Introduction
This instruction manual provides detailed guidance for the safe and effective use of your ALTSON 60 LED Portable Selfie Light. This slim and lightweight LED light is designed to enhance your visual presence for various applications, including photography, webcam use, makeup application, selfies, video conferencing, vlogging, live streaming, video recording, Zoom meetings, filming, and studio podcasts. With a high Color Rendering Index (CRI) of 97+, it delivers professional-grade lighting to complement natural skin tones and create desired light effects.
What's in the Box
Carefully unpack your ALTSON 60 LED Portable Selfie Light and ensure all items are present:
- 1x LED Video Light
- 1x Clip
- 1x USB-C Cable
- 1x 1/4’’ Nut Adapter
- 1x 1/4’’ Hot Shoe Mount
- 1x Storage Pouch
- 1x User Manual
Setup
Follow these steps to set up your ALTSON 60 LED Portable Selfie Light:
- Attach the Clip: Locate the clip accessory. Align the clip with the mounting slot on the back of the LED light and slide it in until it clicks securely into place.
- Mounting Options:
- For Phones/Tablets/Laptops: Use the integrated clip to attach the light directly to the top edge of your device. The clip's maximum open mouth is 1.3 inches (3.4 cm).
- For Cameras/Tripods/Selfie Sticks: Use the included 1/4-inch Nut Adapter or 1/4-inch Hot Shoe Mount. Attach the adapter/mount to the light's mounting slot, then secure it to your camera's hot shoe or a tripod/selfie stick with a 1/4-inch screw.
- Adjust Angle: The LED light panel features 160° rotation, allowing for precise light positioning. Rotate the knob on the clip or adapter to adjust the angle as needed.
Figure 1: Universal compatibility of the ALTSON 60 LED Portable Selfie Light with different devices and adjustable angle.
Operating Instructions
Familiarize yourself with the controls and functions of your LED light:
- Power On/Off: Press and hold the power button (usually marked with a circle and a vertical line) on the side of the light for approximately 3 seconds to turn the device on or off.
- Change Light Modes: The light offers 3 distinct modes: White, Natural, and Warm. Press the mode button (often indicated by a snowflake or sun icon) to cycle through these color temperatures (2500K-6500K).
- Adjust Brightness: Use the '+' and '-' buttons to increase or decrease the brightness level. There are 10 adjustable brightness levels to suit various lighting conditions.
Figure 2: Illustration of the three light modes and ten brightness levels available on the ALTSON 60 LED Portable Selfie Light.
Figure 3: Visual comparison showing the enhanced lighting effect provided by the ALTSON 60 LED Portable Selfie Light.
Charging the Battery
The ALTSON 60 LED Portable Selfie Light is equipped with a 2200mAh rechargeable Lithium Polymer battery. Use the provided USB-C cable for charging.
- Connect the USB-C end of the cable to the charging port on the side of the LED light.
- Connect the USB-A end of the cable to a compatible USB power source (e.g., wall adapter, computer USB port, power bank).
- The battery indicator lights on the device will show the charging status. A full charge typically takes approximately 3 hours.
- Battery life is approximately 15 hours at 10% brightness and 4 hours at 50% brightness.
Figure 4: Illustration of the built-in 2200mAh battery and USB-C charging port.
Maintenance
To ensure the longevity and optimal performance of your ALTSON 60 LED Portable Selfie Light, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe the surface of the light. Avoid using abrasive cleaners or solvents, as they may damage the finish or LED panel.
- Storage: When not in use, store the light in the provided storage pouch to protect it from dust and scratches. Keep it in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To maintain battery health, avoid fully discharging the battery frequently. If storing for an extended period, charge the battery to about 50% every few months.
- Handling: Handle the device with care. Avoid dropping it or subjecting it to strong impacts, which could damage internal components.
Troubleshooting
If you encounter any issues with your ALTSON 60 LED Portable Selfie Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Low battery or power button not pressed correctly. | Charge the device using the USB-C cable. Ensure the power button is pressed and held for 3 seconds. |
| Light is dim or flickers. | Low battery or brightness setting is too low. | Recharge the battery. Increase the brightness level using the '+' button. |
| Cannot change light mode/color. | Mode button not functioning or device malfunction. | Ensure the mode button is pressed firmly. If the issue persists, contact customer support. |
| Clip does not hold securely. | Clip not fully inserted or device/surface too thick. | Ensure the clip is fully engaged in the mounting slot. Check if the device/surface thickness is within the clip's maximum opening (1.3 inches / 3.4 cm). |
If these solutions do not resolve the issue, please contact ALTSON customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 3.9 x 2.8 x 0.78 inches (9.9 x 7.1 x 2 cm) |
| Item Weight | 5.9 ounces (167 grams) |
| Item Model Number | WLHJZD-W |
| Batteries | 1 Lithium Polymer battery (included) |
| Battery Capacity | 2200mAh |
| Battery Life | Up to 15 hours (at 10% brightness), 4 hours (at 50% brightness) |
| Connectivity Technology | USB |
| Hardware Interface | USB Type C |
| Color Temperature | 2500K-6500K (Warm, Natural, White) |
| Brightness Levels | 10 levels adjustable |
| CRI (Color Rendering Index) | 97+ |
Warranty and Support
Your ALTSON 60 LED Portable Selfie Light comes with a 24 Months Warranty. If you experience any problems or issues with your product, please do not hesitate to contact ALTSON customer support. We are committed to providing 100% satisfaction and will respond to your inquiries as soon as possible, typically within 24 hours.
For support, please refer to the contact information provided on the product packaging or the official ALTSON website.