Adiding Solar Outdoor Lights

1. Product Overview

The Adiding Solar Outdoor Light is a high-brightness, solar-powered LED floodlight designed for outdoor security and illumination. It features 202 high-quality LED beads, providing approximately 2800 lumens of 6500K daylight illumination with a wide 180° lighting angle. The unit includes an efficient solar panel, a motion sensor, and a remote control for convenient operation. Its durable, waterproof design ensures reliable performance in various weather conditions.

Image: The Adiding Solar Outdoor Light system, showing the main light unit with motion sensor, the separate solar panel, and the remote control.

2. Package Contents

Please verify that all components are present in the package:

• Solar Panel (1 unit)
• Motion Sensor Light (1 unit)
• Remote Controller (1 unit)
• Installation Accessories (1 set)

3. Specifications

4. Installation

The Adiding Solar Outdoor Light offers flexible installation options: integrated or separated, thanks to its 16.4 ft extension cable. Choose a location that receives ample direct sunlight for the solar panel.

4.1 Choosing an Installation Location

• Solar Panel: Mount the solar panel in a location that receives 6-8 hours of direct sunlight daily. Avoid areas with shadows from trees, buildings, or other obstructions.
• Light Unit: Install the light unit on walls, eaves, fences, poles, or rooftops at a recommended height of 6-10 feet for optimal motion detection and illumination coverage.
• Ensure the motion sensor is not obstructed and faces the area you wish to monitor.

Image: Illustration demonstrating how to install the solar panel in an optimal location, avoiding shadows and interference from other light sources.

4.2 Installation Steps

1. Connect the Solar Panel and Light: Securely connect the cable from the solar panel to the light unit.
2. Charge the Solar Panel: Before first use, place the solar panel in direct sunlight for 1-2 days to ensure a full charge.
3. Activate the Light: Press the power button on the light unit to activate it.
4. Prepare Remote Control: Pull out the transparent insulating sheet from the remote controller.
5. Test and Select Mode: Cover the solar panel (to simulate darkness) and use the remote control to test the light and select your desired lighting mode.

Image: A visual guide illustrating the five steps for connecting, charging, activating, and testing the solar outdoor light system.

Image: Comparison of integrated and separated installation methods, highlighting the flexibility provided by the extension cable.

5. Operating Instructions

The Adiding Solar Outdoor Light features a remote control for selecting between three distinct lighting modes:

• Mode 1: Motion Sensor Only (OFF > High Light > OFF)
  The light remains OFF until motion is detected. Upon detection, it illuminates at high brightness for a set duration (typically 15-30 seconds) and then turns OFF again if no further motion is detected. This mode is recommended for security and energy saving.


Image: Visual representation of Mode 1 operation, where the light activates to high brightness only when motion is detected.

• Mode 2: Dim Light + Motion Sensor (Dim > High Light > Dim)
  The light stays on at a dim brightness continuously in darkness. When motion is detected, it switches to high brightness for a set duration, then returns to dim brightness if no further motion is detected. This mode provides constant ambient lighting with increased brightness for security.


Image: Visual representation of Mode 2 operation, where the light maintains a dim state and brightens upon motion detection.

• Mode 3: Dim Light Stays ON (All Night)
  The light remains on at a constant dim brightness throughout the night, without motion sensor activation. This mode is suitable for continuous low-level illumination.


Image: Visual representation of Mode 3 operation, where the light provides continuous dim illumination throughout the night.

Use the remote control to cycle through these modes or to turn the light ON/OFF.

6. Maintenance

The Adiding Solar Outdoor Light is designed for minimal maintenance due to its durable and weather-resistant construction.

• Cleaning: Periodically wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris that may accumulate and reduce charging efficiency. Ensure the light sensor and motion sensor lenses are also clean.
• Weather Resistance: The unit is waterproof, frost-resistant, and heat-resistant, suitable for operating in temperatures from -4°F to 140°F. No special weather-proofing is typically required after installation.
• Ventilation: The light unit includes small vent holes to prevent internal fogging and allow any seeped water to drain out. Ensure these holes remain clear.

Image: An illustration highlighting the product's weather resistance (rain, snow, heat) and the function of its small vent holes for drainage and anti-fogging.

7. Troubleshooting

If you encounter issues with your Adiding Solar Outdoor Light, please refer to the following common troubleshooting steps:

• Light Not Turning On at Night:
  • Ensure the solar panel is receiving sufficient direct sunlight (6-8 hours daily) and is not obstructed by shadows.
  • Verify the light unit is activated by pressing its power button.
  • Check if the remote control's insulating sheet has been removed and the remote has fresh batteries.
  • Confirm the selected lighting mode is appropriate for nighttime operation (e.g., Mode 1, 2, or 3).
• Motion Sensor Not Detecting:
  • Ensure the motion sensor lens is clean and free from obstructions.
  • Verify the light is installed at the recommended height (6-10 ft) and the sensor is facing the desired detection area.
  • Test the sensor by walking within its 120° detection range.
• Light Stays Dim or Does Not Reach Full Brightness:
  • The solar panel may not be fully charged. Allow more time for charging in direct sunlight.
  • Clean the solar panel to maximize charging efficiency.
  • Ensure the ambient temperature is within the operating range (-4°F to 140°F). Extreme cold can affect battery performance.

8. Warranty and Support

Adiding stands behind its products. This product comes with a 2-year replacement support. For any issues or inquiries, Adiding provides 24-hour customer support to assist you with the best lighting solutions.

Please refer to your purchase documentation or the official Adiding website for specific contact information and warranty claim procedures.