Introduction
Thank you for choosing the NEDIS Bluetooth 5.0 Wireless Neck Speaker. This manual provides essential information for the safe and efficient use of your device. Please read these instructions carefully before use and retain them for future reference.
Figure 1: User wearing the NEDIS Bluetooth Neck Speaker, demonstrating comfortable fit.
What's in the Box
- NEDIS Bluetooth 5.0 Wireless Neck Speaker (SPBT5010BK)
- USB Charging Cable
- User Manual
Product Overview
Speaker Components
Figure 2: Internal speaker components and power input details.
The neck speaker features two 4.5W peak power speakers for a total of 9W output, delivering clear stereo sound. It is powered by a 5V DC input.
Controls and Ports
Figure 3: Integrated controls including power button and volume/track change buttons.
- Power Button: Used to turn the speaker on/off.
- Volume/Track Change Buttons: Adjust volume and skip tracks.
- Charging Port: Micro USB port for charging the device.
- Built-in Microphone: For hands-free calling.
Setup
1. Charging the Speaker
Before first use, fully charge the neck speaker. Use the provided USB charging cable.
- Connect the small end of the USB cable to the charging port on the neck speaker.
- Connect the larger end of the USB cable to a USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate. Once fully charged (approximately 2 hours), the light will change or turn off.
A full charge provides up to 6 hours of playtime at 50% volume and up to 120 hours of standby time.
Figure 4: Charging port and battery life information.
2. Bluetooth Pairing
To connect the neck speaker to your device:
- Ensure the neck speaker is charged.
- Press and hold the Power button until the indicator light flashes, indicating pairing mode.
- On your smartphone or tablet, enable Bluetooth and search for available devices.
- Select "NEDIS SPBT5010BK" from the list of devices.
- Once connected, the indicator light will stop flashing and remain solid.
The speaker will automatically attempt to reconnect to the last paired device when powered on.
Operating Instructions
Power On/Off
- To Power On: Press and hold the Power button for approximately 3 seconds.
- To Power Off: Press and hold the Power button for approximately 3 seconds.
Music Playback
- Play/Pause: Press the Power button once.
- Next Track: Press the '+' button.
- Previous Track: Press the '-' button.
- Volume Up: Press and hold the '+' button.
- Volume Down: Press and hold the '-' button.
Hands-Free Calling
Figure 5: The built-in microphone enables convenient hands-free communication.
- Answer Call: Press the Power button once when a call comes in.
- End Call: Press the Power button once during a call.
- Reject Call: Press and hold the Power button for approximately 2 seconds when a call comes in.
Maintenance
- Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid exposing the speaker to extreme temperatures, direct sunlight, or high humidity.
- The speaker is water resistant; however, do not submerge it in water.
- Store the speaker in a cool, dry place when not in use for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not turn on. | Battery is low or depleted. | Charge the speaker fully. |
| Cannot pair with device. | Speaker is not in pairing mode. Bluetooth is off on device. Device is too far. | Ensure speaker is in pairing mode. Turn on Bluetooth on your device. Move device closer to speaker (within 10 meters). |
| No sound or low volume. | Volume is too low on speaker or device. Speaker is not connected. | Increase volume on both speaker and connected device. Re-pair the speaker if disconnected. |
| Poor call quality. | Weak Bluetooth connection. Obstructions. | Move closer to the connected device. Ensure no major obstructions between speaker and device. |
Specifications
| Feature | Detail |
|---|---|
| Brand | NEDIS |
| Model Number | SPBT5010BK |
| Connectivity Technology | Bluetooth 5.0 |
| Audio Output Mode | Stereo |
| Speaker Maximum Output Power | 9 Watts (2 x 4.5W peak) |
| Frequency Response | 20 KHz |
| Battery Average Life | Up to 6 Hours (at 50% volume) |
| Control Method | Touch, Button |
| Water Resistance Level | Water Resistant |
| Item Weight | 280 Grams |
| Item Dimensions (D x W x H) | 5.5D x 20.8W x 36H Centimeters |
| Country of Origin | China |
Warranty and Support
Warranty Information
This NEDIS product is covered by a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and faults under normal use conditions.
Customer Support
For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or the NEDIS customer service department. Refer to the contact information provided with your purchase documentation or visit the official NEDIS website for support details.
