleep Micro-Motion Monitoring Belt User Manual
User manual for the Inkbird IDT-34C-B, a wearable device designed for micro-motion monitoring to track and analyze sleep patterns. Learn about its features, setup, and operation.
Preview INKBIRD IDT-34E-BW: Guida Utente Termometro BBQ Wireless Bluetooth e WiFi
Manuale utente completo per il termometro BBQ wireless INKBIRD IDT-34E-BW. Include istruzioni per l'uso, specifiche tecniche, diagramma del prodotto, definizioni dei tasti, gestione della batteria, pulizia, manutenzione, risoluzione dei problemi, requisiti FCC e avvisi IC.
Preview INKBIRD C236T Smart Plug-in Thermostat Timer User Manual
Comprehensive user manual for the INKBIRD C236T Smart Plug-in Thermostat Timer, detailing its features, specifications, operation modes, app connectivity, maintenance, troubleshooting, and FCC compliance.
Preview INKBIRD ISC-007BW Smoker Controller User Manual
Comprehensive user manual for the INKBIRD ISC-007BW Smoker Controller, detailing its features, specifications, setup, wireless connection (Wi-Fi and Bluetooth) via the Inkbird Pro app, basic operation, precautions, and FCC compliance information.
Preview INKBIRD IDT-22-B Smart Bluetooth Food Thermometer User Manual
Official user manual for the INKBIRD IDT-22-B Smart Bluetooth Food Thermometer. Learn about features, specifications, operation, app connection, troubleshooting, and safety.