PROSCAN PSP967

PROSCAN PSP967 Extreme Portable Bluetooth Speaker User Manual

Model: PSP967

1. Introduction

Thank you for purchasing the PROSCAN PSP967 Extreme Portable Bluetooth Speaker. This speaker is designed to deliver clear audio with versatile connectivity options, including Bluetooth, FM Radio, USB, TF Card, and AUX input. Its IPX6 water-resistant rating makes it suitable for various environments. Please read this manual thoroughly before using the device to ensure proper operation and to maximize your listening experience.

2. Package Contents

Verify that all items are present in your package:

3. Product Overview

Familiarize yourself with the speaker's components and controls.

PROSCAN PSP967 Extreme Portable Bluetooth Speaker with top controls and carrying hook

Image: Front and top view of the PROSCAN PSP967 speaker, showing the speaker grille, control buttons on top, and the integrated carrying hook.

Control Buttons (Top Panel)

Ports (Rear/Side Panel, typically under a protective flap)

4. Charging the Speaker

The speaker is powered by a built-in rechargeable battery. Before first use, fully charge the speaker.

  1. Locate the USB charging port, usually protected by a rubber flap to maintain water resistance.
  2. Connect the small end of the included USB charging cable to the speaker's charging port.
  3. Connect the larger end of the USB cable to a USB power adapter (not included) or a computer's USB port.
  4. The charging indicator light will illuminate (color may vary, refer to device for specific indication).
  5. Charging typically takes 3-4 hours for a full charge. The indicator light will change or turn off once charging is complete.

Note: Do not use the speaker while it is charging to ensure optimal battery life and safety. Ensure the protective flap is securely closed after charging to maintain water resistance.

5. Initial Setup and Bluetooth Pairing

Powering On/Off

Bluetooth Pairing

After powering on, the speaker will automatically enter Bluetooth pairing mode if no other mode is selected. The LED indicator will flash rapidly, indicating it is ready to pair.

  1. Ensure the speaker is powered on and in Bluetooth mode (LED flashing rapidly).
  2. On your Bluetooth-enabled device (smartphone, tablet, computer), go to the Bluetooth settings.
  3. Search for available devices. You should see "PSP967" or a similar name in the list.
  4. Select "PSP967" to connect. Once paired, you will hear a confirmation sound, and the LED indicator will stop flashing and remain solid.
  5. You can now stream audio wirelessly from your device to the speaker.

Note: The speaker will automatically attempt to reconnect to the last paired device when powered on, if that device is within range and has Bluetooth enabled.

6. Operating the Speaker

Switching Modes

Press the Mode (M) button repeatedly to cycle through available modes: Bluetooth → FM Radio → USB → TF Card → AUX-in.

Bluetooth Mode

FM Radio Mode

To improve FM reception, ensure the USB charging cable is connected to the speaker (it acts as an antenna), but not necessarily connected to a power source.

USB / TF Card Mode

Insert a USB flash drive or TF (MicroSD) card into the respective port. The speaker will automatically switch to the corresponding mode and begin playing audio files.

AUX-in Mode

Connect an external audio device (e.g., MP3 player, laptop) to the speaker's AUX-in port using a 3.5mm audio cable (not included).

7. True Wireless Stereo (TWS) Pairing

The TWS feature allows you to connect two PSP967 speakers together for a stereo sound experience.

  1. Ensure both PSP967 speakers are powered on and are NOT connected to any Bluetooth device.
  2. On one of the speakers (this will be your primary speaker), short press the TWS button. You will hear an audible prompt, and the speaker will begin searching for another TWS speaker.
  3. The two speakers will automatically connect to each other. You will hear a confirmation sound once TWS pairing is successful.
  4. Now, connect your Bluetooth-enabled device to the primary speaker (the one you pressed the TWS button on) as described in the "Bluetooth Pairing" section.
  5. Audio will now play in stereo across both speakers.

