1. Introduction
This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your BLACK+DECKER Oscillating Space Heater, Model BHT907R. Please read all instructions carefully before using the appliance and retain this manual for future reference.
Figure 1: The BLACK+DECKER Oscillating Space Heater (Model BHT907R) and its remote control.
2. Important Safety Information
WARNING: To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using this appliance.
- Read all instructions before using this heater.
- Do not use this heater in bathrooms, laundry areas, or similar indoor locations where it may come into contact with water.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Always unplug heater when not in use.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- This heater includes a Tip-Over Safety Switch and Overheat Protection for enhanced safety.
3. Package Contents
Upon opening the package, ensure all items are present and in good condition:
- BLACK+DECKER Oscillating Space Heater (Model BHT907R)
- Remote Control (Battery not included - requires 1x CR2025 battery)
- User Manual
Figure 2: The remote control is included with the heater. Please note that the battery (CR2025) is not included and must be purchased separately.
4. Setup
- Unpack the heater and all accessories from the box. Remove any packaging materials.
- Place the heater on a firm, level surface. Ensure it is at least 3 feet (0.9 m) away from walls, furniture, and other objects.
- Insert one CR2025 battery into the remote control.
- Plug the heater's power cord directly into a 120V AC wall outlet. Do not use extension cords or power strips.
5. Operating Instructions
The heater features an LED display and touch controls on the top panel, as well as a remote control for convenient operation.
Figure 3: The heater's LED display and electronic thermostat provide clear temperature readings and control options.
5.1 Power On/Off
- Press the Power Button (
) on the control panel or remote to turn the heater on or off.
5.2 Heat Settings
The heater offers three operational modes:
- Fan Only: Provides air circulation without heat.
- Low Heat (1000W): For moderate heating needs.
- High Heat (1500W): For maximum heating output.
Press the Mode Button (
) repeatedly to cycle through Fan Only, Low Heat, and High Heat modes.
Figure 4: The heater provides two heat settings (1000W and 1500W) in addition to a fan-only mode.
5.3 Electronic Thermostat
The electronic thermostat allows you to set your desired room temperature. Use the Up () and Down () arrow buttons on the control panel or remote to adjust the temperature. The LED display will show the set temperature.
5.4 Oscillation Function
To distribute heat evenly across a wider area, activate the oscillation function.
- Press the Oscillation Button () on the control panel or remote. The heater will begin to oscillate up to 70 degrees.
- Press the button again to stop oscillation at the current position.
Figure 5: The heater features a 70-degree oscillation function to spread warmth efficiently throughout your space.
5.5 Auto Shut-Off Timer
The timer allows you to set the heater to automatically turn off after a specified period.
- Press the Timer Button () on the control panel or remote.
- Each press will increase the timer setting by 0.5 hours (30 minutes), up to a maximum of 8 hours.
- The LED display will show the remaining time. Once the set time expires, the heater will turn off.
Figure 6: The auto shut-off timer can be set for up to 8 hours, allowing for convenient and safe operation.
6. Features Overview
- Compact & Portable Design: Measuring 4.6"D x 4.68"W x 13.75"H and weighing 2.75 pounds, this tower heater is designed for easy placement and portability.
- Dual Heat Settings: Choose between Low (1000W) and High (1500W) heat settings, plus a fan-only mode.
- Oscillation: 70-degree oscillation ensures wide heat distribution.
- LED Display & Electronic Thermostat: Provides clear temperature readings and precise control.
- Remote Control: Adjust settings conveniently from a distance.
- Auto Shut-Off Timer: Program the heater to turn off automatically after up to 8 hours.
- Tip-Over Protection: Automatically shuts off the heater if it is accidentally knocked over.
- Overheat Protection: Automatically shuts off the heater if it detects an internal overheating condition.
Figure 7: The heater's tip-over protection automatically deactivates the unit if it is not upright, enhancing safety.
7. Maintenance
Regular cleaning helps maintain the heater's performance and extends its lifespan.
- Always unplug the heater and allow it to cool completely before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces of the heater. Do not use abrasive cleaners or harsh chemicals.
- Do not immerse the heater in water or allow water to drip into the interior.
- For storage, keep the heater in its original packaging in a cool, dry place.
8. Troubleshooting
If your heater is not operating correctly, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | Not plugged in securely. Power outlet not working. Tip-over switch activated. Overheat protection activated. | Ensure the power cord is firmly plugged into a working 120V AC outlet. Check the circuit breaker. Ensure the heater is on a flat, stable surface and upright. Unplug the heater, let it cool for 30 minutes, then plug it back in. |
| No heat output. | Heater is in Fan Only mode. Thermostat set too low. | Press the Mode button to select Low Heat or High Heat. Increase the thermostat setting using the Up arrow button. |
| Oscillation not working. | Oscillation function not activated. | Press the Oscillation button to activate the function. |
| Remote control not working. | Battery is dead or incorrectly inserted. Obstruction between remote and heater. | Replace the CR2025 battery, ensuring correct polarity. Remove any objects blocking the line of sight between the remote and the heater. |
9. Specifications
| Attribute | Detail |
|---|---|
| Brand | BLACK+DECKER |
| Model Number | BHT907R |
| Product Dimensions | 4.6"D x 4.68"W x 13.75"H |
| Item Weight | 2.75 pounds |
| Color | Black |
| Form Factor | Tower |
| Indoor/Outdoor Usage | Indoor |
| Recommended Uses | Desk, Garage, Home, Indoor, Office |
| Mounting Type | Floor Mount |
| Room Type | Bedroom, Dining Room, Home Office, Living Room, Study Room |
| Heating Coverage | Up to 200 square feet |
| Fuel Type | Electric |
| Number of Speeds | 2 (Low/High Heat) |
| Voltage | 120 Volts |
| Amperage | 12.5 Amps |
| UPC | 810064694851 |
| Included Components | Heater, Manual, Remote Control |
10. Warranty and Support
This BLACK+DECKER product comes with a 1-year limited warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please visit the official BLACK+DECKER website or contact their customer service. You may also refer to the full User Manual (PDF) for additional information.
