Funistree Lily Flower Dimmable Candle Warmer Lamp with Timer User Manual

1. Introduction

Thank you for choosing the Funistree Lily Flower Dimmable Candle Warmer Lamp. This product is designed to melt jar candles from the top down using a halogen bulb, releasing fragrance without an open flame. It features adjustable brightness and a timer function to enhance your home ambiance safely and conveniently.

2. Important Safety Instructions

• Read all instructions before use.
• This appliance is for indoor use only. Do not use outdoors or in wet conditions.
• Keep the lamp away from water or other liquids.
• Ensure the power cord is not damaged. Do not operate with a damaged cord or plug.
• Always place the lamp on a stable, flat, heat-resistant surface.
• Keep out of reach of children and pets.
• Do not touch the bulb or the area directly beneath it when the lamp is on or immediately after turning it off, as it will be hot.
• Use only GU10 50-watt halogen bulbs as replacements.
• Do not leave the lamp unattended for extended periods. Utilize the timer function for safety.
• Ensure the candle jar is free from cracks or damage before placing it under the lamp.

3. Package Contents

Verify that all items are present in the package:

• 1 x Candle Warmer Lamp (Lily Flower design)
• 2 x GU10 50-watt Halogen Bulbs (1 for use, 1 spare)
• 1 x Instruction Manual

4. Setup

1. Unpack Components: Carefully remove all items from the packaging.
2. Assemble the Lamp: The lamp typically comes pre-assembled. If not, securely attach the metal post to the wooden base and then the glass lampshade to the top of the metal post.
3. Install the Bulb: Gently screw one of the provided GU10 50-watt halogen bulbs into the socket located inside the lampshade. Ensure it is tightened securely but do not overtighten.
4. Position the Lamp: Place the assembled lamp on a stable, flat surface.
5. Place Candle: Position your jar candle (maximum height 5.5 inches) on the wooden base directly beneath the bulb.
6. Connect Power: Plug the power cord into a standard 110V AC electrical outlet.

Figure 1: Product components and dimensions. The lamp measures 10.7 inches in height, with a 5.4-inch wide base.

5. Operation

The lamp is controlled via an inline switch on the power cord.

1. Power On/Off: Press the power button (circle with a vertical line) on the inline switch to turn the lamp on or off. The lamp will illuminate at its highest brightness setting when first turned on.
2. Adjust Brightness (Dimmer): Use the '+' and '-' buttons on the inline switch to adjust the brightness of the bulb. There are multiple brightness levels. Higher brightness results in faster wax melting and stronger fragrance release.
3. Set Timer: Press the timer button (clock icon) to set an automatic shut-off time. You can cycle through 2-hour, 4-hour, and 8-hour settings. An indicator light will show the selected timer duration. The lamp will automatically turn off after the set time.

Figure 2: The candle warmer lamp in use, providing warm light and fragrance.

Figure 3: Brightness adjustment levels for controlling fragrance intensity.

6. Maintenance

• Cleaning: Disconnect the power before cleaning. Wipe the lamp and base with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
• Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled completely. Unscrew the old bulb and replace it with a new GU10 50-watt halogen bulb.
• Wax Management: After several uses, the top layer of wax may lose its scent. You can carefully pour off the melted, unscented wax (once cooled) to expose fresh wax below, or replace the candle.

7. Troubleshooting

8. Specifications

9. Warranty and Support

Funistree offers a 1-year warranty for this product. If you encounter any issues or require assistance, please contact Funistree customer support. They are committed to providing quality after-sales service and will replace the product if anything goes wrong within the warranty period.

For support, please refer to the contact information provided in your purchase documentation or visit the official Funistree website.