To Disconnect TWS: Press the TWS button on either speaker, or power off one of the speakers.

8. Maintenance and Care

9. Troubleshooting

ProblemPossible Solution
Speaker does not power on.Ensure the battery is charged. Connect the speaker to a power source using the USB charging cable.
Cannot pair with Bluetooth device.
  • Ensure the speaker is in Bluetooth pairing mode (LED flashing).
  • Make sure Bluetooth is enabled on your device.
  • Move the speaker closer to your device (within 10 meters / 33 feet).
  • Forget "PSP967" from your device's Bluetooth list and try pairing again.
  • Ensure no other devices are currently connected to the speaker.
No sound or low volume.
  • Increase the volume on both the speaker and your connected device.
  • Ensure the speaker is not muted.
  • Check if the audio cable is properly connected in AUX mode.
  • For USB/TF card mode, ensure the audio files are in a supported format.
Poor FM radio reception.Connect the USB charging cable to the speaker (it acts as an antenna) and reposition the speaker for better signal.
TWS pairing fails.
  • Ensure both speakers are PSP967 models and are not connected to any other Bluetooth device.
  • Place speakers close to each other during pairing.
  • Try powering both speakers off and on again, then re-attempt TWS pairing.

10. Technical Specifications

Model NamePROSCAN PSP967 Extreme
Bluetooth Version(Not specified in product data)
Bluetooth Operating DistanceUp to 10 meters (33 feet)
Water RatingIPX6 Water Resistant
Play TimeUp to 5-6 hours (at medium volume)
Charge Time3-4 hours
InputsBluetooth, FM Radio, USB, TF Card, AUX-in
Speaker Output Power3 Watts
Frequency Response20 KHz
Product Dimensions6.4D x 12.7W x 11.4H Centimetres (approx. 2.5D x 5W x 4.5H inches)
Weight1.52 kg (approx. 3.35 lbs)
Battery Type1 Lithium Ion battery (included)

11. Important Safety Information

12. Warranty and Support

This PROSCAN PSP967 speaker comes with a 90-Day Limited Manufacturer Warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use.

The warranty does not cover:

For warranty claims or technical support, please contact your retailer or the manufacturer directly. Please retain your proof of purchase for warranty service.

Manufacturer: Curtis International

Place of Business: Mississauga, ON L5S 2A4

Related Documents - PSP967

Preview Proscan PSP967 Bluetooth Speaker User Manual
User manual for the Proscan PSP967 Bluetooth Speaker, detailing features, operation, wireless connection, music playback, charging, and warranty information.
Preview Proscan PSP328 Bluetooth Speaker Instruction Manual
Instruction manual for the Proscan PSP328 Bluetooth Speaker, covering Bluetooth, AUX IN, and FM radio modes, with warranty information.
Preview Proscan PSP776-DG Bluetooth Speaker User Manual and Warranty Information
Detailed information about the Proscan PSP776-DG Bluetooth Light Up Speaker, including features, specifications, and a 90-day warranty guide. Learn how to use and claim warranty for your Proscan speaker.
Preview Proscan Elite 13.3" Swivel Screen Portable DVD Player User Manual
This user manual provides comprehensive instructions for the Proscan Elite 13.3" Swivel Screen Portable DVD Player (Model No.: PEDVD1332), covering setup, operation, features, troubleshooting, and warranty information.
Preview PROSCAN PSP853 Portable Bluetooth Speaker - User Manual & Features
Comprehensive user manual for the PROSCAN PSP853 portable Bluetooth speaker. Learn about features, specifications, operation, safety, and warranty information from PROSCAN.
Preview PROSCAN 37" Sound Bar Speaker User Manual | Model PSB3713-B
Comprehensive user manual for the PROSCAN 37" Sound Bar Speaker (Model PSB3713-B). Learn about safety instructions, mounting, product overview, remote control, power, time setting, FM radio, AUX input, Bluetooth connectivity, and specifications.