Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your YSRSAI ARGB LED Strip Lights. Please read these instructions carefully before use to ensure optimal performance and safety.
Safety Information
- Ensure the power is off before installation or maintenance.
- This product is designed for 5V 3-pin ARGB headers only. Do NOT connect to 12V RGB headers, as this will damage the product and potentially your motherboard.
- Keep the LED strips away from water or high humidity, as they are not waterproof.
- Avoid bending the strips excessively to prevent damage to the LEDs or internal wiring.
- Do not attempt to disassemble or modify the product.
Package Contents
Your package should contain the following items:
- 2 x YSRSAI ARGB LED Strip Lights (30cm each)
Specifications
| Feature | Specification |
|---|---|
| Model Number | YSR-CGD-RGB |
| Dimensions (L x W x H) | 30 x 2 x 1.6 cm (each strip) |
| Weight | 40 grams (each strip) |
| Voltage | 5 Volts DC |
| Light Source Type | Addressable RGB (ARGB) LED |
| Number of LEDs | 38 LEDs per strip |
| Connector Type | 3-pin ARGB (5V) |
| Material | Aluminum |
| Mounting | Magnetic (double-sided suction) |
| Waterproof Level | Not waterproof |
| Remote Control | Not included (controlled via motherboard software) |
| Compatibility | ASUS Aura Sync, MSI Mystic Light Sync (J-Rainbow 3-pin/5V), ASRock Polychrome RGB, GIGABYTE RGB Fusion/Fusion 2.0 (5V 3-pin ARGB headers) |
The strips feature high-density lamp beads, ensuring no dark spots and a smooth, continuous lighting effect.
Image: The ARGB LED strip highlighting its high-density lamp beads for uniform illumination and showing its 30cm length and 1.6cm width.
Setup and Installation
- Prepare your PC Case: Ensure your computer is powered off and unplugged from the wall outlet. Open your PC case to access the interior.
- Identify ARGB Header: Locate a 5V 3-pin ARGB header on your motherboard. These are typically labeled as 'ADD_HEADER', 'J-RAINBOW', or similar, and have 3 pins with a gap for the fourth pin (often marked as 5V, D, G). Do NOT connect to 12V 4-pin RGB headers.
Image: Illustration of a motherboard showing the correct 5V 3-pin ARGB header (marked with a green check) and an incompatible 12V 4-pin RGB header (marked with a red X).
- Magnetic Installation: The YSRSAI ARGB LED strips feature double-sided magnetic suction. Simply place the strip onto any metallic surface inside your PC case. The magnets will securely hold it in place without the need for adhesives.
Image: A YSRSAI ARGB LED strip shown installed magnetically on the bottom of a PC case, illuminating the interior.
Image: A visual representation of the magnetic attachment mechanism, showing the strip adhering to a metal surface within a computer case.
- Connect the Strip: Connect the 3-pin ARGB connector from the LED strip to the identified 5V 3-pin ARGB header on your motherboard. Ensure the connection is firm and correctly oriented.
Image: A detailed diagram illustrating how to connect the 3-pin ARGB cable from the LED strip to the 5V ARGB header on a compatible motherboard.
- Cable Management: Route the cables neatly to avoid interference with other components and to maintain good airflow.
- Close Case and Power On: Once all connections are secure, close your PC case, plug it back in, and power it on.
Operating Instructions
The YSRSAI ARGB LED Strip Lights are controlled via your motherboard's ARGB synchronization software. This allows for a wide range of lighting effects and color customization.
- Install Motherboard Software: If you haven't already, install the appropriate ARGB control software for your motherboard (e.g., ASUS Aura Sync, MSI Mystic Light Sync, ASRock Polychrome RGB, GIGABYTE RGB Fusion).
- Launch Software: Open the installed ARGB control software on your computer.
- Customize Lighting: Within the software, you can select various lighting modes, colors, brightness levels, and effects. The 38 addressable LEDs per strip allow for complex and dynamic lighting patterns.
Image: A screenshot of the ASUS Aura Sync software interface, demonstrating color selection and effect customization for ARGB devices.
Image: A collage showing several ARGB LED strips illuminated with different vibrant color gradients and patterns, demonstrating the customization possibilities.
- Synchronize Effects: The software allows you to synchronize the lighting effects across all compatible ARGB components connected to your motherboard.
Maintenance
To ensure the longevity and appearance of your ARGB LED strips, follow these simple maintenance guidelines:
- Cleaning: Gently wipe the surface of the LED strips with a soft, dry, anti-static cloth. Do not use liquid cleaners or abrasive materials.
- Dust Removal: Periodically use compressed air to remove dust accumulation from the strips and surrounding areas within your PC case.
- Avoid Physical Stress: Do not apply excessive force or bend the strips sharply.
Troubleshooting
If you encounter issues with your YSRSAI ARGB LED Strip Lights, please refer to the following common solutions:
- LED Strips Not Lighting Up:
- Ensure the PC is powered on.
- Verify that the 3-pin ARGB connector is securely plugged into the 5V 3-pin ARGB header on your motherboard.
- Confirm that you are using a 5V 3-pin ARGB header, not a 12V 4-pin RGB header. Connecting to a 12V header will prevent the strips from working and may cause damage.
- Check your motherboard's ARGB software to ensure the lighting is enabled and not set to an 'off' or 'black' color profile.
- Incorrect Colors or Effects:
- Ensure your motherboard's ARGB software is up to date.
- Verify that the correct ARGB device is selected within the software for customization.
- Try restarting your computer and the ARGB software.
- Strip Becomes Loose:
- The magnetic attachment should be strong on metallic surfaces. If the strip becomes loose, ensure the surface is clean and free of dust or debris.
- Re-position the strip to a flatter, more suitable metallic area if necessary.
- Physical Damage (e.g., cable detachment):
- If you observe any physical damage such as a detached cable at the solder point, this indicates a manufacturing defect. Please contact customer support for assistance under warranty. Do not attempt to repair it yourself, as this may void your warranty.
Warranty
YSRSAI provides a warranty of up to 1 year from the date of purchase for this product. This warranty covers manufacturing defects and issues arising from normal use. Please retain your proof of purchase for warranty claims.
Support
If you encounter any problems during the use of this product or require further assistance, please contact YSRSAI customer support. We aim to respond to all inquiries within 24 hours.
For support, please refer to the contact information provided with your purchase or on the official YSRSAI website.